• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.483-487
• /
• 1996

We consider the estimation of the position and orientation of 6 DOF motion bed (Stewart platform) from the measured cylinder length. The solution of forward kinematics is not solved yet as a useful realtime application tool because of the complity of the equation with multiple solutiple solutions. Hence we suggest an algorithm for the estimation of forward kinematics solution using Luenberger observer withnonlinear error correction term. The Luenberger observer withlinear model shows that the estimation error does not go to zero in steadystate due to the linearization error of the dynamic model. Hence the linear observer is modified using nonlinear measurement error equation and we prove thd practical stability of the estimation error dynamics of the proposed observer using lyapunov function.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.869-874
• /
• 2004

The inverse kinematics of five-axis milling machines produce large errors near stationary points of the required surface. When the tool travels cross or around the point the rotation angles may jump considerably leading to unexpected deviations from the prescribed trajectories. We propose three new algorithms to repair the trajectories by adjusting the rotation angles in such a way that the kinematics error is minimized. Given the tool orientations and the inverse kinematics of the machine, we first eliminate the jumping angles exceeding ${\pi}$ by using the angle adjustment algorithm, leaving the jumps less than ${\pi}$ to be further optimized. Next, we propose to apply an angle switching algorithm to compute the rotations and identify an optimized sequence of rotations by the shortest path scheme. Further error reduction is accomplished by the angle insertion algorithm based an o special interpolation to obtain the required rotations near the singularity. We have verified the algorithms by five-axis milling machines, namely, MAHO600E at the CIM Lab of Asian Institute of Technology and HERMLE UWF902H at the CIM Lab of Kasetsart University.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.28-31
• /
• 1996

We propose an estimator design method of Stewart platform, which gives the 6DOF, positions and velcities of Stewart platform from the measured cylinder length. The solution of forward kinematics is not solved yet as a useful realtime application tool because of the complexity of the equation with multiple solutions. Hence we suggest an nonlinear estimator for the forward kinematics solution using Luenberger observer with nonlinear error correction term. But the way of residual gain selection of the estimator is not clear, so we suggest an algebraic Riccati equation for gain matrix using Lyapunov method. This algorithm gives the sufficient condition of the stability of error dynamics and can be extended to general nonlinear system.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1996년도 추계학술대회 학술발표 논문집
• /
• pp.166-171
• /
• 1996

Generally, when we control the robot, we should calculate exactly Inverse Kinematics. However, Inverse Kinematics calculation is complex and it takes much time for the manipulator to control in real-time. Therefore, the calculation of Inverse Kinematics can result in significant control delay in real time. In this paper, we will present that Inverse Kinematics can be calculated through Fuzzy Logic Mapping, Based on an exact solution through fuzzy reasoning instead of Inverse Kinematics calculation Also, the result provides sufficient precision and transient tracking error can be controlled based on a fuzzy adaptive scheme proposed in this paper. Based on the Denavit-Hartenberg parameters specification, after the Jacobian matrix of arbitrary manipulator is calculated, we will construct Fuzzy Inverse Kinematics Mapping(FIKM) using fuzzy logic and represent a good control efficiency through simulation of 2-DOF manipulator.

• 한국CDE학회지
• /
• 제22권2호
• /
• pp.6-10
• /
• 2016

This paper presents the kinematics of a walking robot leg based on Jansen mechanism. By using simple mathematics, all trajectories of walking robot leg links can be calculated. A foot point trajectory is used to evaluate the performance of a walking robot leg. Trial and Error method is used to find a best combination of link lengths under certain restrictions. All simulations are performed by Matlab. Ground score, drag score, step size, foot lift, instant speed, and average speed of foot point trajectories are used for selecting the best one.

• 생물환경조절학회지
• /
• 제13권1호
• /
• pp.1-7
• /
• 2004

본 연구는 오이수확기의 매니퓰레이터 개발을 위한 기구학적 분석을 하는 것이다. 매니퓰레이터의 정방향 기구학 및 역방향 기구학 분석을 한 후 실제 장치의 반복오차 측정실험을 통해 이론 값을 검증하였다. 매니퓰레이터는 총 세 개의 링크로서 한 개의 수직링크와 두 개의 호전링크로 구성되어져 있으며, 세 개의 스테핑 모터가 각 관절에 장착되어 링크에 동력을 전달한다. 주요 연구결과를 요약하면 다음과 같다. D-H Parameter를 이용하여 정방향 기구학에 의한 매리퓰레이터의 변환 연산자를 얻었다. 역방향 기구학의 해는 두가지로 나타났으며 삼각함수를 이용하여 해를 구하였다. 매리퓰레이터의 반복오차를 측정한 검증 실험에서는 X, Y, Z축에 대하여 반복 오차가 최대 2.60mm, 2.05mm, 1.55mm로 나타났으며, 정방향 및 역방향 기구학에서 오차의 최대지점 및 최소지점의 실제 좌표는 일치하였다. 반복오차 측정 결과는 매리퓰레이터의 목표지점인 오이의 직경에 비해 비교적 작게 나타났다. 측정오차는 실험중 발생한 실험오차로 판단된다. 매니퓰레이터의 오차를 줄이고 작업능률의 향상을 위해서는 링크의 수를 줄이고 오이의 품종 및 재배환경을 고려하여야 하며, 경량이면서도 견고한 재료를 사용하여 하중을 줄여야 한다.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.807-819
• /
• 2019

In this paper, it is proposed a new approach to motion control and kinematics analysis of articulated manipulator attachment with five degree of freedom for excavator. Unlike the well-established theory for the control of linear systems, there is little general control theory relatively for a robust control of nonlinear systems. The control technique is essential for providing a stable and robust performance for application of articulated manipulator control. The proposed control algorithm is one of robust control methods based on error informations of the position and velocity error informations using stability analysis of dynamic model. Through simulation test, the proposed control scheme is illustrated to be a efficient control technique for real-time control.

• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.947-952
• /
• 2021

In this paper, the simplified kinematic error model for Delta parallel robot is presented, which can enable the analytical forward kinematics essentially for kinematic calibration calculations instead of the numerical one. The simplified kinematic error model is proposed and the forward kinematics including the error parameters is analytically derived. The kinematic calibration algorithm of the Delta parallel robot with 90 degree arrangement using laser tracker and the experiment result are presented.

• 한국전문물리치료학회지
• /
• 제20권1호
• /
• pp.10-17
• /
• 2013

The purpose of this study was to assess the influence of the duration of smartphone usage on cervical and lumbar spine flexion angles and reposition error in the cervical spine. The study included 18 healthy smartphone users (7 males and 11 females). We measured the kinematics of the upper and lower cervical and lumbar spine flexion angles and the reposition error of the upper and lower cervical spine after 3 s and 300 s smartphone use in sitting. A paired t-test was used to compare the effects of the duration of smartphone usage on the kinematics of cervical and lumbar spine flexion angles and reposition error. The flexion angles of the lower cervical and lumbar spine and the reposition error in the upper and lower cervical spine were significantly increased after 300 s smartphone of use (p<.05). However, the flexion angle of the upper cervical spine was not significantly different between the 3 s and 300 s smartphone of use (p>.05). These findings suggest that prolonged use of smartphones can induce changes in cervical and lumbar spine posture and proprioception in the cervical spine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.11-12
• /
• 2009