• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1443-1445
• /
• 1996

Hydrogen passivation enhances the electrical characteristics of poly-Si TFT(Thin Film Transistor). However, the weak Si-H bonds, generated during hydrogenation, degrade the stability of the device. So, we carried out the passivation treatment with $NH_3$ or $N_2$. We compared the effect of $NH_3$ or $N_2$ passivation treatments with that of hydrogenation in terms of stability. Through the $NH_3$ passivation treatment, we obtained the most improved subthreshold swing of 1.2V/decade from the initial subthreshold swing of 1.56V/decade. When electrical stress was given, the $NH_3$ passivated devices showed best electrical stability.

• Atmosphere
• /
• v.19 no.4
• /
• pp.331-344
• /
• 2009

A sensitivity study has been performed using ARPS (Advanced Regional Prediction System) version 5.2.10 in a downslope windstorm case of 12-13 February 2006. The purpose of this study was to find out the role of the inversion layer of temperature mainly in relation to the strength of the downslope winds over the Yeongdong region located downstream of the Taebaek mountains. Under the conditions of N (Brunt-$V{\ddot{a}}is{\ddot{a}}la$ frequency)=0.008 and N=0.016, the effects of the presence of the inversion layer, its variation of height of the layer, and the depth of the layer were identified. The sensitivity experiments suggested that the inversion layer effected the downstream wind speed of the mountains under both conditions of N=0.008 and N=0.016, and notably when the inversion layer was located near the mountain crest the downstream wind speed of the mountains was strong (~ $27ms^{-1}$) only under the condition of N=0.016. In addition, when the atmosphere was rather stable (N=0.016) and the depth of the layer was relatively thin (765 m) the downstream wind speed of the mountains was the strongest (~ $30ms^{-1}$) among the sensitivity experiments.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.189-195
• /
• 2007

The purpose of this study was to analyze the effects of shoes with curved out-sole on the pressure, reaction force(sum of pressure) on foot and relations between the rolling speeds and pronation of foot. The foot pressure, reaction force and pressure center on the foot surface of shoe were measured with NOVEL padar system, and 3 type shoes were used to compare the position and speed of pressure center and the foot reaction force, which were s(target) shoe with soft cushions in middle part of out-sole and curved out-sole, m shoes with two type- soft, hard, hardness out-sole and curved out-sole and n shoes with flat out-sole. The subjects were 13 female university students, had weared the 3 type shoes for 6 weeks on two-weeks shifts for adaptation before experiment and put on 3-type shoes repeatedly and randomly and walked on treadmill with 3.5km/h and 80 steps/min. The data were captured with 30Hz and readjusted with 5kgf threshold reaction force. The results can be summarized as follow. 1. There were no difference in maximum reaction force on initial contact period and total foot impact, but statistical difference in maximum reaction force on takeoff period : s, m, n in ascending order. 2. There were some difference in rolling speeds for support periods. At initial contact, the rolling speed of s shoes was fastest but at periods between first and second maximum reaction force, that of m shoes fastest. 3. There was a negative relation between rolling speeds and the length of lever arm on initial reaction force related to pronation. It seems shoes with various curved shapes and hardness could make effects on the rolling features and the rolling speed also have some relationships with walking efficiency, absortion of impact and pronation.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.219-229
• /
• 2008

A pH sensitive ternary copolymer gel was synthesized in the presence of ethylene glycol dimethacrylate (EGDMA) as a crosslinking agent through radical polymerization of vinyl acetate (VA), acrylic acid (AA) and methyl acrylate(MA) with a weight ratio of 1 : 1.3 : 1. A number of experiments were carried out to determine the swelling behavior of the gel under a variety of pH conditions of the swelling medium. As the pH of the swelling medium was changed from 1.0 to 8.0 at $37^{\circ}C$, the gel showed a shift in the pH-dependent swelling behavior from Fickian (n=0.3447) to non-Fickian (n=0.9125). The resulting swelling parameters were analyzed using graphical and statistical methods. The results showed that the swelling of the gel was controlled by the pH of the medium, i.e. $n=n_o{\exp}(S_{C}pH)$, where n is the diffusion exponent, $n_o(=28.9645{\times}10^{-2})$ is the pre-exponential factor and $S_C$(=0.1417) is pH sensitivity coefficient. The swelling behavior of the gel was also examined in aliphatic alcohols. The results showed that the rate of swelling increased with increasing number of carbon atoms in the alcoholic molecular chain.

• Journal of Korean Society on Water Environment
• /
• v.20 no.2
• /
• pp.104-109
• /
• 2004

Removal of nutrients from domestic sewage or industrial wastewater is needed to protect surface waters from eutrophication. This research was carried out to remove the nitrogen (N) and phosphorus (P) from the wastewater using the iron oxide obtained from the steel industry and the natural zeolite, respectively. This research was conducted in both batch and continuous systems. The removal efficiency of the nutrients was evaluated in the batch system using the varying concentrations of zeolite and iron oxide added. The removal efficiency of N was 60% at the 8g of zeolite added. In the same condition, the removal efficiencies of N were 76% and 82% at 12g and 16g of zeolite added, respectively. Removal efficiency of P was 80% as 8g of iron oxide was added. The removal efficiency of P was correspondingly increased as the concentration of iron oxide was increased. Continuous column system was also used to evaluate the removal efficiency of N and P by the addition of zeolite and ferric oxide, respectively. Removal efficiencies of N were compared in the mixed packing, two stage, and four stage columns, respectively. The removal efficiencies (80%) of N in the separate packed columns (two and four stages) were higher than the mixed packing column (400%) after 90 hr. Whereas, the removal efficiencies of P were similar to each other in the three columns.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.40-46
• /
• 1988

This study was carried out to determine the effects of nitrogen (N) fertilization levels (0, 100 and 200kg/ha) and formaldehyde (0.4,0.8 and 1.2%: w/w CM) on the chemical composition, dry matter (DM) yield and in-vitro dry matter digestibility (IVDMD) of forage rape (Brassica napus Subsp. oleifera) silage. The results obtained are summarized as follows : 1. Forage rape was a catch crop which was highly digestible and low concentration in NDF, ADF, cellulose and lignin. 2. The concentration of the water soluble carbohydrate (WSC) and buffering capacity (PK) was 17.9% and 6.77g/100g, respectively, provided the WSC to PK ratio was 2.65. 3. DM content of silage decreased as the rate of N fertilization increased, but concentration of ammonia-N decreased. IVDMD was not affected by the rate of N fertilization. 4. By the addition of formaldehyde, the pH and IVDMD were increased, but the DM, lactic acid, total organic acid and ammonia-N content of rape silage were decreased, that was effective as a silage additive for forage rape.

• Kyungpook Mathematical Journal
• /
• v.58 no.1
• /
• pp.19-35
• /
• 2018

Motivated mainly by certain interesting recent extensions of the generalized hypergeometric function [30] and the second Appell function [6], we introduce here the incomplete Lauricella functions ${\gamma}^{(n)}_A$ and ${\Gamma}^{(n)}_A$ of n variables. We then systematically investigate several properties of each of these incomplete Lauricella functions including, for example, their various integral representations, finite summation formulas, transformation and derivative formulas, and so on. We provide relevant connections of some of the special cases of the main results presented here with known identities. Several potential areas of application of the incomplete hypergeometric functions in one and more variables are also pointed out.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.111-111
• /
• 2009

In this work, we discuss simulation of surface acoustic wave device using Comsol Multiphysics. The structure SAW device based on piezoelectric thin film aluminum-nitride (AlN) on silicon was simulated. Some parameters of SAW device such as surface velocity, displacement of piezoelectric thin film were evaluated by software. Many modes and shapes of wave are also discussed in this paper. For evaluation physical parameters of AlN piezoelectric layer, the SAW resonator was modeled and simulation results were also compared with experiment results. we simulated arid evaluated the surface Rayleigh wave of AlN thin film on silicon substrate. Results simulation and experiment showed the surface velocity of AlN thin film was about 5200 m/s and shape of surface wave was also displayed. This paper has also proposed as method to study SAW characteristic of piezoelectric thin film and found out measurement values accurately of film such as stiffness matrix, piezoelectric matrix. These values are very important in calculation and design SAW device or MEMS device based on AlN piezoelectric layer.

• Applied Biological Chemistry
• /
• v.28 no.3
• /
• pp.124-130
• /
• 1985

Adsorption experiments of N-methylcarbamate insecticides on soils were carried out as a function of soil pH ana soil organic matter content with wet-and dry-land soils that were either oxidized or non-oxidized. The results obtained may be summarized as follows: The adsorption of N-methylcarbamate insecticides on soils was nearly leached to equilibrium after shaking for 12 hours. The adsorption of N-methylcarbamate insecticides was higher on sandy clay than sandy loam. The presence of organic matter in soil increased the adsorption of N-methrlcarbamate insecticides on soils. The mode of isothermal adsorption of N-methylcarbamate insecticides on soils was coincident with the Freundlich equation. Little effect of soil pH on the adsorption might be interpreted as that the adsorption was due to physical adsorption between N-methylcarbamate molecules and soil surface.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.1
• /
• pp.25-27
• /
• 2015

The experimental investigation of resistance and thermal impacts stability of coated conductor joints has been carried out. We measured resistances of solder layers with the thicknesses ca. 10, 20, 30 and $40{\mu}m$ and additionally studied their stability against thermal impacts. The obtained results show a high quality of this joints and their applicability, e.g., for design of current leads in various superconductive energy applications.