• Journal of radiological science and technology
• /
• v.47 no.2
• /
• pp.87-95
• /
• 2024

Most knee axial radiographs, known as sunrise and skyline view, were performed with the patient in the prone position. The authors tried to address some of the shortcomings of conventional radiography by developing a new radiography method, K-RAD. According to previous research, the K-RAD method showed a wider patellar-femoral joint space than conventional radiography and provided a clear patellar hemi-lateral image with a constant gap between the femoral trochlear groove and tibial tuberosity. The authors worked with an orthopedic specialist to perform radiography using the K-RAD method rather than using existing methods, and as a result, the two knees were aligned correctly and a clear image of the patellar-femoral joint space was created. The authors propose the K-RAD method for knee axial radiography because the K-RAD method provides a sense of stability to the patient and provides images with high diagnostic value.

• Land and Housing Review
• /
• v.5 no.2
• /
• pp.57-68
• /
• 2014

As social needs are increasing to minimize the occurrence of external effect due to urban development and to diffuse the benefits of development to surrounding areas, diverse cooperative planning methods are increasingly being discussed. In the long term, laws and systems need to be refined to support cooperative planning, but prior to such development, elements, procedures, and methodologies wherein cooperative planning in U.S.A cases could be implemented were examined to derive the alternative to and implications of cooperative planning that can apply not only to single administrative districts but also to complex boundary new towns being developed by various local governments. This paper surveyed and analyzed the cases of Wisconsin State of the U.S.A, thereby deriving the following implications. First, joint planning areas should be established within the boundary area of various local governments to establish cooperative planning areas in special areas such as complex boundary new towns, and to this end, urban planning means should be prepared. Together with such efforts, to boost the flexibility of cooperative planning, life sphere unit-based planning unit should be established, and a well-organized operation system to activate communities should be prepared. Also, revenues, generated through regional growth, should be distributed to individual local governments through joint tax according to the agreed-upon ratios, and as such, measures to share services and operate joint tax in small-size regions should be secured. Together with such efforts, to establish cooperative governance, measures to manage conflicts through the participation by stakeholders and arbitrators should be prepared from the planning stage, and measures for implementing cooperative planning at the level of basic urban planning should be prepared.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.367-372
• /
• 2010

A power plant's heat exchangers work under poor conditions, such as high temperature, high pressure, corrosion, mechanical stress and vibration. Especially, partial joint-weld of heat exchanger's header to stub-tube is the place where incomplete penetration flaws can easily occur. But, it is hard to evaluate the safety of the structure by conventional nondestructive testing techniques. So it is necessary to test integrity of the weld inside and to develop testing technique and equipment that can detect the flaws at the weld point in order to enhance reliability of the test result. In this study, we developed a suitable automated ultrasonic testing system that can inspect the partial joint-weld of header to stub-tube of power plant. Finally, we showed the efficiency of the automated ultrasonic-testing-system from the application.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.55-63
• /
• 2019

In engineering problems, many random variables have correlation, and the correlation of input random variables has a great influence on reliability analysis results of the mechanical systems. However, correlated variables are often treated as independent variables or modeled by specific parametric joint distributions due to difficulty in modeling joint distributions. Especially, when there are insufficient correlated data, it becomes more difficult to correctly model the joint distribution. In this study, multivariate kernel density estimation with bounded data is proposed to estimate various types of joint distributions with highly nonlinearity. Since it combines given data with bounded data, which are generated from confidence intervals of uniform distribution parameters for given data, it is less sensitive to data quality and number of data. Thus, it yields conservative statistical modeling and reliability analysis results, and its performance is verified through statistical simulation and engineering examples.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1289-1293
• /
• 2010

A slipring or FORJ are usually adopted in order for power supply of Geo-centrifuge and input/output data acquisition. Since using slipring causes quite a lot electrical noise, an optical communication using FORJ becomes more general for data acquisition. Such data acquisition devices, however, require frequent maintenance and replacement due to deterioration by long term usage. DICT has set up a real-time wireless date acquisition system using wireless communication technology instead of FORJ. The system enables a remote measurement at any inertial acceleration field up to 100g level and provides as same performance as FORJ. The priority of this system is to use a normal modem substituting a special FORJ.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.1
• /
• pp.32-40
• /
• 1992

This content is a part of the results of the study on the development of the vacuum carburizing technology. In this study the vacuum carburizing furnace being used was the furnace that developed through the joint project between KIMM and Kyung-Pook Heat Treating Co. from June 1988 to Nov. 1990. And the used carburizing gas was the propane gas and the introducing methods of the gas applied two methods such as pulse and constant pressure. By this study we established the basis of the furnace manufacturing technology and of the processing technology in the vacuum carburizing. Above all in this work there are notable meanings in a viewpoint of the foremost research in home. Hereafter, we are going to industrialize the vacuum carburizing technology by improving the results of the present work and by developing the process for the mass production.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.5
• /
• pp.654-658
• /
• 2012

Osteoarthritis (OA) is the most common rheumatic pathology. One of the major objectives of OA research is the development of early diagnostic strategies such as those using proteomic technology. Synovial fluid (SF) in OA patients is a potential source of biomarkers for OA. The efficient and reliable preparation of SF proteomes is a critical step towards biomarker discovery. In this study, we have optimized a pretreatment method for twodimensional gel electrophoresis (2DE) separation of the SF proteome, by enriching low-abundance proteins and simultaneously removing hyaluronic acid, albumin, and IgG. SF samples pretreated using this optimized method were then evaluated by 1DE and 2DE separation followed by immunodetection of cartilage oligomeric matrix protein (COMP), a known OA biomarker, and by the identification of 3 proteins (apolipoprotein, haptoglobin precursor, and fibrinogen D fragment) that are related to joint diseases.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.181-182
• /
• 2017

This study analyzed the performance of new construction technology in construction site. The main results are as follows. First, 83.6% of the new technologies developed by SMEs(joint development by large enterprises) account for the majority. Second, new construction technology is mainly applied to construction and civil engineering, but it is mainly applied to four major types of work(waterproofing, soil and foundation, reinforced concrete, bridge). Third, the number of on-site applications with a construction value of less than 500 million accounted for 89.5% of the total, which indicates that new construction techniques are mainly applied to small-scale construction.

• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.208-214
• /
• 2008

With the development of the automobile industry, technologies for parts of an automobile with more convenient functions have progressed, but the manual clutch developed at the first phase of inventing means of transport still remains at the early stage of the automatic transmission despite numerous research and efforts. The traditional automatic transmission is mainly used in small cars and personal RV vehicles that include the slipped clutch disk. However, this research seeks an innovative technology that can be applied to all types of transportation operating the clutch, such as small cars, large vehicles, farm machines and vessels. In order to accurately decide the joint timing of the clutch disk according to the output of engine power that differs depending on driving conditions of vehicles, and to apply the half clutch state which frequently occurs in the manual transmission, the rpm of the engine can be used as the base to decide the joint timing of the clutch disk. This research has developed an electronic clutch module that can transmit the engine power by moving and jointing the clutch disk as much as the engine rpm increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5385-5392
• /
• 2014

Super typhoons develop as a result of meteorological changes. In 2012, Typhoons Bolaven and Denba reached Korea. The maximum instantaneous wind speed of the typhoons reached 60 m/sec. Harbor structures including sofa block sustained damage and loss by the abnormally high waves. In Korea, tetrapod blocks were installed the most for wave dissipating. Nevertheless, a structural evaluation of the tetrapod block has not been performed. This study examined the structural mechanism and weakness part of the tetrapod block under a range of boundary conditions. The block has weakness against a tensile force because it is plain concrete. The joint part of the legs is the most vulnerable to tensile stress. The weakest part can be reduced if the joint part is reinforced as a hunch.