• Tribology and Lubricants
• /
• 제23권2호
• /
• pp.61-65
• /
• 2007

It is very important to connect machinery and maintain it. This is usually done by bolt joint. There are two ways in connecting the bolt joint : the angle method and the torque method. The torque method is a method that let the clamping force maintain. The underhead of the bolt's head and the thread friction are the main influences. This study focuses on how the clamping farce and friction coefficient change under the condition in vibrating the underhead of the bolt's head part. As a result, under vibration condition, we found out that the clamping farce increases, while the friction coefficient decreases.

• 대한족부족관절학회지
• /
• 제10권2호
• /
• pp.279-283
• /
• 2006

Irreducible dislocation of great toe interphalangeal joint with incarcerated sesamoid is a rare condition, with only a few cases reported in literature. We describe two cases of dislocation of interphalangeal joint which were diagnosed by plain radiographs and three dimensional computed tomography (3D-CT) and successfully treated with open reduction without excision of sesamoid through dorsal approach along with literature pertinent to this condition.

• Journal of Welding and Joining
• /
• 제15권6호
• /
• pp.32-40
• /
• 1997

Solid state diffusion bonding is the joining process performed by creep and diffusion, which is accelerated by heating below melting temperature and proper pressing, in vacuum or shielding gas atmosphere. By this process we can obtain sufficient joint which can't be expected from the fusion welding. For Ti-6Al-4V alloy, the optimum solid state diffusion bonding condition and mechanical properties of the joint were found, and micro void morphology at bond interface was observed by SEM. The results of tensile test showed sufficient joint, whose mechanical properties are similar to that of base metal. 850$^{\circ}$C, 3MPa is considered as the optimum bonding condition. Void morphology at interface is long and flat at the initial stage. As the percentage of bonded area increases, however, small and round voids are found. Variation of void shape can be explained as follows. As for the void shrinkage mechanism, at the initial stage, power law creep is the dominant, but diffusion mechanism is dominant when the percentage of bonded area is increased.

• 대한안전경영과학회지
• /
• 제5권1호
• /
• pp.129-141
• /
• 2003

In this thesis, using the 400 series ferrite stainless steel such as 434LD$_2$ which are furter excellent then the existing ferric products in mechanical characteristics, and experiment has been conducted on corrosion resistance of sensor ring. The results are following. 1. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition. 2. 434LD$_2$ ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. thus the decreasing production process has been obtained. 3. As hardness value of $H_{RB}$ 80 and tensile test, 434LD$_2$ ferrite stainless steel with show a good endurance when it is combined to constant velocity joint (c/v joint), and has a good hardness properties endurable to sand and pebble impact.

• 대한수학회논문집
• /
• 제25권3호
• /
• pp.343-347
• /
• 2010

In this paper we study the connection between 2-primal rings, (S,1)-rings and related conditions. And we investigate some condition which is the special case of pseudo symmetric. We also study the condition (KJ) which is given by J. Y. Kim and H. L. Jin. We introduce some condition and we prove that our condition is equivalent to the condition (KJ) when it is an (S,1)-ring.

• 터널과지하공간
• /
• 제16권4호
• /
• pp.313-325
• /
• 2006

본 연구에서는 이방성 암반의 방향성 및 측압조건이 터널 변형거동에 미치는 영향을 조사하기 위하여 서로 다른 15가지 이방성 터널 모형에 대해 축소모형실험을 실시하였다. 이를 위해 모래 석고 물의 중량비를 달리한 모형재료에 대한 물성 실험을 통하여 모형재료의 특성을 연구하였다. 대부분의 이방성 터널 모형은 응력이 집중되는 곳에서 전단파괴 현상을 보였으며 절리면을 따라 미끄러짐이 발생하여 절리면의 경사 방향이 터널 변형거동에 큰 영향을 미친 것으로 나타났다. 절리 경사가 $30^{\circ}$보다 작은 모형에서는 반팽창현상이 두드러지게 나타났으며 절리경사가 $50^{\circ}$인 모형은 측압조건에 관계없이 수직 및 수평 내공변위가 가장 작게 나타나 실험된 모형중에서 가장 안정적인 모형으로 판단된다. 또한 모형터널의 파괴 및 변형양상은 측압계수 조건에 따라 매우 상이하게 나타났다.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.115-124
• /
• 2007

The purpose of this study was to analyze the kinematics variables of upper limb joint during forehand stroke by swings patterns. Eight high school tennis players were chosen for the study, who have never been injured for last six months, in Busan. They performed horizontal swing and vertical swing that it was done each five consecutive trial in the condition of square, semi-open and open stance. It was filmed by 6 video camera and used with 3-dimensional motion analyzer system. The following kinematic variables were analyzed in relation to angle of joint(shoulder, elbow and wrist joint). The conclusion were as follow: 1. The angle of right shoulder joint represented all event that both swing were shown similar pattern in swing type and stance pattern. 2. All event in the angle of elbow joint had consistent with that except E2, horizontal and vertical swings in square stance. 3. All event in the angle of wrist joint was show to similar pattern except E2, horizontal and vertical swing in open stance.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.128-134
• /
• 2009

This paper aims to design a variable-stiffness type economical safety joint for service robots. The safety joint was designed to have a passive shock absorbing mechanism for protecting human from a catastrophic collision under service condition of robots. A simple mechanism composed of two action disks for switching the load transfer, a spring and a screw for pre-load was proposed. In order to evaluate the performance of the safety joint a testing platform which can carry out the static and impact tests was also designed and fabricated. From the test results, the designed safety joint was proved to have a variable load-carrying capacity and about 42% impact absorption capacity with simple manipulation of the control screw.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.757-762
• /
• 2007

The lining segment which is the main structure of the shield tunnel consists of joints, not continua. Past international and domestic design data have been commonly used for design practices without specific verification about the structural analysis model, design load, and affection of the soil constant of the lining segment. In this study, the propriety is estimated through the comparison between analytical solution and numerical solution for segment analysis and design models of the shield tunnel which is being used internationally and domestically. As a result, the full. circumferential beam jointed spring model (1R-S0) is suggested by considering aspects of convenient use, application to field condition, and accuracy of analysis result. With suggested model, the parameter analysis was conducted for joint stiffness, ground rigidity, joint distribution, and joint number.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.479-484
• /
• 2004

For the rational design of welded joint, it is needed to assess repeatedly the fatigue life of the joint with various dimensions and welding conditions. In this paper, an automation of repeated process of fatigue life assessment for welded cruciform joint was studied. The process is related to stress analysis in vicinity of weld-toe and fatigue life assessment based on analyzed stress distribution. With the change of design condition including dimensions and/or welding heat input, the above two works have to be performed. Using the commercial tool for system integration, ModelCenter, an automation of the repeated process for welded cruciform joint based on 2D modeling was achieved. In this automation system, data exchanges between programs regardless of commercial or in-house one work well, and parametric studies for optimal design can be performed.