• 환경위생공학
• /
• 제15권4호
• /
• pp.123-133
• /
• 2000

The kinetic analysis was carried out for commercial rubbers such as NR, IR, BR, SBR 1500, and SBR 1700. Kinetic analysis for the commercial rubbers was performed using the thermogravimetric method, with which the activation energies of NR obtained by Kissinger, Friedman, and Ozawa's method were 195.0, 198.3 and 186.3kJ/mol, whereas that of SBR 1500 were 246.4, 247.5 and 254.8kJ/mol, respectively. It was shown that the yield of pyrolytic oil was generally increased with final temperature increasing, yet slightly decreased or increased over $700^{\circ}C$. Considering the effect of heating rate, it was found that the yield of pyrolytic oil was not consistent for each sample. The number average molecular weight of SBR 1500 was in the range of 740~2486. The calorific value of SBR 1500 was 39~40kJ/g, which were made comparative study of the conventional fuel such as kerosene, diesel, light fuel, and heavy fuel. Therefore it was essential that the selection of the suitable kinetic model and the mathematical solution because of the difference in parameters obtained from each method. It was proposed that the range of $600~700^{\circ}C$ in final temperature and high heating rate due to short run time. It was suggested that the pyrolytic oil be available to use to the fuel.

• 한국환경과학회지
• /
• 제19권1호
• /
• pp.97-103
• /
• 2010

The biodegradable oil absorption resin was prepared by the suspension polymerization of the modified starch and 2-ethylhexyl acrylate (2-EHA). The highest oil-absorption capacity of B-PEHA prepared showed at the condition of the modified starch content of 10 g and ethyleneglycol dimethacrylate (EGDMA) of 0.133 wt%. Its maximum oil absorption capacity per g of oil absorber was chloroform 30.88 g, toluene 19.75 g, xylene 18.78 g, tetrahydofuran (THF) 15.96 g, octane 11.43 g, hexane 9.5 g diesel oil 12.80 g, and kerosene 13.79 g, respectively. The biodegradation of poly-2-ethylhexylacrylate (B-PEHA) determined by enzymatic hydrolysis showed approximately 17~20%. The results showed that the preparation of the biodegradable oil absorption resin is available using the modified starch.

• 자원리싸이클링
• /
• 제2권2호
• /
• pp.39-44
• /
• 1993

어룡탄광에서 산출되는 저질인 무연탄 슬러리를 Oil agglomeration 처리법으로 탈수하여 다음과 같은 결과를 얻었다. 저질 무연탄은 기름과 응집체(COM)를 형성하여 물과의 비중차이에 의해서 약 80%까지 분리되고 이때 COM을 만드는 각각 석유, 경유 또는 중유의 첨가량은 시료량의 10%정도이다. 무연탄에서 가연성분을 회수하고 회분을 제거할 수 있는 능력은 기름의 첨가율, 광액 농도, 광립의 입도, 교반시간, 교반강도에 크게 영향을 받는다. 최적조건인 상태에서 가연물질의 회수율은 약 95%까지 증가되었고, 회분의 함유율은 30%에서 13.5%로 감소되었다.

• KSBB Journal
• /
• 제13권2호
• /
• pp.209-213
• /
• 1998

The characteristics of de-emulsification of pertroleum emulsion by Nocardia amarae were investigated. Insoluble medium containing n-hexadecane was more effective than soluble medium in de-emulsification of emulsion containing diesel and bunker C as the organic phase. Emulsion made by the addition of xanthan or bioemulsifier was de-emulsified by N. amarae, and longer culture age was effective. In low viscosity range, organic phase with longer carbon chain was more effective. The contact, angle between bacterial film and water droplet in air increased from 16 degree for 4 day culture age to 26 degree for 15 day. The contact angle between bacterial film and water droplet in kerosene, n-heyxane or n-hexadecane also increased to greater than 100 degree after 3 day culture age. The hydrophobicity of bactgerial film increased according to the culture age.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.523-526
• /
• 2006

The target of this work was the process development of demonstration plant to produce the high quailty alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70t/y and the pi lot plant of 360 t/v had been developed. Main research contents in this step were the process performance test of pilot plant ot 360ton/year and the development of demonstration plant of 3 000 t/y which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/v showed components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1116-1123
• /
• 2021

해수에 유출된 유류는 대기와 해수와의 접촉을 통해 다양한 풍화 과정(증발, 확산, 분산, 유화, 용해, 산화, 침전 및 생물분해 등)을 통해 물리·화학적 변화와 함께 생물학적 분해과정을 겪는다. 본 연구에서는 여러 가지 풍화작용 중 가장 즉각적이고 빠르며 오염물질의 질량에 가장 큰 영향을 미치는 인자라고 알려진 증발(evaporation)에 대한 영향을 확인해보고자 하였다. 휘발유, 등유, 경유를 대상으로 25 ℃(해수 연평균 온도)와 35℃(적도 부근 온도) 조건에서 유류의 휘발특성을 비교하였다. 이를 위해, 일정 기간마다 채취한 유류를 전처리하여 GC/MS 분석을 수행하고, 탄화수소의 변화량을 계산하여 비교하였다.

• 한국화재소방학회논문지
• /
• 제28권3호
• /
• pp.43-48
• /
• 2014

본 연구는 구획된 공간에 인화성 단일 물질을 채우고 착화된 화염의 전파 속도, 방사 범위, 확산 패턴 및 연소 완료 시간 등을 해석하는 데 있다. 화염의 전파 속도는 등유가 0.2 s로 가장 빠르고, 알코올이 82.1 s로 가장 늦었다. 화염이 착화된 후 화염이 가장 빠르게 최성기에 도달한 것은 시너이었고 19.0 s가 걸렸다. 그리고 가장 늦은 것은 알코올로 138.6 s로 측정되었다. 인화성 액체 200 ml가 연소 완료되는 시간은 시너가 79.9 s로 가장 짧았고, 가솔린 135 s, 등유 170 s, 경유 231.4 s, 알코올 337.0 s 등으로 측정되었다. 그리고 인화성 액체가 연소될 때 화염의 하단 부분은 층류 패턴이 지배하였고, 상단 부분은 난류 패턴을 나타냈다. 대두유의 실험에서 착화시킨 화원을 제거하면 화염은 자연 소화되어 연소가 진행되지 않았고, 불완전 연소에 따른 흰색의 연기가 발생하는 것을 알 수 있었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권4호
• /
• pp.63-72
• /
• 2012

The main objective of this study is to assess the compatibility between Korean ministry of environment (KME) standard and ISO (KS I ISO) standard for the determination of BTEX and TPH content in soil. We carried out comparison analysis for both methods using CRM and matrix spiked samples. In case of GC-MS analysis for BTEX, we got statistically (significance level: 0.05) the same results from KME standard (ES 07600.1) and ISO standard (KS I ISO 15009). However, it showed statistically (significance level: 0.05) different results when TPH was analyzed by KME standard (ES 07552.1) and ISO standard (KS I ISO 16703). To clarify the reason why both methods produced different results for TPH content, we also did some additional experiments in terms of differences in extraction, clean-up and target hydrocarbon range. Extraction with polar and non-polar compounds mixed solvent (acetone+n-heptane) of KS I ISO 16703 showed higher extraction efficiency than with only non polar solvent (dichloromethane) extraction of ES 07552.1 by about 9%. While column type clean-up of KS I ISO 16703 showed the reduction in TPH content between before and after clean-up, batch type of clean-up of ES 07552.1 did not show any changes in TPH content through clean-up process. The target hydrocarbon range of ES 07552.1 and KS I ISO 16703 is $C_8{\sim}C_{40}$ and $C_{10}{\sim}C_{40}$, respectively. From this point of view, kerosene and JP-8 contaminated soil showed higher RPD (relative producibility deviation) values between results by both method than that of lubricant or diesel contaminated soil. The higher content of hydrocarbon ($C_8{\sim}C_{10}$) in kerosene and JP-8 played an important role in increasing RPD values in addition to the effects caused by different solvents and clean-up method. Consequently, it was concluded that both methods (ES 07552.1 and KS I ISO 16703) were not compatible.

• Journal of Biosystems Engineering
• /
• 제5권2호
• /
• pp.58-66
• /
• 1980

A survey was conducted to investigate the power tiller accidents. Eight provinces were covered for this study, and 278 power tiller owners were selected randomly by computer random generator. The results are summarized as follows : A. Frequency of accident. (1) Each power tiller had an accident 0.98 times a year and once every 361 hours of use. Higher frequency of accident was found during the miscellaneous operations including the preparation for farming operation, and there was one accident for every 92 hours of use. (2) The power tiller, which are more than six years old, met an accident 1.19 times a year , or one every 311 hours of use. This value was the highest one compared with any other group. (3) Kerosene engine power tillers met an accident 0.97 times a year, or one every 389 hours of use. It was one tie a year, or once every 329 hours of use for diesel engine power tillers. (4) Among diesel-engine power tillers, 10 horse-power group showed a higher frequency tillers. B. Cause of accident (1) The accidents of power tiller were mainly of sefety , which occurred due to the lack of attention during the operation and 47.4% of the total accidents. The next was of accidental, which represented 26.3% of the total accidents. (2) High percentage of safety accidents occurred during the preparation for farming operation including adjustment. Most of the accidental accidents occurred during the transportation. (3) Lower frequency of accident was found in the power tiller group which were operated by the 21-40 years old operator in comparison with that of the power tiller which was operated by other age group. Power tillers which were operated by high school graduates experienced less accidents compared to other education levels. C. Damage by accident (1) Eighty seven pescents of the total accidents caused damage to the power tiller operator , and 13 % of the total accidents caused property damage only. (2) With regard to the damage to the power tiller operator, 73.8% of the total accidents caused light injury but 26.3% caused heavy injury. (3) Accidents which occurred during machine preparation , and farming operations caused minor injury to the operator, but the accidents during transportation caused heavy injury which cost more than 15 days for recovery. (4) Among the 39 accidents , which caused property damage 18 accidents were from the transportation . Among the total property damage accidents 53.8% were light one which cost only less than 1,000 won. (5) The property damage from each accident cost 1,017 won, on the average, with regard to the kinds of operation, the highest property damage occurred during transportation work, with the value of 2, 965won.

• 한국환경과학회지
• /
• 제16권7호
• /
• pp.799-804
• /
• 2007

Oil spill caused severe effects on the marine fauna and flora due to direct contact of organisms with the oil and even in regions not directly affected by the spill. This study was conducted to understand the effects of the oil spill accidents and the use of dispersant on the red tide of Cochlodinium polykrikoides. Crude oil produced in Kuwait, bunker-C, kerosene and diesel oil, and a chemical dispersant produced in Korea, were added with a series of 10 ppb to 100 ppm in the f/2-Si medium at $20^{\circ}C$ under a photon flux from cool white fluorescent tubes of $100\;mol\;m^{-2}\;s^{-1}$ in a 14: 10 h L:D cycle for the culture of C. polykrikoides. In low concentrations of ${\leq}$ 1 ppm of examined oils no impact on the growth of C. polykrikoides was recorded, while in high concentration of ${\geq}$ 10 ppm, cell density was significantly decreased with the range of 10 to 80% in comparison with the control. The growth of C. polykrikoides after the addition of the dispersant and the mixtures combined with oils and a dispersant of ${\geq}$ 10 ppm appeared to decrease, whereas the growth of C. polykrikoides exposed to ${\leq}$ 100 ppb showed little serious impact. However, almost all the C. polykrikoides cells were died regardless of a dispersant and combined mixtures within a few days after the addition of high concentrations.