• Physical Therapy Korea
• /
• v.25 no.2
• /
• pp.62-70
• /
• 2018

Background: The craniocervical flexion (CCF) exercise is one of the effective exercise in correcting forward head posture (FHP). However, some people with FHP achieve CCF with compensatory movements, for example, low cervical flexion using superficial neck flexors such as the sternocleidomastoid (SCM) muscle. No study has yet investigated whether a dual­pres ure biofeedback unit (D-PBU) method to prevent low cervical flexion would be helpful in performing pure CCF movement. Objects: The purpose of this study was to compare the effects of the CCF using D-PBU method and the traditional CCF method on the cross-sectional area (CSA) of the longus colli muscle (LCM) and the activity of SCM muscle in subjects with FHP. Methods: Twenty­four FHP subjects (male: 16, female: 8) were recruited for this study. All subjects performed CCF using two different methods: the traditional CCF method and the CCF using D-PBU method. The CSA of the LCM was measured via ultrasound, and surface electromyography was used to measure SCM muscle activity. Results: The change in CSA of the LCM was significantly larger during the CCF using D-PBU method ($1.28{\pm}.09$) compared with the traditional CCF method ($1.19{\pm}.08$) (p<.05). The SCM muscle activity using the CCF using D-PBU method ($2.01{\pm}1.97$ %MVIC) was significantly lower than when using the traditional CCF method ($2.79{\pm}2.32$ %MVIC) (p<.05). Conclusion: The CCF using D-PBU method can be recommended for increasing LCM activation and decreasing SCM muscle activity during CCF movement in subjects with FHP.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.110-120
• /
• 2017

Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.

• Journal of Korea Multimedia Society
• /
• v.17 no.1
• /
• pp.77-93
• /
• 2014

Kinetic typography has been suggested to express emotions in computer-mediated communication (CMC) by empowering static texts with dynamic attributes, where conversations occur primarily in text-based forms. In this work, we investigate whether pre-defined kinetic typography effects are capable of delivering emotions, and further, which specific attributes of kinetic typography arouse such emotions. The results show that emotional response of users were corresponding to the emotions intended by experts, indicating that pre-defined kinetic typography is an applicable way to express emotions consistently in CMC. Also, results demonstrate some key attributes that derive certain levels of mood and energy respectively. Energy level turned out to be affected by the font size, transparency, direction of movement, amount of movement, velocity, and acceleration of the text, while mood level was influenced by the transparency, direction of movement, regularity in movement, and speed of the text.

• Physical Therapy Korea
• /
• v.24 no.4
• /
• pp.77-83
• /
• 2017

Background: Shoulder external rotation exercises are commonly used to improve the stabilizing ability of the infraspinatus. Although the side-lying wiper exercise (SWE) is the most effective shoulder external rotation exercise to maximize infraspinatus activity, the effect of adduction force on the infraspinatus and posterior deltoid has not been demonstrated. Objects: This study was conducted to investigate whether horizontal adduction force increases infraspinatus activity and decreases posterior deltoid activity. Methods: Twenty-eight healthy subjects (male: 21, female: 7; $age=23.5{\pm}1.8years$; $height=170.1{\pm}7.4cm$; $weight=69.4{\pm}9.6kg$) were recruited. Subjects were asked to perform the SWE under two conditions: (1) general SWE and (2) SWE with adduction force using pressure biofeedback. Surface electromyography (EMG) signals of the infraspinatus and posterior deltoid were recorded during SWE. Paired t-tests were used to compare the EMG activity of the infraspinatus and posterior deltoid between the two conditions. Results: Posterior deltoid muscle activity was significantly decreased following SWE with adduction force ($7.53{\pm}4.52%$) relative to general SWE ($11.68{\pm}8.42%$) (p<.05). However, there was no significant difference in the infraspinatus muscle activity between the SWE with adduction force ($28.33{\pm}12.16%$) and the general SWE ($26.54{\pm}13.69%$) (p>.05). Conclusion: Horizontal adduction force while performing SWE is effective at decreasing posterior deltoid activity.

• Journal of the Korean Society of Physical Medicine
• /
• v.6 no.2
• /
• pp.215-223
• /
• 2011

Purpose: The purpose of this study was to determine the effect of leg muscle activation by applying proprioceptive neuromuscular facilitation (PNF) arm patterns to unilateral upper extremities under the condition of both open and closed kinetic chains in a seated position. Methods: Twenty-two healthy subjects participated in this study. Four PNF patterns were applied to each subject's unilateral upper extremity. EMG data were collected from the vastus medialis, biceps femoris, tibialis anterior and gastrocnemius. The measured EMG data were digitized and processed to root mean square (RMS) and expressed as percentage maximal voluntary isometric contraction (%MVIC). The data were analyzed using two-way analysis of variance (ANOVA) with repeated measures to determine the statistical significance. Results: The results of this study were summarized as follows: Firstly, in comparison to muscle activation of the biceps femoris, there was a significant increase in the D2 flexion pattern when it was compared with D2 extension pattern and when it was compared with D1 flexion pattern (p<.05). Secondly, there was a significant increase in the muscle activation of the vastus medialis and tibialis anterior with a closed kinetic chain rather than an open kinetic chain (p<.05). Conclusion: In conclusion, in order to increase muscle activation of the biceps femoris, the D2 flexion pattern can be applied, regardless of kinetic chain. In addition, in order to increase muscle activation of the vastus medialis and tibialis anterior, four arm patterns can be applied with a closed kinetic chain.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.658-664
• /
• 2006

$\rho$, $\alpha$-dimethyl benzyl alcohol was resolved by the biphasic dynamic kinetic resolution (DKR). Acidic zeolite was used as a racemization catalyst while immobilized enzyme was employed for kinetic resolution. The effects of the process variables including nature of acyl donor, reaction temperature, substrate concentration, ratio of the two catalysts and stirring rate on the conversion and enantiomeric purity of the product were investigated. In DKR of $\rho$, $\alpha$-dimethyl benzyl alcohol, the product of 99% ee was obtained with a maximum yield of 88%. The high performance of the catalyst system was maintained in the condition of higher TON and under repeated use.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.296-302
• /
• 2006

The kinetics of the thermal-oxidative decomposition of waste polyurethane (PU) according to oxygen concentration has been studied using a non-isothermal thermogravimetric technique at several heating rates from 10 to $50^{\circ}C/min$. A kinetic model accounting for the effects of the oxygen concentration by the differential and integral method based on Arrhenius equation was proposed to describe the thermal-oxidative decomposition of waste PU. To obtain the information on the kinetic parameters such as activation energy, reaction order, and pre-exponential factor, the thermogravimetric analysis curves and its derivatives have been analyzed using the kinetic analysis method proposed in this work. From this work, it was found that reaction orders for oxygen concentration had a negative sign, and activation energy decreased as the oxygen concentration increased. It was also found that the kinetic parameters obtained from the integral method using the single heating rate experiments varied with heating rates. Therefore, it is thought that the differential method using the multiple heating rate experiments more effectively represents the thermal-oxidative decomposition of waste polyurethane.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.66-71
• /
• 2001

Kinetic parameters for the texture degradation of three varieties of sweet potato during heating were determined using two alternative methods, the biphasic model and the fractional conversion method. The texture degradation of sweet potatoes during heating could be expressed by two simultaneous first order reactions using the biphasic method, whose activation energies were ranged $71.0{\sim}75.1\;kJ/mol\;and\;48.4{\sim}59.6\;kJ/mol$ for the initial fast texture degradation reaction and the slow texture degradation reaction at a prolonged heating period, respectively. However, the whole texture degradation phenomena of sweet potatoes during heating could also be explained by a single first order reaction using the fractional conversion method. The activation energies were $67.5{\sim}75.3\;kJ/mol$, which were comparable with those of the first phase reaction for the texture degradation determined by the biphasic model. A kinetic compensation effect shown between the kinetic parameters determined by both methods indicates that both methods can be conveniently used to determine kinetic parameters for the texture degradation of sweet potatoes by heating.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.204-209
• /
• 2012

In this study, kinetics data was obtained for steam reforming reaction of ethane over the commercial ruthenium catalyst. The variables of ethane steam reforming were the reaction temperature, partial pressure of ethane, and steam/ethane mole ratio. Parameters for the power rate law kinetic model and the Langmuir-Hinshelwood model were obtained from the kinetic data. Also, sizing of steam reforming reactor was performed by using PRO/II simulator. The reactor size calculated by the power rate law kinetic model was bigger than that of using the Langmuir-Hinshelwood model for the same conversion of ethane. Reactor size calculated by the Langmuir-Hinshelwood model seems to be more suitable for the reactor design because the Langmuir-Hinshelwood model was more consistent with the experimental results.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.3
• /
• pp.105-122
• /
• 2016

To evaluate the changes in the physical characteristics of open rainfall related to canopy effects and rainfall intensity in Korea, the terminal velocity of raindrops and drop size distributions(DSD) were continuously measured by an optical-laser disdrometer in an open site(Op) and in two forest stands(Th1: Larix leptolepis, Th2: Pinus koraiensis) during five rainfall events in 2008. The terminal velocity, DSD and two forms of kinetic energy(KE, $Jm^{-2}$ $mm^{-1}$; KER, $Jm^{-2}$ $h^{-1}$) of open rainfall drops were determined and were compared with those of throughfall drops under two different canopy heights. The effects of the canopy and rainfall intensity, together with wind speed, on the changes in drop size and kinetic energy of throughfall were evaluated. Throughfall drops were larger than open rainfall drops. The distribution of terminal velocities for the drop sizes measured at Th2 was lower than that at Op; however, at Th1 the distribution was similar to that at Op. The total kinetic energy of throughfall at Th1 and Th2 was higher than the total kinetic energy of open rainfall, and the kinetic energy distribution for the drop sizes wassimilar to the drop size distribution. The observed throughfall-KER at Th1 was lower than an estimate previously produced using a model. The overestimation from the modeled value at Th1 was likely to be due to overestimated values of a square root transformation of fall height and its coefficient in the model because the distributions of terminal velocity for the drop size measured at Th1 were similar to those of open rainfall.