• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.39-46
• /
• 2015

A outdoor termination installed at the outdoor substation is required to connect undergroud cables and overhead transmission lines. The joint box for AC transmission system is already developed and widely used to interconnect overhead and undergroud systems. But the development of the joint box for DC transmission system was only introduced from China and Japan, but theire developemnt staus and core technologies were not fully reported. In order to implement HVDC systems connecting ovehead transmission lines and undergroud cables, a outdoor termination should be developed, but the detailed specifications and information of this device were not reported. It is estimated that the development of the joint box for DC environment has some technical obstacles including insulating materials, electric field mitigation, thermal temperature rise, and space charge accumuations. Among this, the most important one is the DC elctrical insualtion design. Therefore, in order to investigate the DC elctrical insualton design of outdoor termination, the design of AC slip-on type outdoor termination is reffered, and DC electric field analysis performed to verify the possiblity of application of AC joint box into DC joint box. Especially for DC electric field analysis, temperature rise of insualting materials of a joint box was considered, because the conductivity of materials could be changed due to temperature rise. Furthermore, DC electric field analysis considering transinet state, and polarity reversal state were also investigated to verify which state is the most severe condition for the DC joint box. From the simualtion resulsts, it was shown that the value and the position of maximum electric field was obtained comparing AC state, DC state without temperaure rise, and DC state with temperaure rise. And it was confimred that severe DC electric field was observed considing temperaure rise. Finally, in order to reduce DC eletric field intensifation, different configuration of the joint box was applied and it was not possible to obtain satisfactory results. It means that the slight change of configuration of AC joint box was not the suitable soluton for DC joint box. It is essential to establish novel DC insulaton design skills and method for DC joint box to commercialze this product in the near future.

• Knowledge Management Research
• /
• v.17 no.2
• /
• pp.75-101
• /
• 2016

Since 2009, China has become biggest automobile supplier and consumer all over the world. Chinese government and automobile firms have been executed strategic and aggressive industry policy and business strategy for nurturing automobile industry as a core manufacturing industry. However, can we assure that all of these policy and strategy have positive effect on Chinese automobile industry? For fulfilling this gab, our research examined the government policy and firm's strategy in different development stage of Chinese automobile industry. According to research result, at initial stage(1983-1996), Chinese automobile industry has grown by technological learning and reverse engineering from Soviet Union, Japan and Germany. In rapid growing stage(1996-2009), Chinese automobile firms have succeed to develop and produce own brand product with 100% own technology. And this kind of quantum jump in technology development was conducted by joint venture policy and M&A strategy. However, at the fourth stage(2010-), Chinese government and firms have over invested and focused on Electric Vehicle manufacturing without developing core technology or SW. Overall, the old-fashioned policy and strategy module in manufacturing industry of China could have negative effect on its industry development.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.9 no.1
• /
• pp.1-16
• /
• 2021

Purpose - This study aims to analyze 7-Eleven's specific competitive advantage strategy according to changes in the Japanese convenience store industry by selecting 7-Eleven, a leading company in the Japanese convenience store industry, as a representative case study. Research design, data, and methodology - Due to the current COVID-19 situation, fact-finding such as interviews with key managers through visiting surveys was not possible, so this case study was carried out based on the literature such as official and unofficial data collected from the companies through e-mail and articles that have been published outside. Result - As a result of the analysis, the researcher found that five competing strategy factors, such as dominant strategy, innovative logistics system strategy, information system development strategy, joint product development strategy, and direct communication strategy have closely maintained the mutual relation to form a combined strategy focusing on the franchise development strategy. Conclusion - The competitive advantage of 7-Eleven is thought to have secured its competitive advantage by combining the five competitive strategies complementarily for rapid response to change, cost advantage, and differentiated advantage. The management implications specified in this study can be considered a reference for establishing a competitive strategy for sustainable growth of the convenience store industry in the fierce competition and saturated market environment of Korean convenience stores.

• Hwankyungkyoyuk
• /
• v.5 no.1
• /
• pp.112-137
• /
• 1993

As the concern with the creation of environmental problems and regulations about them becomes internationally growing, environmental cooperations with countries concerned are emerging as the first item on the political agenda. In case of South Korea, cooperations with countries in the Asian region is needed urgently. In particular, cooperations with North Korea will be an important factor to reunify the Korean peninsula as well as to solve environmental problems in South Korea. Accordingly, it is necessary to seek feasible alternatives and possibilities of coping with international environment in South and North Korea. This study is limited to literature study based on collecting materials and the testimony of former residents in North Korea. The period of study ranges from May to December in 1992. The research findings show the following environmental problems and alternatives : It is recognized in South Korea that the creation of environmental problems is product of economic development. Currently, the Korean government makes an effort to revise environmental administration and law, to encourage environmental education, and to proceed with environmental technology policies by establishing environmental policies together with economic development plans. North Korea ascribes the cause of environmental problems to colonial exploitation by Japan and the U.S. Environmental pollutants in North Korea is relatively less than South Korea, provisions such as environmental conservation movement, environmental education, and environmental administration and law are not well organized in the country. However, North korea will speed up its economic development to solve economic crises. Therefore, it is expected that industrial wastes, corrosion of nature, and water pollution will result in serious environmental problems. The fields expected to cooperate with South and North Korea are in the following : South Korea may adopt the model of the former East and West Germany and proceed to cooperate with North Korea in public sector as well as private sector. The possible programs are such as academic exchange to conserve environment, joint research in the area of the Demilitarized Zone, conservation of ecosystems around Imjin and Pukhan Rivers, South Korea's support of advanced environmental technology and industrial and financial aid to North Korea. Conflicts between countries concerned in the North East Asian region will be caused by the responsibilities of pollutions because of the seashore development of the Yellow Sea by South Korea and increasing seashore industrial complexes around the Yellow Sea in China, Therefore, it is desirable that the two countries will participate in organizations related to environment. Joint projects between South and North Korea will be as follows : 1. Construction of long-range monitoring system : 2. Investigation of the state of pollutions around the Yellow Sea and alternatives : 3. Construction of joint monitoring system to regulate the movement of pollutants : 4. Cooperation of environmental technology and exchange of information ; and 5. Support of Cooperation of environment in private sector. Efforts to cooperate with North korea is expected to overcome differences between the two countries as well as to encourage unification of the korean peninsula, which will lead to reducing the cost of environmental recovery. These efforts will also contribute to the maintenance for peace and stability on the korean peninsula as well as in the North East Asian region.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2015

Objective: The purpose of this paper is to evaluate old and newly designed ammunition boxes from an ergonomic point of view. Background: The ammunition boxes made of wood, which are currently used by the military, have some difficulties such as corrosion and damage of ammunition, environmental pollution, and stock management. Also, damages to the wooden ammunition boxes take place frequently, because soldiers carry them manually. Method: Sixteen participants volunteered to randomly perform lifting, carrying, and side-by-side moving tasks with 4 different old and new boxes, respectively for the ammunitions of 5.56mm, 60mm, 81mm, and 105mm in diameter. The old boxes are made of wood and are currently used in the military, while the new boxes are made of plastics. The joint moments of the elbow, shoulder, back, and knee were measured by using a motion analysis system and force platforms. In addition, an electromyographic system was used to measure the forces of hand and wrist muscles. Results: In most tasks, new boxes caused less joint moments at the elbow and shoulder than old boxes, because the new boxes were lighter and smaller than the old boxes. New boxes also derived less hand and wrist muscle forces due to the provision of fixed hard handles rather than string handles. Conclusion: The ergonomically designed new boxes could reduce the physical stresses of soldiers manually handling ammunitions and be helpful for storage and reuse. Application: This study shows an ergonomic application example for product development and evaluation.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.2
• /
• pp.139-143
• /
• 2017

Finite element analysis was performed for a split-type CFRP bicycle frame, which was designed to apply a compression molding process with carbon fiber prepreg for a conventional bicycle. An epoxy adhesive material for joining the frames was selected by the extent of stress at joint interfaces. The split-type bicycle frame was then formed and its weak parts examined by the boundary conditions according to reliability tests. The results verified the reliability of the bicycle frame after modification of these weak parts. The finished product was manufactured by using this developed split-type bicycle frame.

• Journal of Industrial Convergence
• /
• v.1 no.1
• /
• pp.71-97
• /
• 2003

In this study, the main goal is conduct an empirical research for MNC's(multinational companies) contingency factors and entry modes. Through examining elements of success and limitations of foreign companies in the domestic market, a resulting purpose can be suggested such as developing attractive foreign investment policy. The results in this study are as below. The results from Logistic Regression Analysis there were indications for preference factors for WOS (Wholly Owned Subsidiary). The factors were 'Strategic Motivation', 'Intelligent Property', and 'Market Latent Purchasing Power'. For JV (Joint Venture) there were preferred factors such as 'Degree of Using Product Factors', 'Differential Products Development Ability', and 'Systematic Incentives'. However, this thesis is limited to identifying clear causal relationship between the 'Performance' of foreign investment enterprise which entered WOS or JV and various factors which were suggested in the contingency factors (independent variables).

• Composites Research
• /
• v.31 no.6
• /
• pp.392-397
• /
• 2018

In this study, the development purpose is to replace steel Tie Rod of commercial vehicle to the carbon composite by a braiding process. CFRP tie rod was designed to meet the performance requirements of existing products by designing the cross section of the core for braiding weaving and the structural design of the joint between the core and the carbon fiber. The specimens were fabricated by braiding method and applied to structural analysis through test evaluation. The manufacturing process proceeded from braiding to infusion through post-curing process. The test evaluation of the final product was satisfactorily carried out by sequentially performing tensile test, torsion test, compression test and fatigue test. In addition, the weight of CFRP tie rod could be reduced by about 37% compared to existing products.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.98-115
• /
• 2012

New trend called ubiquitous leads the recent business by standardization and integration. It should be the main issue how to guarantee the integration and accountability on each business, especially in mission critical system which is mainly supported by M2M (Machine to Machine) control mechanism. This study is from the analysis of digital forensics case study that is from the M2M Sensing Control Mechanism problem of the "Imjin River" case in 2009, where a group of family is swept away to death by water due to M2M control error. The ubiquitous surroundings bring the changes in the field of criminal investigation to real time controls such as M2M systems. The needs of digital forensics on M2M control are increasing on every crime scene but we suffer from the lack of control metrics to get this done efficiently. The court asks for more accurately analyzed results accounting high quality product development design. Investigators in the crime scene need real-time analysis against the crime caused by poor quality of mission critical systems. It seems to be every need of Real-Time-Enterprise, so called ubiquitous society on the case. We try to find the efficiency and productivity in discovering non-functional design defects in M2M convergence products focusing on three metrics in study model with quick implementation. Digital forensics system in present status depends on know-how of each investigator and is hard to expect professional analysis on every field. This study set up a hypothesis "Co-working of professional investigators on each field will qualify Performance and Integrity" especially in mission critical system such as M2M and suggests "Online co-work analysis model" to efficiently detect and prevent mission critical errors in advance. At the conclusion, this study proved the statistical research that was surveyed by digital forensics specialists around M2M crime scene cases with quick implementation of dash board.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.4
• /
• pp.77-89
• /
• 2020

Nowadays, urban townhouses are being developed in various forms according to the characteristics of different regions in consideration of the trends of the housing market. Misperceiving the needs of consumers or their characteristics as a house for living, however, they often end up becoming products that are not suitable for urban life or degraded on account of reckless regional development. It is so unfortunate that such trial and error keeps being repeated. Urban townhouses are advantageous because there is no such problem as either invasion of privacy or noise from neighbors, and it is possible to have one's own garden and enlarged parking space, obtain quality of grounding, and plan unique interior and exterior design. They are also equipped with the strengths of apartment houses as well, for example, the efficiency of joint control in crime and disaster prevention or security, architecture of diaphragm walls with the separation of gates, or the planning of common space like a central square or park. Therefore, there is a great chance that they can be developed as the types of urban housing. Accordingly, the purpose of this study is to establish the basic direction of developing housing products right as space for urban life and maximize the roles of urban townhouses. By understanding their spatial as well as functional elements as a house for living, this author aims to provide a guideline for housing product development to realize urban townhouses that can meet consumer needs.