• Nuclear Engineering and Technology
• /
• v.47 no.7
• /
• pp.859-866
• /
• 2015

The aim of this work is to investigate the transport mechanism of radioactive nuclides through the reverse osmosis (RO) membrane and to estimate its effectiveness for nuclide separation from radioactive liquid waste. An analytical model is developed to simulate the RO separation, and a series of experiments are set up to confirm its estimated separation behavior. The model is based on the extended Nernst-Plank equation, which handles the convective flux, diffusive flux, and electromigration flux under electroneutrality and zero electric current conditions. The distribution coefficient which arises due to ion interactions with the membrane material and the electric potential jump at the membrane interface are included as boundary conditions in solving the equation. A high Peclet approximation is adopted to simplify the calculation, but the effect of concentration polarization is included for a more accurate prediction of separation. Cobalt and cesium are specifically selected for the experiments in order to check the separation mechanism from liquid waste composed of various radioactive nuclides and nonradioactive substances, and the results are compared with the estimated cobalt and cesium rejections of the RO membrane using the model. Experimental and calculated results are shown to be in excellent agreement. The proposed model will be very useful for the prediction of separation behavior of various radioactive nuclides by the RO membrane.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.989-999
• /
• 2019

This paper proposes a fault-tolerant control strategy with finite control set model predictive control (FCS-MPC) based on hierarchical optimization for five-level H-bridge neutral-point-clamped (5L-HNPC) inverter-fed induction motor drives. Fault-tolerant operation is analyzed, and the fault-tolerant control algorithm is improved. Adopting FCS-MPC based on hierarchical optimization, where the voltage is used as the controlled objective, called model predictive voltage control (MPVC), the postfault controller is simplified as a two layer control. The first layer is the voltage jump limit, and the second layer is the voltage following control, which adopts the optimal control strategy to ensure the current following performance and uniqueness of the optimal solution. Finally, simulation and experimental results verify that 5L-HNPC inverter-fed induction motor drives have strong fault tolerant capability and that the FCS-MPVC based on hierarchical optimization is feasible.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.1-8
• /
• 2015

In this paper, computational evaluation method for fatigue crack growth rate(FCGR) based on material viscoplastic-damage model is proposed. Viscoplastic-damage model expressing material constitutive behavior of 7% nickel steel is introduced and is implemented into commercial finite element analysis(FEA) code, ABAQUS, as a user defined material subroutine(UMAT) for application in the FEA environments. Verification of developed UMAT and material parameters of material model are carried out by uniaxial tensile test simulations of 7% nickel steel. Moreover, jump-in-cycles procedure and rearrangement of critical damage are employed and also implemented to the ABAQUS UMAT for fatigue damage analysis. Typical FCGR test results such as relationship between crack length and number of cycles and relationship between da/dN and ${\Delta}K$ could be obtained from FCGR test simulation using developed UMAT and these results are compared with experimental results in order to verify of proposed computational method.

• Journal of Sasang Constitutional Medicine
• /
• v.7 no.1
• /
• pp.69-101
• /
• 1995

Using Bi-Digital O-Ring Test which was developed by Ohmura Toshiaki, constitution classification by the vegetables' was measured by various muscle power measurement meters and the results are as follow : 1. Pinch guage (Model : pc5030HPG, Japan) is the guage to measure finger power between the thumb and second finger, Grip Strength Dynamometer (Model : T.K.K. 5101, Japan) is to measure the hand power (hand dynamometer), Back Strength dynamometer (Model : T.K.K. 5102, Japan)is to measue back muscle strength, Vertical Jump Meter (Model : T.K.K. 5106, Japan) is to measure the height of jump. The above guages were used and its result found that the radish, potato, carrot and cucumber can influence to the muscle strength was not true. 2. When the physical constitution is distinguished vy the O-Ring Test method, Taeyangin's rate appeared as average 21% although it was insistedthat there will be only 0.03-0.1%. This means that the influence power of vegetable doest not appear according to the physical constitution but it appears accidently according to the examinee's emotion about the material such as vegetable etc. as favor or unfavor. 3. It was found that the result of O-Ring Test is the same at any time and at any place was not true. there is no reemergence character. 4. The import of O-Ring Test method to the physical discriminatio disregarded that the mental facor influences absolutely to the physical heath in the ideological physical constitution medicla science. 5. 'O-Ring Test method is a objective judgement method'. is wrong judgement. As you see on the above result, Bi-Digital O-Ring Test set the changeable voluntary muscle as the standard of the judgement, that was first mistake logically, second in spite of leass influence of mental influence by the examiner and examinee than the vegetable discrimination influence, the test disregarded the influence. Thire, only grasp of some material on hand can influence to the voluntary was a wrong theory disregarding the physiology. Finally the misunderstaning his subjective view as an objective view in spite of examiner and examinee's strong influence. Therefore such kind of physical descrimination method must be sublated.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.309-317
• /
• 2018

The purpose of this study was to investigate the effect of bone age on physique and physical fitness in elementary school students. For this purpose, the structural equation model test was conducted based on the three-year longitudinal study. The results were as follows. First, bone age in boys and girls (1st~3rd grade) has a direct effect on the change of body size, but it does not affect the change of physical strength. Second, the bone age of the senior male students(4~6 grade) gave a direct effect on the change of physique, 50m running, and sit-up. On the other hand, it gave an indirect effect on push-ups, sitting basketball throws, and standing long jump. Third, the bone age of the female students(grades 4~6) affected directly on body size change, sit-up, side step and indirect effect on 50m running, half squat jump, and standing long jump. These results indicated that the evaluation of the bone age of the subjects should be included in the exercise ability evaluation items for the male and female students in elementary school over the fourth grade in relation to the myofunction.

• Journal of Powder Materials
• /
• v.18 no.1
• /
• pp.41-48
• /
• 2011

As a pore precursor, carbon black with different content of 0 to 60 vol% were added to (Ba,Sr)$TiO_3$ powder. Porous (Ba,Sr)$TiO_3$ ceramics were prepared by pressureless sintering at $1350^{\circ}C$ for 1h under air. Effects of carbon black content on the microstructure and PTCR characteristics of porous (Ba,Sr)$TiO_3$ ceramics were investigated. The porosity of porous (Ba,Sr)$TiO_3$ ceramics increased from 6.97% to 18.22% and the grain size slightly decreased from $7.51\;{\mu}m$ to $5.96\;{\mu}m$ with increasing carbon black contents. PTCR jump of the (Ba,Sr)$TiO_3$ ceramics prepared by adding carbon black was more than $10^5$, and slightly increased with increasing carbon black. The PTCR jump in the (Ba,Sr)$TiO_3$ ceramics prepared by adding 40 vol% carbon black showed an excellent value of $9.68{\times}10^5$, which was above two times higher than that in (Ba,Sr)$TiO_3$ ceramics. These results correspond with Heywang model for the explanation of PTCR effect in (Ba,Sr)$TiO_3$ ceramics. It was considered that carbon black is an effective additive for preparing porous $BaTiO_3$ based ceramics. It is believed that newly prepared (Ba,Sr)$TiO_3$ cermics can be used for PTC thermistor.

• Journal of Environmental Science International
• /
• v.14 no.1
• /
• pp.41-51
• /
• 2005

Using three-dimensional non-hydrostatical numerical model with one way double nesting technique, atmo­spheric circulation in the mountainous coastal region in summer was investigated from August 13 through 15, 1995. During the day, synoptic westerly wind blows over Mt. Mishrung in the west of a coastal city, Sokcho toward the East Sea, while simultaneously, easterly upslope wind combined with both valley wind from plain (coast) toward mountain and sea-breeze from sea toward inland coast blows toward the top of the mountain. Two different directional wind systems confront each other in the mid of eastern slope of the mountain and the upslope wind goes up to the height over 2 km, becoming an easterly return flow in the upper level over the sea and making sea-breeze front with two kinds of sea-breeze circulations of a small one in the coast and a large one in the open sea. Convective boundary layer is developed with a thickness of about 1km over the ground in the upwind side of the mountain in the west and a thickness of thermal internal boundary layer from the coast along the eastern slope of the mountain is only confined to less than 200 m. On the other hand, after sunset, no prohibition of upslope wind generated during the day and downward wind combined with mountain wind from mountain towardplain and land-breeze from land toward under nocturnal radiative cooling of the ground surfaces should intensify westerly downslope wind, resulting in the formation of wind storm. As the wind storm moving down along the eastern slop causes the development of internal gravity waves with hydraulic jump motion in the coast, bounding up toward the upper level of the coastal sea, atmospheric circulation with both onshore and offshore winds like sea-breeze circulation forms in the coastal sea within 70 km until midnight and after that, westerly wind prevails in the coast and open seas.

• Animal cells and systems
• /
• v.2 no.4
• /
• pp.477-481
• /
• 1998

Previous studies have postulated that isometric animals exert similar locomotory capacity (speed, distance) because the amount of energy available for the motion would be the same regardless of body mass (m). To test propriety of this theory, we examined body shape and take-off potential of two frog species, Rana nigromaculata (powerful jumpers) and Bombina orientalis (slow hoppers). Morphological measurements included thigh muscle mass (indicative of total muscle force), hindlimb length (L, determining acceleration distance), and interilial width (shaping take-off motion). To gauge locomotory capacity, take-off speed (v) and take-off angle ($\theta$) were measured from video analyses, and jump distance (R) and take-off Power ($P_{t}$ ) were calculated from equations $R=V^{2}sin2\theta/g$ and ($P_{t}$＝$㎷^{3}/2L$(where g is the gravitational constant). Scaling exponents of morphometric variables for both species were 0.96-1.11 for thigh muscle mass, 0.28-0.29 for hindlimb length, and 0.30-0.36 for interilial width. Scaling exponents of locomotory performance for the two species were -0.01-0.14 for take-off speed, 0.24-0.31 for jump distance, and 0.66-0.84 for take-off power. The results demonstrate that the frogs of this study showed isometric body shape within species, but that take-off response changed allometrically with body mass, indicating that these data did not fully support the previous proposition. An exception was found in take-off speed of B. orientalis, in which the speed changed little with body mass (slope＝-0.01). These findings suggest that the energy availability approach did not properly explain the apparent allometric relations of the take-off response in these animals and that an alternative model such as a power production approach may be worth addressing.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.1
• /
• pp.12-19
• /
• 1991

A numerical analysis is carried out for the nonlinear phenomena of the bubble oscillator. The model is based on the Keller's formulation for the bubble dynamics. Interpretation of the bubble interior is based on the formulation by Prosperetti. His formulation adopts the energy equation for the analysis of the bubble interior. The numerical simulation Shows typical nonlinear phenomena in its frequency response. Among such nonlinear aspects are the jump phenomenon, the shift of natural frequency of the system, and the appearance of superharmonic resonances. It is deduced that the nonlinear frequency response is dependent upon the initial condition of the bubble oscillator and some multi-valued frequency region can appear in the response curve. Nonlinear phenomena appeared in the bubble oscillator is compared with those of the Duffing equation and it may be said that the bubble dynamic equation has similar nonlinear aspects to the Duffing equation.

• Atmosphere
• /
• v.16 no.2
• /
• pp.67-83
• /
• 2006

The statistical analysis for the springtime windstorm in Korea shows that Yeongdong region has the highest occurrence frequency during recent 10 years. The objective of this study is to find possible mechanisms for the downslope windstorm formation in the Yeongdong region by using a mesoscale numerical model, WRF. Dynamical process, wave breaking (hereafter WB), is qualitatively investigated as the candidate mechanism for a windstorm event occurred in 5 April, 2005. WB is developed in upper troposphere downstream, since stable air is lifted by the Taebaek mountain. This process can cause and maintain the severe downslope windstorm by drawing the upper flow down to the surface. And the intensified downslope wind leads the hydraulic jump (hereafter HJ) in downstream region. Froude numbers at Chuncheon (upslope side), Seorak Mountain (crest), Yangyang (lee side), and the East Sea (distant downstream position) are estimated by about 0.4, 1.0, 1.6, and 0.6, respectively. This result implies that the accelerated and supercritical (Fr>1) flow adjusts to the ambient subcritical (Fr<1) conditions in the turbulent HJ. In addition, we find the formation of upstream inversion near top level of the mountain cause the intensification of HJ. Experiments to examine the orographic effect on the mechanisms suggest that the magnitudes of WB and HJ are larger in the experiment of higher topography, but there is no significant difference of windstorm magnitude among the experiments. Another important result from these sensitivity experiments is that the intensity of downslope windstorm strongly depends on the magnitude of upper (2~4 km) wind in upstream side.