• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.129-133
• /
• 2006

In China, the traditional method of artificial and periodical cruise is still adopted for the AtoN management, which has brought many disadvantages to the work of the AtoN management, such as non real-time, fallibility, and low efficiency However, with the rapid development of AIS technique, now AIS equipments have been widely installed on ships, and on the other hand China Maritime Safety Administration (abr. China MSA) is carrying out the scheme of AIS base station network in china, based on which the digital AtoN will develop in the future. According to what have been analyzed above, this paper puts forward a design of AtoN wireless surveillance system based on AIS. The system consists of AIS on AtoN, AIS base station and AtoN management center. It can provide such functions as the information gathering, managing of AtoN and the service of navigation assistance. This paper gives the whole design including the work theory, the hardware structure and the software scheme of the system, and finally gives the simulation software of the AtoN management center. The AtoN wireless surveillance system brought forward by this paper will be more efficient with less repair cost and less work of the supervisors. It will bring revolutionary progress in the navigation aids system in China.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1673-1678
• /
• 2013

Lumazine protein is a member of the riboflavin synthase superfamily and the intense fluorescence is caused by non-covalently bound to 6,7-dimethyl 8-ribityllumazine. To figure out the binding modes and the structure of the N-terminal domain of lumazine protein, the wild type of protein extending to amino acid 118 (N-LumP 118 Wt) and mutants of N-LumP 118 V41W, S48W, T50W, D64W, and A66W from Photobacterium leiognathi were purified. The biochemical properties of the wild type and mutants of N-LumP 118 proteins were analyzed by absorbance and fluorescence spectroscope. The peak of absorbance and fluorescence of lumazine ligand were shifted to longer wavelength on binding to N-LumPs. The observed absorbance value at 410 nm of lumazine bound to N-LumP 118 proteins indicate that one mole of N-LumP 118 proteins bind to one mole of ligand of lumazine. Fluorescence analysis show that the maximum peak of fluorescence of N-LumP S48W was shifted to the longest wavelength by binding with 6,7-dimethyl 8-ribityllumazine and was shown to the greatest quench effect by acrylamide among all tryptophan mutants.

• Journal of the Korean Ceramic Society
• /
• v.48 no.1
• /
• pp.69-73
• /
• 2011

A $ZrO_2$ thin film as a corrosion protective layer was deposited on Zircaloy-4 (Z-4) clad material using $N_2O$ as a reactive gas by RF reactive magnetron sputtering at room temperature. The Z-4 substrate was located in plasma or out of plasma during the $ZrO_2$ deposition process to investigate mechanical and corrosive properties for the plasma immersion. Tetragonal and monoclinic phases were existed in $ZrO_2$ thin film immersed in plasma. We observed that a grain size of the $ZrO_2$ thin film immersed in plasma state is larger than that of the $ZrO_2$ thin film out of plasma state. In addition, the corrosive property of the $ZrO_2$ thin films in the plasma was characterized using the weight gains of Z-4 after the corrosion test. Compared with the $ZrO_2$ thin film immersed out of plasma, the weight gains of $ZrO_2$ thin film immersed in plasma were larger. These results indicate that the $ZrO_2$ film with the tetragonal phase in the $ZrO_2$ can protect the Z-4 from corrosive phenomena.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.1-5
• /
• 2013

In this paper, we investigated the etching characteristics of the TaN thin films and the surface reaction of TaN thin films after etching process. The etching characteristics of the TaN thin films were carried out using inductively coupled plasma (ICP). The etch rate and the selectivity of TaN to $SiO_2$ and TaN to PR were measured by varying the gas mixing ratio, RF power, DC-bias voltage, and process pressure in CF-based plasma. The surface reaction of TaN thin films were determined by x-ray photoelectron spectroscopy (XPS).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.168-175
• /
• 2022

With the recent development of nanotechnology, its application in the field of construction materials is continuously increasing. However, until now, studies on the bond characteristics of concrete and rebar for applying high-strength lightweight concrete with a compressive strength of 50 MPa and a unit weight of 16 kN/m³ to structural members are lacking. Therefore, in this paper, 81 specimens of high-strength lightweight concrete with a compressive strength of 50 MPa and a unit weight of about 16 kN/m³ were fabricated and a direct pull-out tests were performed. The design code for the bond strength of ACI-408R and the experimental results are shown to be relatively similar, and as a result of the CEB-FIP and modified CMR bond behavior models through statistical analysis, it is shown to describe well on average.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.482-491
• /
• 2012

In the present work, comprehensive investigation of the ambipolar characteristics of two silicon (Si) tunnel field-effect transistor (TFET) architectures (i.e. p-i-n and p-n-p-n) has been carried out. The impact of architectural modifications such as heterogeneous gate (HG) dielectric, gate drain underlap (GDU) and asymmetric source/drain doping on the ambipolar behavior is quantified in terms of physical parameters proposed for ambipolarity characterization. Moreover, the impact on the miller capacitance is also taken into consideration since ambipolarity is directly related to reliable logic circuit operation and miller capacitance is related to circuit performance.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.667-671
• /
• 1998

The photoluminescence (pL) characteristics of hydride vapor phase epiyaxy (HVPE) grown GaN films on $MgAl_{2}O_{4}$ substrate were investigated with several growth conditions. The GaN films on $MgAl_{2}O_{4}$ substrate is autodoped with Mg atoms which thermally out-diffused from substrate lead to a PL characteristics of impurity doped ones. The Mg-related emission band intensity decreased with growth temperature may due to the evaporation of Mg atoms at the GaN film surfaces. and it also decreased with GaN film thicknesses. We can estimate the diffusion coefficient of Mg atoms in GaN under the consideration of diffusion phenomena between two infinite solids lead to a value of D= 2$\times$$lO^{-10}\textrm{cm}^2/sec.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.39-47
• /
• 2023

The demand for lightweight and high-strength materials is increasing. However, studies on the bond of concrete and reinforcing bars for high-strength lightweight concrete with a compressive strength of 120 MPa and a unit weight of 20 kN/m³ to structural members are lacking. Therefore, in this paper, 108 specimens of high-strength lightweight concrete with a compressive strength of 120 MPa and a unit weight of about 20 kN/m³ were fabricated, a direct pull-out test was performed, and the bond characteristics were evaluated by comparing the test results with design code. Compared to the decrease in unit weight, the solid bubble shows relatively little reduction in compressive strength and modulus of elasticity. It was f ound to have larger slip and parameter values than concrete with low compressive strength and unit weight.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.579-582
• /
• 2000

(R,S)-3-amino-n-butanoic acid$(DL-\;{\beta}\;-homoalanine)$ has been kinetically resolved using Alcaligenes denitrificans Y2k-2 as a biocatalyst, which was isolated from soil by enrichment culture, which was carried out with minimal media containing (R,S)-3-amino-n-butanoic acid as a sole nitrogen source. The enzyme which peformed this kinetic resolution assumed to belong to the ${\omega}-transaminase$ family, because A. denitrificans used pyruvate as amino acceptor and its transaminase activity was inhibited by gabaculine, aminooxy acetic acid and hydroxylamine. In whole cell reaction, (R,S)-3-amino-n-butanoic acid was kinetically resolved to the corresponding (R)-3-amino-n-butanoic acid with excellent E (>100) in the presence of pyruvate as an amino acceptor at $37^{\circ}C$. (S-specific) We observed the substrate inhibition for pyruvate at 100mM. In this study, characteristics of transaminase activity of Alcaligenes denitrificans Y2k-2, such as substrate specificity and thermostability, are carried out for the development of (R)-3- amino-n-butanoic acid production system.

• Journal of the Korean Ceramic Society
• /
• v.59
• /
• pp.338-349
• /
• 2020

Large scale with high-purity hexagonal aluminum nitride nanoparticles (AlN NPs) was synthesized using DC thermal plasma arc discharge method (TPAD). Argon gas was used as the plasma forming gas, while ammonia (NH₃) gas was used as the reactive gas, which was fed into the reactor at a constant flow rate of 5 LPM. In order to optimize the process for high yield, the experiments were carried out at various plasma input powers, such as 1.5, 3.0, and 4.5 kW. Following the optimization, to examine the influence of using pure nitrogen gas, an experiment was also carried out in the nitrogen ambience. The phase identification and structural determination of the synthesized NPs were carried out using XRD and Raman spectroscopic analyses. While the morphology, particle size, and elemental compositions of the synthesized NPs were observed from SEM, HRTEM, XPS, and EDX analyses. The photoluminescence response was confirmed from the PL spectrum. The PL emission peaks observed around 440 nm (2.8 eV) and 601 nm (2.07 eV), respectively, which correspond to the UV blue and red band emissions of both AlN and Al/AlN NPs. The results show that the synthesized nano-AlN NPs exhibit excellent crystallinity with a high yield of approximately 210 g/h. The current plasma technology can be regarded as a perfect potential process for developing nano-AlN powders with improved efficiency.