• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.501-508
• /
• 2001

A graph or topographic map can often convey larger amounts of information in a shorter time than ordinary text-based methods. To visualize information precisely it is necessary to collect all the geological information at design stage, but actually it is almost impossible to bore or explore the entire area to gather the required data. So, tunnel engineers have to rely on the judgement of expert from the limited number of the results of exploration and experiment. In this study, several programs are developed to handle the results of geological investigation with various data processing techniques. The results of the typical case study are also presented. For the electric survey, eleven points are chosen at the valley to measure the resistivity using Schlumberger array. The measured data are interpolated in 3-dimensional space by kriging and the distribution of resistivity are visualized to find weak or fractured zone. The correlation length appears to be around 5 to 20 meter in depth. Regression analyses were performed to find a correlation length. No nugget effect is assumed, and the topographic map, geologic formation, fault zone, joint geometry and the distribution of resistivity are successfully visualized by using the proposed technique.

• Journal of Mechanical Science and Technology
• /
• v.20 no.3
• /
• pp.335-344
• /
• 2006

A comprehensive review of through thickness transverse residual stress distributions in a range of as-welded and mechanically bent components made up of a range of steels has been carried out, and simplified generic transverse residual stress profiles for a plate and pipe components have been proposed. The geometries consisted of welded pipe butt joints, T-plate joints, tubular T-joints, tubular Y-joints and a pipe on plate joints as well as cold bent tubes and pipes. The collected data covered a range of engineering steels including ferritic, austenitic, C-Mn and Cr-Mo steels. Measured residual stress data, normalised with respect to the parent material yield stress, has shown a good linear correlation versus the normalised depth of the region containing the residual stress resulting from the welding or cold-bending process. The proposed simplified generic residual stress profiles based on the mean statistical linear fit of all the data provides a reasonably conservative prediction of the stress intensity factors. Whereas the profiles for the assessment procedures are fixed and case specific, the simple bilinear profiles for the residual stresses obtained by shifting the mean and bending stress from the mean regression line have been proposed and validated.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.25-28
• /
• 2012

본 논문에서는 키넥트(Kinect)에서 획득한 깊이 영상의 품질을 향상시키는 기법을 제안한다. 키넥트는 마이크로소프트사에서 출시한 카메라로 깊이 영상과 컬러 영상을 획득 할 수 있다. 하지만 적외선 패턴을 이용한 깊이 영상의 획득 방법의 한계로 인해 객체의 경계 주변으로 홀 및 잡음이 생긴다. 따라서 정확한 깊이 영상을 얻기 위해서는 깊이 영상의 품질 향상이 필수적이다. 일반적으로 깊이 영상의 홀을 채울 때, 인페인팅(inpainting) 또는 결합형 양방향 필터(joint bilateral filter) 등의 기법을 사용한다. 그러나 이러한 기법들의 경우 한 장의 영상만을 이용하기 때문에 객체 경계 주변의 흔들림 현상을 보정할 수 없다. 제안하는 기법에서는 먼저 수행속도가 빠른 가우시안 필터를 이용하여 경계 주변의 홀을 채운다. 이전 프레임의 컬러 영상을 그레이 영상으로 변환한 다음에 그레이 영상과 깊이 영상의 값의 변화를 분석하여 흔들림 화소를 찾아 이전 깊이 영상들 중 최대 화소 값으로 변환함으로써 깊이 영상의 경계 흔들림 현상을 줄일 수 있다. 실험을 통해 제안하는 기법이 기존의 방법들 보다 우수하다는 것을 확인하였다.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.59-59
• /
• 2002

Sn-Ag-Cu solder is known as most competitive in many kinds of Pb-free solders. In this study, effects of solderability with plated layers such as Cu, Cu/Sn, Cu/Ni and Cu/Ni/Au were investigated. Sn-3.5Ag-0.7Cu solder balls were reflowed in commercial reflow machine (peak temp. : 250℃ and conveyer speed : 0.6m/min). In wetting test, immersion speed was 5mm/sec., immersion time 5sec., immersion depth 4mm and temperature of solder bath was 250℃. Wettability of Sn-3.5Ag-0.7Cu on Cu, Cu/Sn (5㎛), Cu/Ni (5㎛), and Cu/Ni/Au (5㎛/500Å) layers was investigated. Cu/Ni/Au layer had the best wettability as zero cross time and equilibrium force, and the measured values were 0.93 sec and 7mN, respectively. Surface tension of Sn-3.5Ag-0.7Cu solder turmed out to be 0.52N/m. The thickness of IMC is reduced in the order of Cu, Cu/Sn, Cu/Mi and Cu/Ni/Au coated layer. Shear strength of Cu/Ni, Cu/Sn and Cu was around 560gf but Cu/Ni/Au was 370gf.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.116-123
• /
• 2008

In the fossil power plant, the reliability of the components which consist of the many welded parts depends on the quality of welding. The residual stress is occurred by the heat flux of high temperature during weld process. This decreases the mechanical properties as the strength of fatigue and fracture or causes the stress corrosion cracking and fatigue fracture. Especially, the accidents due to the residual stress occurred at the weld parts of high-temperature and high-pressure pipes and steam headers. Also, the residual stress of the welded part in the recently constructed power plants has been brought into relief as the cause of various accidents. The aim of this study is the measurement of the residual stress using the x-ray diffraction method. The merits of this are more accurate and applicable than other methods. The materials used for the study is P92 steel for the use of high temperature pipe on super critical condition. The variables of tests are the post-weld heat treatment, the surface roughness and the depth from the original surface. The test results were analyzed by the distributed characteristics of the full width at half maximum intensity (FWHM) in x-ray diffraction intensity curve and by the relation of hardness with FWHM.

• Journal of Welding and Joining
• /
• v.20 no.6
• /
• pp.783-788
• /
• 2002

Sn-Ag-Cu solder is known as most competitive in many kinds of Pb-free solders. In this study, effects of solderability with plated layers such as Cu, Cu/Sn, Cu/Ni and Cu/Ni/Au were investigated. Sn-3.5Ag-0.7Cu solder balls were reflowed in commercial reflow machine (peak temp.:$250^{\circ}C$and conveyer speed:0.6m/min). In wetting test, immersion speed was 5mm/sec., immersion time 5sec., immersion depth 4mm and temperature of solder bath was $250^{\circ}C$. Wettability of Sn-3.5Ag-0.7Cu on Cu, Cu/Sn ($5\mu\textrm{m}$), Cu/Ni ($5\mu\textrm{m}$), and Cu/Ni/Au ($5\mu\textrm{m}/500{\AA}$) layers was investigated. Cu/Ni/Au layer had the best wettability as zero cross time and equilibrium force, and the measured values were 0.93 sec and 7mN, respectively. Surface tension of Sn-3.5Ag-0.7Cu solder turmed out to be 0.52N/m. The thickness of IMC is reduced in the order of Cu, Cu/Sn, Cu/Mi and Cu/Ni/Au coated layer. Shear strength of Cu/Ni, Cu/Sn and Cu was around 560gf but Cu/Ni/Au was 370gf.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.8 no.2
• /
• pp.57-66
• /
• 2013

Objectives : The present study examines indications and treatment techniques of Chuna manual therapy. Methods : We searched the clinical studies on Chuna manual therapy through 5 korean web databases, 2 journals.(key word 'chuna') After selecting appropriate clinical studies(Bongchuna, massage, side effect, contraindication are excepted), we analyzed them according to diseases, Chuna techniques, type of clinical trials. Results : 101 studies are selected and analyzed. They studied about cervical(26%), thoracic(12%), lumbar (29%)spinal disorders, temporomandibular joint disorders(4%), pelvic region disorders(4%), upper(6%), lower extremity(5%) disorders and other diseases(15%). Spinal disorders are studied frequently. Mild techniques like supine position both hand cervical spine flexion distraction, JS supine position cervical spine distraction, flexion distraction technique are used more frequently than adjustment by thrust. Conclusions : We have to enhance education and training about techniques that are frequently used and studied. Research and improvement of infrequently used techniques are needed. In-depth research about side effects and contraindication is needed. Highquality clinical research and systematic review should be needed to prove the therapeutic effect of Chuna treatment.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.31 no.1
• /
• pp.147-154
• /
• 2018

Objectives: This study aims to examine the improvement against facial wrinkles after needle-embedding therapy. Methods: The study participants were 10 women treated with needle-embedding therapy in the Korean Medical Clinic from September, 2011 to August, 2014. The subjects were treated every ten days for twenty days, totally three times, and the result of treatment was evaluated five times, such as pre-treatment, after each treatments, one month and two months later of the last treatment with ARAMO-SG. Results: 1. Depth and range of facial wrinkles, facial skin pore test, and sensitivity test were visibly improved after needle-embedding therapy and follow-up compared pre-treatment (p<0.05). 2. The significant improvements in facial skin texture test was not observed and sustained until the follow-up measurement at 2 months. 3. Any adverse reaction related to needle-embedding therapy did not happen. Conclusions: This study suggests that needle-embedding therapy can improve facial wrinkles. The positive results of this study support the requirement for additional research investigating the efficacy of needle-embedding therapy in women.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.63-70
• /
• 2002

In tunnel construction, the information on the rock quality and the location of fault or fracture are crucial for economical design of support pattern and for safe construction of the tunnel. The grade of rock is commonly estimated through the observation with the naked eye of recovered cores in drilling or from physical parameters obtained by their laboratory test. Since drilling cost is quite expensive and terrains of planned sites for tunnel construction are rough in many cases, however, only limited information could be provided by core drilling Electrical resistivity and EM surveys may be a clue to get over this difficulty. Thus we have investigated electrical resistivity and EM field data providing regional Information of the rock Quality and delineating fault and fracture over a rough terrain. In this paper, we present some case histories using electrical resistivity and EM survey for the site investigation of tunnel construction. Through electrical resistivity and EM survey, the range and depth of coal seam was clearly estimated, cavities were detected in limestone area, and weak zones such as joint, fault and fracture have been delineated.

• Journal of the Korean Society for Library and Information Science
• /
• v.53 no.4
• /
• pp.399-418
• /
• 2019

In accordance with the recent expansion of collection operation of independent publications through public libraries, this study conducted a status analysis on independent publications collection in public libraries and in-depth interviews with staff in charge of independent publications in order to suggest ways to effectively manage independent publications. As a result, it was deduced that the measures needed for effective management of independent publications are construction of joint cataloging system for building and sharing independent publications catalog in public libraries; platform for collecting various information of independent publications; support for ISBN, ISSN, CIP issuance of independent publications; and improvement of distribution system.