• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.195-203
• /
• 2016

Heavy metals have been analyzed on the non-woven from the 24 kinds of wet wipes and 8 kinds of mask packs. The following materials used in the non-woven according to each product are: rayon+polyester for the 12 wet wipe products, rayon+PET for the 5 wet wipe products, and rayon, cotton, rayon+polyester+cotton, pulp+polypropylene for the rest of the wet wipe products. No further information on the materials was found on the 3 wet wipes and 8 mask packs. However, polyester may be applied for the non-woven in wet wipes, because PET is part of the polyester group. The heavy metals analysis in the 24 kinds of wet wipes and 8 kinds of mask packs revealed the following: arsenic was found from $47.14{\pm}1.13$ to $71.75{\pm}1.64{\mu}g/L$ on the 3 products, the amount of nickel in the 2 products were $261.26{\pm}5.14$ and $1,242.63{\pm}43.71{\mu}g/L$, $53.69{\pm}1.45$ and $103.52{\pm}2.02mg/L$ on the 2 mask packs. It was also revealed that lead was detected from $7.23{\pm}0.32$ to $55.67{\pm}1.46{\mu}g/L$ on the 6 wet wipes, antimony was ranged from $187.86{\pm}5.24$ to $19,558.35{\pm}3,537.30{\mu}g/L$ on the 12 wet wipes, and $5.25{\pm}0.25$ and $8,936{\pm}55.22{\mu}g/L$ on the 2 mask packs. No cadmium, mercury, or thallium were detected from all the products. A high concentration of antimony might come from antimony trioxide, which was used as a catalyst when manufacturing the polyester. Therefore, it is strongly recommended that a non-woven used for cosmetic purposes should not use heavy metals as a catalyst when manufacturing, and it's important to clarify which materials are used in non-woven.

• 대한치과교정학회지
• /
• 제15권2호
• /
• pp.211-227
• /
• 1985

The purpose of this study was to analyze the stress distribution and the displacement in the maxillary complex after the application of the three kinds of the head gear. (high pull head gear, straight pull head gear, cervical pull head gear.) Orthopedic force, 300 gram, was applied to the maxilla of the dry human skull in a high, straight and cervical direction. The stress distribution and the displacement within the maxillary complex was analyzed by a 3-dimensional finite element method. The results were as follow: 1. In won, the stress of conical pull head gear was the greatest stress and straight pull head gear was the medium stress and high pull head gear was the least stress. 2. The compressive stress was observed on the anterior portion of premaxilla, especially anterior nasal spine area, when the three kinds of head gear were applied to the dry kuman skull. 3. It appeared that the stress of the anterior portion of the zygomatic bone was greater than the posterior portion in the case of three kinds of head gear application and compressive stress was noted only at the below of the frontozygomatic suture of the zygomatic bone. 4. The backward, upward, sideward displacement of the alveolar area was observed in a high pull head gear application but in the case of straight pull head gear and cervical pull head gear application, the backward, downward, sideward displacement was observed. 5. The forward, downward, sideward displacement was observed on the midpalatine suture and premaxilla on the sagittal plane and transverse palatine suture in the case of three kinds of headgear application.

• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.91-109
• /
• 1991

The purpose of this study were to comfirm the effects of the thickness and kinds of porcelain, etchants, illumination time, elapsed time for the measurement, and chemical cure component to the bond strength of porcelain laminate and composite resin cement, and to compare the effects between the light cured resin and the dual cured resins. The etched porcelain surface, the sectioned surface crossing porcelain and resin after bonding, and the debonded surfaces were observed by the SEM. One product of laminate porcelain powder, one light cured resin and two dual cured resins were selected. Each resin cements are lightened through the thin porcelain disc which was cut from cylindrical porcelain specimen by the diamond saw, and by the light through the porcelain disc they were bonded. Changes of thickness and kinds of porcelain, etchants, illumination time, and the elapsed time for the measurement were considered as variables for the bond strength. And the bond strength of porcelain and dual cured resins under the conditions of autopolymerization or the removal of chemical cure component were measured and compared. Bond strength were measured by shear stress. The etched surface, the cross-sectioned surface, and the debonded surface of porcelain or resin were observed by SEM. On the summary of this study, the following conclusions can be stated; 1. Bond strength of light cured resin was decreased inversely by the thickened porcelain laminate and showed the lowest value to the masking dentin porcelain among 4 kinds of porcelain powder. 2. Bond strength of autopolymerization of dual cured resin without illumination in dark chamber were from 75% to 98% to the data of dual cured resin with illumination. 3. Bond strength of dual cured resin used without chemical cured components were same to them of light cured resin. 4. Cross-sectioned surface treated by silane did not show the gap between the porcelain and resin. 5. Illumination over 80 seconds did not make the significant increase of bond strength on all kinds of resin.

• 한국조경학회지
• /
• 제26권4호
• /
• pp.36-58
• /
• 1999

We designed the model picture of Tourism Botanical Garden, as a kind of theme park, in which we could enjoy flowers all the year round and the glorious tints of its autumn foliage. It would be very important to decide what kinds of trees should be planted and where to plant them. We selected the appropriate flowers and trees according to their value of appreciation and flowering time and the grand view around there and the weather conditions of the central region. We selected perennial plants as native plants, according to their color, flowering time and for the convenience of maintenance. And we selected some kinds of culture plants to show the seasonal change and diversity, according to their color and flowering time. We adopted the roof-tile pattern of Pakjae Kingdom to design the basic model of the garden, and the area was divided into eight sections. Six of them were divided again into four small planting areas from the outside respectively, according to the kinds of trees; pine-tree area, native flowering plant area, flowering tree area and flowering shrub area. The last two sections are by a lake, so they could make a beautiful landscape of waterfront. For the effective and economic operation of the garden, some kinds of flower trees and shrubs, which are little damaged by blight and are needless to prune, were selected. And perennial plants were also selected, because we don't have to change them into other plants, so we could cut down the expenses. As for the culture plants, they could be easily replaced with other culture plants in the flowering time, to show seasonal change and the harmony with the scenery around the garden.

• 한국응용곤충학회지
• /
• 제36권2호
• /
• pp.156-165
• /
• 1997

다식성 산림해충인 주동무늬차색풍뎅이(Adoretus tenuimaculatus Waterhouse)의 기주식물과 기주선호도를 조사한 결과, 야외조사에서는 25과 66종류의 식물을 가해하는 것으로 밝혀졌고, 먹이공급 실험을 통하여는 5과 14종의 식물을 식해하는 것으로 나타나 문헌상에 있는 32과 136종류의 기주식물을 합하면 주둥무늬차색풍뎅이의 기주식물은 총 42과 186종류가 되었다. 이들 중 새로 밝혀진 기주식물은 19과 50종이었다. 한편, 15과 39종의 식물을 대상으로 기주선호도를 조사한 결과, 가장 많이 유인된 것은 호두나무(Juglans sinensis)였으며, 가장 많이 식해한 식물은 밤나무(Castanea crenata)였다. 유인율과 피해도가 높은 수종들은 밤나무, 아까시나무(Robinia pseudoacasia), 아그배나무(Malus sieboldii), 호두나무, 신갈나무(Quercus mongolica), 갈참나무(Q. aliena)였다. 그러나 고욤나무(Diospyros lotus), 혹호도(Juglans nigra), 들메나무(Fraxinus mandshurica), 물푸레나무(F. rhynchophylla), 파란칸타(Pyracantha angustifolia), 오동나무(Paulownia Coreana), 팽나무(Celtis sinensis)등에는 전혀 유인되지 않았다. 동일 종류의 식물일지라도 지역에 따라 주둥무늬차색풍뎅이가 가해하였던 것과 가해하지 않았던 경우가 있었으며, 피해 정도도 지역과 시기에 따라 차이가 있었다.

• 한국지역사회생활과학회지
• /
• 제16권1호
• /
• pp.21-36
• /
• 2005

New occupational types, suitable for the elderly, have been developed in order to extend job opportunities for that demographic. However, it was mainly done from the perspective of the urban elderly and did not take into account the rural elderly's needs and the special conditions in rural areas. Especially, as 53.4% of the rural elderly 60 years old and over has engaged in economic activities and 88.7% of them are working in the field of agriculture or forestry, the development on the new kinds of job for the rural elderly is more meaningful as secondary jobs rather than as new occupations. Therefore, this study aimed at developing the new kinds of occupation suitable for the rural elderly. For this purpose, data were collected from 279 elderly farmers 60 years old and over working currently or have ever worked in something other than farming work. Questionnaires were composed to measure preferences for jobs by work characteristics and evaluations on the appropriateness of the jobs for the elderly selected by the Ministry of Labor in Korea. The results showed that the rural elderly preferred work doing at home, together with the elderly, in groups, and light physical labor to technical or office work that must commute regularly. Also, they evaluated that most of the occupations suitable for the elderly announced by the Ministry of Labor were more suitable for the male than the female elderly. Based on these findings, this study selected 18 kinds of individual and 11 common jobs by sex. It may contribute to creating job opportunities for the rural elderly by applying it to the policy or extension, and to revitalizing the rural elderly's lives and increasing their incomes.

• 농업과학연구
• /
• 제23권2호
• /
• pp.182-187
• /
• 1996

충남대학교 충주 연습림에 자생하고 있는 식생 및 부속시설물에 식재된 수종과 인근에서 쉽게 찾아볼 수 있는 초본 및 목본류를 대상으로 각 종을 분류, 조사하여 연습림의 식생에 대한 정보를 수집하였다. 조사결과 파악된 식물종은 60과, 113속, 123종, 12변종, 총 135종류가 서식하고 있었으며, 초본은 49종류, 목본은 86종류, 상록수종은 7종류로 나타났다. 본 연습림의 식물종을 보전함은 물론 더욱 다양한 식물종이 서식하는 건전한 산림을 육성토록 노력해야 할 것이다.

• 한국문헌정보학회지
• /
• 제40권4호
• /
• pp.245-266
• /
• 2006

이 연구는 조선시대 경기도(京畿道) 양주지역(楊州地域)에서 간행된 불서의 현존하는 판본을 조사, 분석하여 특징을 밝히는 데 목적이 있다. 고서소장목록과 목판을 조사결과 총 99종의 불서가 14개 사찰에서 간행되었던 것으로 나타났다. 분석결과 시기적으로 조선후기 간행이 활발하였으며 불암사본이 53종으로 가장 많았으며, 간행불서의 성격은 위경, 밀교, 반야계통의 경전이 주류를 이루었고, 판종별로는 목판본이 85종, 목활자본이 14종으로 파악되었다.

• 정보처리학회논문지C
• /
• 제16C권2호
• /
• pp.275-284
• /
• 2009

네트워크기술의 빠른 발전과 다양한 정보들의 디지털화는 정보 간의 융합을 가속시키고 있다. 따라서 사용자에게 음성, 영상, 텍스트 등 다양한 정보가 통신망, 방송망 등으로 구분되어 있는 네트워크 다양한 디바이스에 상관없이 제공될 수 있는 서비스 컨버전스 환경이 요구된다. 일반적으로 Enabler는 BcN의 IMS에 적용되어 응용서비스 계층으로부터 미디어, 통신 등 다양한 서비스를 네트워크에 상관없이 통합 제공해 주기 위한 기능을 포함하며 응용 서비스에 필요한 다양한 기능을 담당한다. 하지만 통합서비스 제공을 받기 위해서는 네트워크나 디바이스 등에 대한 프로파일을 통해 사용자의 환경에 대한 상황을 추론하여 적합한 서비스 방식을 결정, 제공해야한다. 본 논문에서는 IMS Enabler를 통한 통합 서비스 제공환경에서 프로파일(profile)에 따라 서비스 제공 방식을 도출해 내는 상황인지 모듈의 구조 및 기능을 제안한다.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.487-507
• /
• 1995

Composite resin repair requires strong bond strength between the new and old materials. The objective of the current study was to identify the optimal treatments for sufficient bond strengths. Bondings between same kinds of materials and cross bondings using chemical curing composites and light curing composites were tested. Surface treatments included the methods of sand-blasting, acid etching and coating of bonding agent. Seven kinds cases of combinations from three kinds of methods were experimented and compared with a control group of which surfaces were highly polished. Measurements of shear bond strength and observations of surface morphologic changes using a scanning electron microscope were done. Following conclusions were drawn : 1. The highest bond strength among composite resins were exhibited by the treatment of the sand-blasting and the coating of bonding agent. 2. Acid etched surfaces showed the lowest bond strength. Bond strengths obtained from experimental groups including acid etching were lower than those obtained from same kinds of experimental groups without acid etching. 3. Simple method of the coating of bonding agent produced the slightly increased bond strength on chemical curing composite and reduced bond strength on light curing composite. 4. Bonding surfaces of chemical curing composite resin showed slightly higher bond strengths than light curing composite resin, however significant differences were not confirmed statistically. 5. More significant irregular surfaces were created by sand-blasting method than acid etching method. 6. A principal component of fillers of both resins was silicon. Acid etching method produced the seperations and degradations of fillers, these were significant on light curing composite resins which containing barium fillers.