• Rapid Communication in Photoscience
• /
• 제3권3호
• /
• pp.53-55
• /
• 2014

The shade avoidance syndrome is a morphological and physiological response when plants are exposed to shade. Recent work in Arabidopsis had begun to define the molecular components of the shade avoidance syndrome in dicotyledonous model plant. However, little is known about the shade avoidance response networks in agriculturally important monocotyledon crops such as rice. Here, we found that the degree of bending at the lamina joint is inversely proportional to the R:FR ratio. To elucidate which phytochrome is involved in this response, we did lamina joint inclination assay with the rice phytochrome-deficient mutants (osphyA, osphyB, and osphyC) and the wild type plants. Whereas the osphyA and osphyC knockout mutants bent at the lamina joint in the far-red rich condition as the wild type plants, the osphyB knockout mutants no longer bent at the lamina joint in the far-red rich condition. These results suggest that PHYB acts as a sole photoreceptor in the lamina joint inclination response in rice.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.253-255
• /
• 2002

Since a butt Joint is smaller than a lap type joint, it is expected to have smaller AC losses. The butt joint is produced by the diffusion bonding of the contacting surface under pressured and heated condition. It is important to find robust joining conditions, because butt joint has small contact area and has the shape by which the quality of bonding is hard to be checked. In this research, the loading pressure is considered as the joining parameter to find optimum joining condition. The DC resistance of the joint may be changed by the surface pressure during joining process, because the superconducting strands near the contact surface are failed by large plastic deformation. The range from 10 MPa to 18 MPa is expected optimum surface pressure in the conditions of 1 hour heating time and $750^{\circ}C$ temperature in the vacuum furnace.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.265-270
• /
• 2007

The potential and step voltage distribution around low voltage joint-box cover were simulated with the variation of resistivity of water, depth of submerged water and point of leakage current. The potential distribution is very high gradient around low voltage joint-box, this condition is very dangerous states.

• 한국임상수의학회지
• /
• 제18권3호
• /
• pp.243-248
• /
• 2001

Radiographic findings of degenerative joint disease (DJD) in the coxofemoral joints were studied in 108 dogs referred to Veterinary Medical Teaching Hospital, College of Veterinary Medicine, Seoul National University. Radiographic findings were identified with a extended ventrodorsal projection. Clinical signs such as pain in the affected joint, exercise intolerance, lameness, crepitation on flexion and extension of the joint and decreased range of motion, were shown in 40% and radiographic changes of bilateral coxofemoral joints were identified in 69% of a group of dogs. There are no sex predilections. Thirty-seven dogs were diagnosed as canine hip dysplasia (CHD; 10 cases), avascular necrosis of the femoral head (Legg-Calves-Perthes disease [LCPD]; 12 cases), fracture of the acetabulum (1 case), luxation(10 cases) and subluxation (15 cases), however, luxation and subluxation were identified in 11 dogs affected with CHD and LCPD. Causes of DJD in others (71case) were not identified. Radio-graphic findings identified included osteophyte formation at the attachment of the joint capsule (70%), sclerosis of the subchondral bone of the cranial acetabular edge (47%), remodeling of the femoral head (34%), thickening of the femoral neck(31%), perichondral osteophyte formation (31%), joint laxity (30%) and so on. All of the dogs diagnosed as CHD were large breed such as Retriever, Germain Shepherd, and Weimaraner and their age was under 1 year. This condition occurred bilaterally in 70% of affected animals. Dogs diagnosed as LCPD were young (under 1 year), small breed dogs. The incidence of LCPD is greater in Yorkshire Terrier, Miniature Pinscher and Poodle. This condition occurred unilaterally in 67% of affected animals. Clinical signs of dogs with unknown cause were shown in 15% and this condition occurred bilaterally in 75% of affected animals. Radiographic findings varied with patient's age and breed, however, the most common finding was osteophyte formation at the attachment of the joint capsule.

• 터널과지하공간
• /
• 제5권1호
• /
• pp.1-10
• /
• 1995

The behavior of a jointed rock mass depends mainly on the geometrical and mechanical properties of joints. The failure mode of a rock mass and kinematics of rock blocks are governed by the orientation, spacing, and persistence of joints. The mechanical properties such as dilation angle, shear strength, maximum closure, strength of asperities and friction coeffiient play important roles on the stability and deformation of the rock mass. The normal and shear behaviour of a joint are coupled due to dilation, and the joint deformation depends also on the boundary conditions such as stiffness conditons. In this paper, the joint constitutive law including the dilatant behaviour of a joint is numerically modelled using the edge-to-edge contact logic in distinct element method. Also, presented is the method to quantify the input parameters used in the joint law. The results from uniaxial compression and direct shear tests using the numeical model of the single joint were compared to the analytic results from them. The boundary effect on the behaviour of a joint is verified by comparing the results of direct shear test under constant stress boundary condition with those under constant stiffness boundary condition. The numerical model developed is applied to a complex jointed rock mass to examine its performance and to evaluate the effect of joint dilation on tunnel stability.

• 소음진동
• /
• 제11권1호
• /
• pp.125-131
• /
• 2001

There is a clearance between the parts of a machine due to design tolerance, manufacturing error, wear, looseness, or misalignment. If the clearance is large, the vibration and noise of the machine is generally large. Therefore, the analysis on the nitration and noise of a machine can tell the clearance of the machine, which reveals the condition of the machine, i.e., the existence of faults and the safety of the machine. The investigation of this kind of research should be on the basis of experimental results. A link mechanism with a clearance at a joint between the coupler and locker is made for the investigation of the condition monitoring of a machine due to clearance. The vibration and sound are measured from the link driving system during the operation. The signals are clarified using line enhancement technique. The noise removed signals are used to develop the dynamic model of the system for a model based fault diagnosis. Also this study showed that the clarified signals can be used for the calculation of the joint forces between the coupler and rocker and for the correlation between the vibration and sound levels and the clearance sizes.

• 소성∙가공
• /
• 제26권6호
• /
• pp.348-355
• /
• 2017

In recent years, dissimilar materials such as aluminum, magnesium, titanium, and advanced high strength steel are widely used in automotive body due to environment concerns and fuel consumption. Therefore, joining technology is important for assembling components made of dissimilar materials. In this study, friction stir hole clinching (FSHC) was proposed as a new mechanical joining method to join dissimilar materials. This process stirs and heats the upper sheet, forming mechanical interlocking with the lower sheet. The feasibility of this FSHC process was verified by comparing cross-section of joint in FSHC and hole clinching process under the same processing condition. Taguchi method was also applied to the FSHC process to estimate the effect of process parameters on joint strength and obtain optimal combination of process parameters. Joint strength of FSHC with optimal process condition was compared to that of FSHC with initial process condition as well as that of hole clinching with optimal process condition. Results showed that the FSHC process was useful for joining dissimilar materials, even if the formability of materials was low.

• 한국안전학회지
• /
• 제17권2호
• /
• pp.16-21
• /
• 2002

At present the Polyethylene piping, on supporting LNG is widely used because of it's disposition which are anti-corrosion flexible and so on. However, it has a few kinds of risk which are the possibility of piping leak, the character of easily corroded and so on. For giving solution, this study is intended to experiment the intension of the PE pipe after melted and when it is melting, the condition which are temperature and pressure is changed. the melting condition in temperature and pressure is adapted identically. After melting, it's joint is tested as intension. The result is that the effect of temperature in intension is more effective than pressure. In $210^{\circ}C$, $20kg/cm^{2}$ condition, the melting intension has the highest. Compare to the Butt melting joint and the Saddle melting joint, the former was $214kg/cm^{2}$ and the latter was $50kg/cm^{2}(bead\;2{\sim}3mm)$ and $73kg/cm^{2}(bead\;5{\sim}7mm)$. It means that the Butt melting method has more intensive than saddle. Consequently, the result shows that the liability and safety when pipe melting method is used will improve in pipe installation.

• 대한족부족관절학회지
• /
• 제23권2호
• /
• pp.67-70
• /
• 2019

Septic arthritis is a serious medical condition that can lead to significant complications if misdiagnosed or mismanaged. A rare case of a 1st metatarso-phalangeal joint septic arthritis in a native joint is presented in a patient with no significant risk factors. A 41-year-old patient was referred by his general practitioner owing to ongoing pain and swelling over his native 1st metatarso-phalangeal joint with difficulty on weightbearing for three months. After a series of investigations, including blood tests and a foot magnetic resonance imaging, which were inconclusive, the patient was led to the operating theatre for sampling and washout of his joint. The samples taken in the theatres revealed septic arthritis with Streptococcus mitis as the causative microorganism. The patient was treated with six weeks of oral antibiotics with a good functional outcome. This case report illuminates this rare condition and makes foot and ankle surgeons aware of its existence. A high suspicion for this condition can prevent misdiagnosis and mismanagement.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.126-131
• /
• 2022

The number of joint disease patients is increasing every year. Currently, the most CPM(Continuous Passive Motion) equipment uses expensive imported equipment, and one CPM equipment is designed to be used only in one joint, medical personnel or hospitals who are the main users of the medical equipment need to have several types of CPMs for joint rehabilitation. To solve this problem, this paper designed a multifunctional joint medical equipment that enables rehabilitation of knee, shoulder, and elbow joints in one CPM equipment and includes general, intensive, and adaptive exercise functions for effective treatment according to the patient's condition. The patient's condition was diagnosed using a load cell and a current sensor. In this paper, effective rehabilitation methods were presented and high reliability and precision of medical equipment was confirmed through experiments using potentiometer, encoder, and PI controller.