• PNF and Movement
• /
• 제6권1호
• /
• pp.53-60
• /
• 2008

Purpose : To describes the important aspects of knee joint movement and function used when applying PNF technique to the lower limb. Method : The knee was a very important roles in the lower limb movement and ambulation. This study summarizes the physiologic movement of knee to the PNF lower extremity patterns. Result : The tibiofemoral joint is usually described as a modified hinge joint with flexion-extension and axial rotation by two degrees of freedom movement. These arthrokinematics are a result of the geometry of the joints and the tension produced in the ligamentous structures. The patellofemoral joint is a sellar joint between the patella and the femur. Stability of the patellofemoral joint is dependent on the passive and dynamic restraints around the knee. In a normal knee the ligaments are inelastic and maintain a constant length as the knee flexes and extends, helping to control rolling, gliding and translation of the joint motions. Conclusions : It is important to remember that small alterations in joint alignment can result in significant alterations in patellofemoral joint stresses and that changes in the mechanics of the patellofemoral joint can also result in changes in the tibiofemoral compartments. Successful treatment requires the physical therapist to understand and apply these arthrokinematic concepts. When applied to PNF low extremity patterns, understanding of these mechanical concepts can maximize patient function while minimizing the risk for further symptoms or injury.

• 국제물리치료학회지
• /
• 제9권4호
• /
• pp.1642-1650
• /
• 2018

The purpose of this study was to identify the effect of proprioceptive neuromuscular facilitation (PNF) stretching exercise and joint mobilization on ankle joint range of motion (ROM), plantar pressure, and balance in subjects with stroke. Thirty patients (n=30) were organized into three groups, each of which received different treatments: PNF stretching (n=10), joint mobilization (n=10), and joint mobilization and PNF stretching combined (n=10). Each group received three exercise sessions per week for four weeks. The ankle ROM was measured using a goniometer, and plantar pressure and balance ability were measured using BioResque static posturography. In comparison within each group, the joint mobilization group and the joint mobilization with PNF stretching group showed significant improvements in ankle ROM, plantar pressure, and balance ability (p<.05). In comparison between the groups, a statistically significant difference was found in SECS change between the PNF stretching group, joint mobilization group and the joint mobilization with PNF stretching group. This study found demonstrates that the joint mobilization and joint mobilization with the PNF stretching methods were effective in improving ankle ROM, plantar pressure, and balance ability in stroke patients.

• Structural Engineering and Mechanics
• /
• 제78권5호
• /
• pp.623-635
• /
• 2021

Previous studies have suggested the maximum experimental story shear force of beam-column joint frame does not reach its theoretical value due to beam-column joint failure when the column-to-beam moment capacity ratio was close to 1.0. It was also pointed out that under a certain amount of axial force, an axial collapse and a sudden decrease of lateral load-carrying capacity may occur at the joint. Although increasing joint transverse reinforcement could improve the lateral load-carrying capacity and axial load-carrying capacity of beam-column joint frame, the conditions considering varying axial force were still not well investigated. For this purpose, 7 full-scale specimens with no-axial force and 14 half-scale specimens with varying axial force are designed and subjected to static loading tests. Comparing the experimental results of the two types of specimens, it has indicated that introducing the varying axial force leads to a reduction of the required joint transverse reinforcement ratio which can avoid the beam-column joint failure. For specimens with varying axial force, to prevent beam-column joint failure and axial collapse, the lower limit of joint transverse reinforcement ratio is acquired when given a column-to-beam moment capacity ratio.

• Journal of Welding and Joining
• /
• 제13권2호
• /
• pp.106-114
• /
• 1995

The characteristics of adhesive bonded joint of steels for automobile were investigated. Shear and tear strength were tested and analyzed for the joints of cold rolled steel sheets bonded with three kinds of epoxy and urethane based adhesive. The results showed that the tensile shear strength and the tear strength of adhesive joint were affected by the shape of adhesive joint such as the length and width of adhesive joint. The thickness of adhesive layer was very important factor affecting the bonding strength. The shear strength increased with decrease of the thickness of adhesive layer, while the tear strength decreased as the thickness of adhesive layer decreased. In comparison with the strength of spot welded joint, the shear strength of adhesive Joint was higher than that of spot welded joint, but the tear strength of adhesive Joint was lower than that of spot welded joint.

• Archives of Reconstructive Microsurgery
• /
• 제9권2호
• /
• pp.154-157
• /
• 2000

Author report a case of double metatarso-phalangeal joint transplantation to the elbow joint in the 31 years old female patient who have large bone defect associated with skin and soft tissue defect. The donor joints were second and third metatarso-phalangeal joint as double joint transfer fashion to enhance stability of graft. The graft based on dorsalis pedis vessel to anastomosed with radial artery of recipient site. The result is unsatisfactory because of long lasting lateral instability of reconstructed elbow joint in spite of 40 degree flexion motion and fair axial stability. We can conclude that joints from foot can not be an effective donor for biologic joint arthroplasty of elbow joint even though double metatarso-phalangeal joint were harvested.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.133-140
• /
• 1993

In this paper, we prpose a method for tracking optimally a spatial trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint euqations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation result of a flexible planar manipulator is presented.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.143-150
• /
• 1998

The evaluation of joint fatigue strength of light weight materials for electrical vehicle body has been performed through single lap joint tests with the design parameters such as joint style, adherend, bonding overlap length and bonding thickness. Fatigue strength was evaluated through 5-Hz, tension-tension, load controlled test with the stress ratio zero value. It is experimentally observed that fatigue strength of joint increases for the increase of overlap length. The combinations of Al-Al and Al-FRP adherends show that fatigue strength of joint is hardly changed for the increase of bonding thickness, but FRP-FRP adherend specimen shows that fatigue strength of joint increases after decreases for the increase of bonding thickness. Al-Al adherend specimen has much higher fatigue length than Al-FRP and FRP-FRP adherend specimens. Riveting at adgesive bonded joint gives little effect on fatigue strength.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.9-16
• /
• 1998

The joint characteristics are necessary to be determined in the early stage of the vehicle body design. Researches on identification of joints in a vehicle body have been performed until the recent year. In this study, the joint characteristics of vehicle struct- ure were expressed as condensed forms from the full joint stiffness and mass matrix. The condensed joint stiffness and mass matrix were applied to typical T-type and Edge-type joints, and the usefulness was confirmed. In addition, those were applied to center pillar and full vehicle body to validate the practical application.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.56-65
• /
• 1998

The bonding strength evaluation of the light weight materials for an electrical vehicle has been performed through the T-peel joint test in which the design paramete- rs such as joint style, adherend type, adherend thickness, adhesive thickness, and adhesive type are considered. It is experimentally observed that the peel strength of joint increases with the increase of the adherend thickness. With the increase of the adhesive thickness, however, the peel strength of joint increases a little. Aluminum-FRP adherend combination shows such higher peel strength than that of Aluminum-Aluminum adherend combination. For the adhesive bonded joint, the results of FEM analysis agree with those of experiment. The adhesive bonded joint reinfored with a rivet gives higher peel strength than that of the joint without rivet.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.174-175
• /
• 2018

본 논문은 헬스케어의 한 분야로 엄지손가락에 대한 손허리손가락관절굽힘과 손가락뼈사이관절굽힘에 대하여 알아보도록 한다. 손허리손가락관절굽힘은 엄지 손허리 손가락 관절을 구부리는 것을 말하고 손가락뼈사이관절굽힘은 엄지손가락뼈사이 관절을 구부리는 것을 말한다. 관절을 구부릴 때 일정한 정해진 각도에 미달하거나 통증을 느끼면 이상이 발생한 것이다. 또한 엄지손가락 관절의 이상에 대한 예방법과 치료법도 제시하였다.