• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.453-463
• /
• 2017

This paper discusses the measurement of frequency response functions for various dc-dc converters. The frequency domain identification procedure is applied to the measured frequency responses. The identified transfer functions are primarily used in developing behavioral models for dc-dc converters. Distributed power systems are based upon such converters in cascade, parallel and several other configurations. The system level analysis of a complete system becomes complex when the identified transfer functions are of high order. Therefore, a certain technique needs to be applied for order reduction of the identified transfer functions. During the process of order reduction, it has to be ensured that the system retains the dynamics of the full order system. The technique used here is based on the Hankel singular values of a system. A systematic procedure is given to retain the maximum energy states for the reduced order model. A dynamic analysis is performed for behavioral models based on full and reduced order frequency responses. The close agreement of results validates the effectiveness of the model order reduction. Stability is the key design objective for any system designer. Therefore, the measured frequency responses at the interface of the source and load are also used to predict stability of the system.

• 정보처리학회논문지D
• /
• 제17D권5호
• /
• pp.347-352
• /
• 2010

자동화된 서비스 식별 및 품질평가는 서비스 지향 컴퓨팅의 주요한 특징 중의 하나이며, 특히 최근 몇 년간 이에 관한 활발한 연구가 진행되고 있다. 그러나 대부분의 연구는 어플리케이션 서비스 식별 및 품질평가에 집중되어 있으며, 비즈니스 프로세스로부터 비즈니스 서비스를 식별하고 품질평가를 자동화하는 방안은 제시하지 못하고 있다. 일반적으로 비즈니스 서비스 식별은 전문가에 의해 수작업으로 이루지기 때문에 많은 비용과 모호성을 유발할 수 있을 뿐만 아니라 작업 실수 및 오해로 인해 낮은 품질의 서비스 설계로 이어질 수 있다. 본 연구에서는 전사적 아키텍처를 기계가 이해할 수 있는 지식데이터베이스로 활용한 비즈니스 서비스 식별과 품질평가의 자동화 방안을 제안한다. 제안 방안의 효용성을 보이기 위해 미국 국방부의 전사적 아키텍처를 활용한 실험결과를 제시한다.

• 한국항공운항학회지
• /
• 제20권3호
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• Smart Structures and Systems
• /
• 제15권6호
• /
• pp.1463-1479
• /
• 2015

Lamb waves have been a promising candidate for quantitative damage identification for various engineering structures, taking advantage of their superb capabilities of traveling for long distances with fast propagation and low attenuation. However, the application of Lamb waves in damage identification so far has been hampered by the fact that the characteristic signals associated with defects are generally weaker compared with those arising from boundary reflections, mode conversions and environmental noises, making it a tough task to achieve satisfactory damage identification from the time series. With awareness of this challenge, this paper proposes a time reversal-based technique to enhance the strength of damage-scattered signals, which has been previously applied to bulk wave-based damage detection successfully. The investigation includes (i) an analysis of Lamb wave propagation in a plate, generated by PZT patches mounted on the structure; (ii) an introduction of the time reversal theory dedicated for waveform reconstruction with a narrow-band input; (iii) a process of enhancing damage-scattered signals based on time reversal focalization; and (iv) the experimental investigation of the proposed approach to enhance the damage identification on a composite plate. The results have demonstrated that signals scattered by delamination in the composite plate can be enhanced remarkably with the assistance of the proposed process, benefiting from which the damage in the plate is identified with ease and high precision.

• 한국컴퓨터정보학회논문지
• /
• 제24권10호
• /
• pp.65-70
• /
• 2019

최근 선박자동식별장치의 도입으로, 육상에서 선박위치, 침로, 속력, 선박종류 등 선박 항적데이터 수집이 가능해 졌다. 본 연구는 맵리듀스 알고리즘을 분산처리 환경에 적용하여 선박 항적데이터를 효율적으로 처리하는 방법을 제안한다. 제안하는 방법은 데이터 전처리 단계, 맵핑 단계, 리듀싱 단계로 나뉘어져 있다. 데이터 전처리 단계는 선박의 동적 및 정적 데이터를 통합하고, 비관심지역의 선박정보는 필터링한다. 맵핑 단계는 선박 위치를 지오해시 코드로 변환하여 맵리듀스의 키 데이터로 할당하고, 선박의 ID는 값 데이터로 분리한다. 리듀싱 단계에서는 키 데이터가 같은 키-값 쌍 데이터를 추출하여 해당 그리드에서 선박의 수를 계산하여 시각화 한다. 제안한 방법은 항적데이터 분석에 있어서 기존 프로그램 성능에 비해 1~4배 성능 개선이 되었다.

• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.11-16
• /
• 1996

This paper proposes a deadzone estimator for robust system identification. In order to cope with the drift phenomena occurred in where system inputs are not sufficiently excited in adaptive control, we introduce a novel and flexible bound condition against a fixed constant. It is derived from a forgetting factor and a rational value of the traces of the covariance matrices between step k and k-1. The key feature of this is that it does not require a priori for the bound. Also, the calculation of it is more simple than the one of literatures. The simulation results are examined for showing the practical performance of this algorithm.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2003년도 제2차 연례학술대회 발표논문집
• /
• pp.229-235
• /
• 2003

Research of basis technology to construct the human haplotype map is one of active areas in SNP post-genomics research. Identification of haplotype block structure from haplotype data is key step in the haplotype map project. Several algorithms have been proposed for the block identification, including the greedy algorithm, and the dynamic programming based algorithm. This paper analyzed block partitioning method of several algorithm which has been proposed in recent years. HapBlock and HaploBlockFinder are programs used in our experiment.

• 미생물학회지
• /
• 제11권2호
• /
• pp.63-68
• /
• 1973

Thirtythree strains of the Aspergillus spp. isolated from foodstuffs were observed through some physiological characteristics for detection of identification key of Aspergillus spp. 1) Each strain of Aspergillus spp. had their specific characteristics and could be used for identification of species. 2) Excellent amylase-producing fungi were observed among the isolated strains of Aspergillus spp. 3) Amylase activities increased for one week incubation period. 4) In the tests of common characters of aflatoxin-producing fungi among the 33 strains of Aspergillus spp., for example, conidial size, presence of sclerotia, kojic acid, and pigment production, coloration of phenol, reduction of methylene blue, etc.

• 미생물과산업
• /
• 제26권1호
• /
• pp.8-17
• /
• 2000

Aspergillus을 이용하여 생리적 제 성질을 조사하였던 바 다음과 같은 결론을 얻었다. 1)각 균주들은 각각 그들의 특성을 가지고 있었으며 이로서 균동정의 가능성을 나타내었다. 2)Amylase측정결과에서 보면 비교적 역가가 높은 균주들이 관찰되었으며, 이는 일주간의 배양시간의 경과에 따라 역가가 증가하였으나 protease의 역가는 우수한 균주를 발견키가 어려웠다. Iodine의 착색대와 비착색대의 비율에 의한 역가의 정성적인 측정이 가능하였다.

• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.715-730
• /
• 2023

Broad studies have addressed the issue of structural element damage identification, however, rubber bearing, as a key component of load transmission between the superstructure and substructure, is essential to the operational safety of a bridge, which should be paid more attention to its health condition. However, regarding the limitations of the traditional bearing damage detection methods as well as few studies have been conducted on this topic, in this paper, inspired by the model updating-based structural damage identification, a two-stage bearing damage identification method has been proposed. In the first stage, we deduce a novel bearing damage localization indicator, called element relative MSE, to accurately determine the bearing damage location. In the second one, the prior knowledge of bearing damage localization is combined with sailfish optimization (SFO) to perform the bearing damage estimation. In order to validate the feasibility, a numerical example of a 5-span continuous beam is introduced, also the noise robustness has been investigated. Meanwhile, the effectiveness and engineering applicability are further verified based on an experimental simply supported beam and actual engineering of the I-40 Bridge. The obtained results are good, which indicate that the proposed method is not only suitable for simple structures but also can accurately locate the bearing damage site and identify its severity for complex structure. To summarize, the proposed method provides a good guideline for the issue of bridge bearing detection, which could be used to reduce the difficulty of the traditional bearing failure detection approach, further saving labor costs and economic expenses.