• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.15-21
• /
• 2003

Image processing technique was adapted for exploring the more convenient ways to investigate the drying characteristics of wood. The acquisition of information about drying characteristics is indispensable for the development or improvement of dry-kiln schedules. A small internal fan type wood dry kiln was combined with image-processing and data-acquisition systems to monitor continuously the formation of checks and moisture reduction during drying. All the images and data were analyzed to improve or estimate the dry-kiln schedules and predict the drying time which would be required to dry green wood to 10% moisture content in internal fan type kiln. Samples of 20 mm- and 50 mm-thick Metasequoia glyptostrobodies, Paulownia coreana Uyeki, Pinus densiflora Sieb. Et Zucc., Platanus occidentalis L., Quercus acutissima and Robinia pseudo-acacia were used to verify the potentiality of this technique.

• Journal of the Korean Wood Science and Technology
• /
• v.3 no.1
• /
• pp.48-49
• /
• 1975

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.3
• /
• pp.125-130
• /
• 2008

If the properties of artificial lightweight aggregates produced by rotary kiln can be predicted by using a simulator equipped with a small electric furnace and a specially designed device for specimen movement, large amount of raw materials and plenty of test time can be saved to produce test products of lightweight aggregates. In this study a simulator for the accurate prediction of the artificial lightweight aggregates produced by rotary kiln was assembled by our own design and the properties of lightweight aggregates produced by both the simulator and rotary kiln were compared to speculate its usefulness. The average diameter of aggregates was 8 mm and atmosphere in the furnace was controlled by the amount of carbon powders. Specific gravity, absorption rate (%), black-core area in the cross-sectional view of both aggregates were measured and compared. Unlike oxydizing atmosphere, both specific gravity and absorption rate of the aggregates sintered at reducing atmosphere were increased with increasing carbon addition. It is concluded that the sintering atmosphere was the closest to that of the rotary kiln when the carbon addition was 0.7 g to make a reducing atmosphere in the furnace and the properties of both agreggates was also similar to each other.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.251-259
• /
• 1999

A computer simulation was conducted for heat and momentum transfer in a roller kiln. Time-averaged Navier-Stokes equation conjugated with energy balance equation was numerically solved to predict the temperature distribution and fluid flow field in the roller kiln. A computer simulation was performed for a roller kiln for three cases. Firstly, when there are no ceramic materials in the roller kiln, the effect of natural convection was studied on the temperature distribution and fluid flow field. From the result, it was observed that air takes the heat of wall away from the roller kiln by natural convection and the heat was not transferred effectively. Secondly, with ceramic materials temperature difference of ceramic material from the borrom to the top of a ceramic material was about 255K in 5th zone and this is because the heat is transferred from the surface of a ceramic material to flowing air with relatively low temperature. Finally, we considered effect of radiation heat transfer. Temperature difference of ceramic material in 5th zone was about 300 K, due to radiation heat transfer on the ceramic material surfaces.

• Resources Recycling
• /
• v.4 no.4
• /
• pp.37-58
• /
• 1995

Whole tues were put uto cement kiln inlet where the tempmalures or gas and cemcnt-raw-materials were 1050 and 800- 850.C. respcclrvely. Tl~ck iln consisls of \ulcorner-stage suspension preheatel- and air quenching coolers The amount of wusle tlrcs added in lhc normal encrgy in lhc ce~ncnlk iln was 3, 5, 7% by volume Welght and steel contents of tiles. ulti~~iaalcn d elemental analysis, ash contents. ash hsion temperature. etc, wete detcnutned to inveshgate thc prnpcrlics a1 tires and ilreir ashes. Flucluat~ons of cement kiln placess, cement quality and an pollulton were invesligalerl during lhc burning tins. When the Ieeding ralio ol wasle lires to normal cncrgy was 50'0, there was nn wlde d~ffereilces m the cemmt quctlity and air pollutcon between operation with tiles and withoul tires. Tl~ch cal iccovcry was uhout 50% w~th5 % add~tionI n the nonndl energy. There was a little lxt fluctuation of cement quultty ncld an pollution at olher feeding ralios.

• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.181-192
• /
• 2015

This study aims to examine production technique of twelve white wares from the Gangneung Namyang-ri and Donghae Balhan-dong2(Samun-dong) kiln sites, Kangwon Province and characteristics of the used materials, and to find a correlation among materials of the excavated white wares. X-ray fluorescence sequential spectroscopy(XRF), X-ray diffraction(XRD), Dilatometer and Inductively coupled plasma mass spectrometry(ICP-MS), Inductively coupled plasma automic emission spectrometer(ICP-AES) were applied to determine the chemical composition, crystalline phase of samples, firing temperatures, trace elements and rare earth elements. When analyzing body crystalline phases of the white wares using the XRD method, quartz and mullite were extracted from all the samples. Though firing temperature of each sample was different, they were mostly fired at a temperature below $1200^{\circ}C$. Analyzing the excavated white wares using the Seger formula, compositional properties of white wares in Gangneung Namyang-ri kiln showed diffrently from the Donghae Balhan-dong2(Samun-dong) kiln. The body of white wares from Gangneung Namyang-ri kiln have higher raito of $RO_2$ and $RO+R_2O$ than of white wares from Donghae Balhan-dong2(Samun-dong) kiln site. The white wares from Gangneung Namyang-ri kiln and Donghae Balhan-dong2(Samun-dong) kiln were made of host rocks of the different geological origin, according to the result of rare earth elements analysis.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.291-300
• /
• 2011

Archaeomagnetic dating method is used to assign a date to the archaeological remains in which burnt soil is found by measuring the changes in terrestrial magnetism with the thermal remanent magnetization retained in burnt soil. This method, in particular, is quite useful to determine an age of the archaeological remains in which no properties are found, which makes it difficult to assigning a date. Hemp kiln and lime kiln fall under remains of these features, and 21 and 5 archaeomagnetic data from both kilns respectively were obtained by measuring the- remanent magnetization in burnt soil samples that are extracted in hemp kilns and lime kilns in the country. The results of archaeomagnetic dating with these data show the age range of the hemp kilns is between the late 10th century A.D. and the middle of the 19th century, and that of the lime kilns is between the early 16th century A.D. and the middle of the 18th century. The factor that the number of data collected from the hemp kilns was comparatively more than those from the lime kilns might affect the result, however corresponding to the fact that hemp had been used for a long period of time, the period of hemp kiln are widely spread over the chronological table. And the archaeomagnetic dating of lime kiln, in view of archaeological periods, is not only in accord with the late Joseon period when the tombs with lime-soil mixture barrier in trend; this is also telling that its width of archaeological period is comparatively narrow.

• Journal of Korea Foresty Energy
• /
• v.22 no.1
• /
• pp.17-23
• /
• 2003

Three different aged Chinese bamboo (Phyllostachys pubescense; 3, 5, and 7 years) was carbonized using three different types of kilns (special, improved and simple kiln) and their physicochemical charcoal properties were investigated. The fixed carbon of the bamboo charcoal prepared from the special kiln (800 - $1,000^{\circ}C$) tended to be decreased, while the specific surface area tended to be increased, according to the increase of bamboo ages. The bamboo charcoal prepared from the 5-year-aged showed the highest value in iodine value. In the improved kiln (600 - $700^{\circ}C$), the specific surface area and the iodine value increased with the growth period. In the simple kiln (400 - $500^{\circ}C$), the amount of volatile matter of the bamboo charcoal was approximately two times higher than that obtained from the special and improved kilns. Despite of the high amount of volatile matter in the simple kiln, the fixed carbon was more than 80%. The 5-year-aged bamboo charcoal showed the highest levels in specific surface area and iodine value. The physical properties of the bamboo charcoals prepared from the 3- and 5-year-aged Chinese bamboo were relatively worse those of Korean bamboo of the same ages. It was probably thought caused by less dense structure of the Chinese bamboo of 3- and 5-year-aged than the domestic in morphological aspects.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.87-95
• /
• 2002

Three different species of green and air-dried Korean bamboos were carbonized by using three different types of kilns designated as special (800~1000℃), improved (600~700℃) and simple kiln (400~500℃), and the bamboo vinegars obtained from the carbonization processes were characterized. In the case of the special kiln, most of the bamboo vinegars obtained at the first recovery stage showed high values of specific gravity and also in content of organic acid and water-soluble tar. The bamboo vinegars obtained from the improved kiln showed various physical properties depending on their species. In the case of simple kiln, the bamboo vinegars obtained from air-dried bamboos and at temperatures below 80℃, showed a higher specific gravity and more water-soluble tar as well as total organic components than those obtained at 80~150℃. A good linear relationship (correlation coefficient of ca. 0.90) was obtained between the specific gravities and the sum of organic acids and water-soluble tars. Therefore, this correlation coefficient might be a good index to determine the quality of bamboo vinegars. The major chemical constituents of the bamboo vinegars were acetic acid and considerable amounts of phenols: guaiacol, ethyl guaiacol, syringol, and methyl syringol.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.69-78
• /
• 1988

For the modification of kiln drying schedule, rela ons between drying resistance R and moisture content or drying times were found 2.5cm-and 5.0cm-thick pitch pine (Pinus rigida Mill.) board and dimension lumber by the conventional kiln drying schedule until the average moisture content was 10%. The results of this study were as follows. 1. Drying resistance increased curvilinearly as moisture content decreased, and was higher for dimension lumber than for board at a given moisture content. The relationships between drying resistance and moisture content for the conventional kiln drying schedule and thickness of lumber were 1) $R_{2.5}=6.795\times10^3M^{-1.27^{**}}$ for 2.5cm-thick board by the conventional kiln drying schedule. 3) $R_{5.0}=5.206\times10^4M^{-1.55^{**}}$ for 5.0cm-thick dimension lumber by the conventional kiln drying schedule. 2. As drying time increased, moisture content decreased and drying resistance increased at the same time. Gradient of slope for dimension lumber was gentler than board. 3. The predicted drying times to 10% moisture content with the conventional kiln drying schedule were a little shorter than actual drying times with relatively small error. 4. It is necessary for the conventional kiln drying schedule to be modified to provide the desired final moisture content at minimum drying time with no significant degrade under severe drying conditions. 5. The kiln factors for 2.5cm-thick board and 5.0cm-thick dimension lumber with the conventional kiln drying schedule were 1.112, 1.136, respectively.