• Journal of the Korean Ceramic Society
• /
• v.19 no.1
• /
• pp.19-23
• /
• 1982

The technique to determine the components in the supersulphated slag cement is discussed by several selective extraction analyses. Accordingly, the rate of hydration reaction of supersulphated slag cement could be quantitatively measured by the following 3 kinds of the selective extraction analyses. (1) Determination of unreacted slag - a salicylic acid, acetone.methanol solution (2) Determination of free $CaSO_4$ - a half saturated lime water (3) Determination of free $Ca(OH)_2$ - glycerine.alcohol solution

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.10a
• /
• pp.183-188
• /
• 1996

The durability of concrete structures decrease due to deterioration of concrete when they are constructed in marine or pollutional environments. In this study, the mortar specimens made from the five different types of cement were immersed in artificial seawater and four kinds chemical solution, and were measured the change of compressive strength and weight. The results show that the longer the immersed days are, the more the compressive strength reduction is. It has been remarked that the resistance of slag cement and ground granulated blast-furnace slag is excellent in chemical attack.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.155-159
• /
• 1982

The author has studied comparatively the sealing quality of conventional Z.O.E. cement, chloropercha and FR cement by means of penetration of 2% methylene blue solution through the apex of human teeth in 112 cases as the time elapsed. The results were as follows; 1. All the specimen, of which dye immersion time is three days, showed dye penetration of low degree unrelated to the kinds of root canal cement and the degree of dye penetration was increased as the time elapsed. 2. Of all the experimental group, the Z.O.E. cement group showed the lowest degree of dye penetration and the FR filling group showed the highest degree of dye penetration. 3. The degree of dye penetration of FR cement group was higher than that of the Z.O.E. cement group but lower than that of the chloropercha group.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.1
• /
• pp.9-19
• /
• 1998

A laboratory study was conducted to investigate the immobilization of the laboratory waste sludge, mainly from chemical oxygen demand (COD) waste, using cementitious binders. The binders were: Ordinary Portland Cement (OPC), and lime-Rice Husk Ash(RHA) cement. The economic evaluation was done for three different kinds of cementitious binders, namely, OPC, Portalnd Rice Husk Ash Cement (PRHAC) which contained rice husk ash 50 percent by dry weight, and lime-RHA cement. The result showed that lime-RHA cement was the cheapest. The applicability of Freundlich's desorption isotherm was studied to assess the teachability of sludges. The teachability of cement mortars was found to follow the desorption isotherms. Therefore, it was concluded that based on this test, the leachate concentrations of the solidified heavy metals could be predicted, approximately by the Freundlich's isotherm desorption modeling.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.9.2-19
• /
• 1993

A laboratory study was conducted to investigate the immobilization of the laboratory waste sludge, mainly from chemical oxygen demand (COD) waste, using cementitious binders. The binders were: Ordinary Portland Cement (OPC), and lime-Rice Husk Ash (RHA) cement. The economic evaluation was done for three different kinds of cementitious binders, namely, OPC, Portaind Rice Husk Ash Cement (PRHAC) which contained rice husk ash U percent by dry weight, and lime-RHA cement. The result showed that lime-RHA cement was the cheapest. The applicability of Freundlich's desorption isotherm was studied to assess the teachability of sludges. The teachability of cement mortars was found to follow the desorption isotherms. Therefore, it was concluded that based on this test, the leachate concentrations of the solidified heavy metals could be predicted, approximately by the Freundlich's isotherm desorption modeling.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.65-70
• /
• 1994

The aim of this study is to develop the High Workable Concrete which has not so large slump loss with time using blast-furnace cement and High range water reducing agent. Normal portland cement and blast-furnce cement was used as binders and water-binder ratio were ranging from 34% to 50%. 5 kinds of Superplasticizer and High range water reducing agent were used. Test results show that the blast-furmace cement was much higher flowability than normal portland cement and domestic High rang water reducing and AE agent had very small slump loss than others. The compactability of High Workable Concrete was also confirmed using model wall-form.

• Korean Journal of Materials Research
• /
• v.32 no.1
• /
• pp.23-29
• /
• 2022

Fly ash is a by-product of coal fired electrical power plants and used as a material for cement and concrete; particularly, imported fly ash is mainly applied for cement production. Main objectives of this article are to replace domestic fly ash with an imported source. To verify the possibility of domestic fly ash as a material for cement from the aspect of chemical composition and physical properties, we manufactured various kinds of cement, such as using only natural raw material, shale, and partial replacement with domestic and imported fly ash. When we used the domestic and imported fly ash, there were no specific problems in terms of clinker synthesis or cement manufacturing in relation to the natural material, shale. In conclusion, domestic fly ash has been confirmed as an alternative raw material for cement because 7 days and 28 days compressive strength values were better than those of reference cement using natural raw material, on top of the process issue.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.36-41
• /
• 1996

The selection of Cement types is greatly dependent on the structural requirement and consturction location associated with control of hydration heat, acquisition of early strength, existence of sulfate attacks and so on. Based on this, this study adresses the comparison of physical properties of concrete according to the use of different cement types. As a result of testing with OPC, blast furnace slag and low heat cement, it is found that concrete made with low heat cement is much better in term of hydration heat and permeability. It is also recommended to select a preper cement type depending on structural characteristics.

• Smart Structures and Systems
• /
• v.14 no.3
• /
• pp.267-284
• /
• 2014

This paper aims to present the analytical solutions of 2-2 cement based piezoelectric transducers in series electrically based on the theory of piezo-elastic dynamics. The solutions of two different kinds of 2-2 cement based piezoelectric transducers under external harmonic load are obtained by using the displacement method. The effects of electrical connection of piezoelectric layers, loading frequency, thickness and distance of piezoelectric layers on the characteristics of the transducers are discussed. Comparisons with other related experimental investigations are also given, and good agreement is found. The proposed 2-2 cement based piezoelectric transducers have a great potential application in monitoring structural health in civil engineering and capturing mechanical energy or monitoring train-running safety in railway system and traffic safety in road system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.57-61
• /
• 2005

Cement paste is originally the basic material and crucial factor consisting concrete. This study investigates the relationship between flow apparatuses, which are ring flow(R-F), flow cone(F-C) and mini slump(M-S), in order to estimate the fluidity of cement Paste. For quantitatively evaluating the measured data this study also investigated the calibration of the rheology consistent, such as yield value and plastic viscosity, of cement paste using viscometer For this purpose the present work discussed the influence of 3 type of ordinary portland cement with different companies, affecting the fluidity of cement paste. and it also demonstrated the influence of the various kinds of mineral admixtures, such as fly ash(FA), blast furnace slag(BS) and silica fume(SF) and that of incorporating ratio. The author concluded that using R-F apparatus is the most effective flow test method of cement paste and it is exactly proportional to other apparatus' rheological properties.