• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1724-1726
• /
• 1997

In this paper, a superposed discharge type ozonizer(CISDO) has been designed and manufactured. CISDO is equipped with three electrodes(central electrode, internal electrode and external electrode), and it is composed of two gaps. Ozone is generated by overlapping silent discharge, which is respectively came from two gaps. This paper describes the following two characteristics : (1) The characteristics of discharge with variation of output voltage of AC H.V source, quality of supplied gas and discharge voltage (2) The characteristics of ozone generation with variation of quality of supplied gas. discharge power, operating number.

• Carbon letters
• /
• 제16권2호
• /
• pp.93-100
• /
• 2015

Surface modified carbon felts were utilized as an electrode for the removal of inorganic ions from seawater. The surfaces of the carbon felts were chemically modified by alkaline and acidic solutions, respectively. The potassium hydroxide (KOH) modified carbon felt exhibited high Brunauer-Emmett-Teller (BET) surface areas and large pore volume, and oxygen-containing functional groups were increased during KOH chemical modification. However, the BET surface area significantly decreased by nitric acid ($HNO_3$) chemical modification due to severe chemical dissolution of the pore structure. The capability of electrosorption by an electrical double-layer and the efficiency of capacitive deionization (CDI) thus showed the greatest enhancement by chemical KOH modification due to the appropriate increase of carboxyl and hydroxyl functional groups and the enlargement of the specific surface area.

• 수산해양교육연구
• /
• 제23권3호
• /
• pp.351-360
• /
• 2011

In order to reduce the casualties of fishing boats, the author analyzed the fishing boat accident on the 412 cases in Korean maritime safety tribunal for the 2005~2009, and then studied the relation between the weather element and the accidents. According to this studies, the occurring ratio of sea casualty for fishing boat in fog weather was appeared 1 boat per 1.6 days. It means that the restricted visibility condition gives the most influence on the fishing boat accident. The casualties in winter season from November to next January occurred 139(33.7%), and small boats less than 50tons broke out more casualties with 68.4%. From this we can find that small fishing boats are very deeply affected on the sea weather condition. According to the boat types for fishing the casualty of jig boat was ranked first, and collision accident account for first with 77.9% for the types of casualties. As mentioned above, most sea casualties for small fishing boats were resulted from the human factors such as poor watch keeping in invisibility and the bad sea condition, it is necessary for navigation operators and the manager to take more attention to the meteorological factors.

• 한국주조공학회지
• /
• 제35권6호
• /
• pp.163-169
• /
• 2015

This study reports the influence of gadolinium (Gd) addition on mechanical and corrosion properties of 2205 duplex stainless steel. In all alloys produced, regardless of the initial Gd content, Gd-based inclusions were well distributed in the duplex stainless steel matrix. As the Gd content increased from 0 wt% to 0.19 wt%, the ultimate tensile strength and hardness of the alloy increased from 630 MPa to 977 MPa and from 57 to 61, respectively, while elastic modulus, tensile elongation and impact energy of the alloy decreased. The critical crevice temperatures of Alloy1, Alloy2 and Alloy3 were $20^{\circ}C$, $20^{\circ}C$ and $15^{\circ}C$, respectively.

• 한국수소및신에너지학회논문집
• /
• 제10권2호
• /
• pp.91-99
• /
• 1999

Mg, Ni, graphite chips을 원료로 하여 기계적 합금화를 수행한 결과, 분위기 수소와 carbon의 불안정한 유기화합물이 합성되어 사료 획득시에 격렬한 발화 현상을 야기하는 것으로 생각되며 수소 분위기에서 45Mg+55Ni chips을 합성한 후 graphite를 첨가하여 Ar 분위기에서 합금화한 결과 Mg-Ni-C가 합성되었다. 개선된 공정에서 획득한 시료는 623K에서 약 4.9 wt%의 수소를 저장하지만 안정한 Mg-Ni-C-H의 합성여부와 수소화 특성등은 보다 면밀한 물리화학적 검토가 필요할 것으로 사료된다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.273-276
• /
• 2008

본 연구에서는 Air 및 Oxygen을 원료가스 사용하여 원통형 오존발생기의 오존생성농도를 측정하여 오존발생량 및 오존생성 수율을 계산하였다. 오존발생기에서 발생된 오존을 오존접촉조내의 원수 30[L]에 기상 오존주입량 3[g/$m^3$]를 투입하여 오존접촉 시간의 변화에 따른 오존접촉 실험 6일 후의 녹조 특성을 조사하였다. 오존생성특성 결과 원료가스가 Air인 경우, 최대오존생성 농도는 유량 1.0[$\ell$/min] 에서 5.5[g/$m^3$], 최대오존발생량은 유량 5.0[$\ell$/min] 에서 1.0[g/h]를 얻을 수 있었고, 원료가스가 Oxygen인 경우, 최대오존생성농도는 유량 1.0[$\ell$/min] 에서 51.5[g/$m^3$], 최대오존발생량은 유량 4.0[$\ell$/min] 에서 4.5[g/h]를 얻을 수 있었다. 오존접촉 실험 6일 후에서 원수와 오존접촉시간 1분에서 녹조 현상을 관찰할 수 있었고 나머지 오존접촉시간에 따른 오존 처리 수에서는 녹조 생성을 관찰할 수 없었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2141-2143
• /
• 2000

In this paper, high concentration yield multi-discharge type ozonizer (MDO) of new discharge type using superposed silent discharge was designed and manufactured, MDO can be consisted with 3 kind of multi discharge type ozonizer (MDO) in accordance with power supply method that supplying power, which has 180[$^{\circ}$] phase difference, to 3 electrodes and double gap. At the moment, discharge characteristics and ozone generation characteristics of each MDO were investigated in accordance with quantity of supplied gas, the number of MDO, and the shapes of each MDO. In result, ozone generation characteristics of 17185[ppm] and 783[g/kWh] were obtained, and when ozone of 17185 [ppm] was in contact with dyeing water waste, decolorization characteristics was excellent, so it confirmed that MDO could be used as water environment improvement facility.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.640-647
• /
• 2004

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. The unloading compliance method and the DCPD(Direct Current Potential Drop) method have been widely used for measuring the crack length and the extension for a standard specimen fracture resistance curve test. However it is difficult to apply the unloading compliance method to a real pipe fracture resistance curve test. The objective of this paper is to propose the calibration equation between the normalized crack length and the normalized electric potential, and to apply to pipe fracture experiments. For these, finite element analyses were performed with various current input locations and crack front configurations. Also the 4-point bending jig was manufactured for a pipe test and the DCPD method was used to measure crack extensions and crack lengths for a pipe test. The calculated crack length by the DCPD method agreed with the measured crack length within 5% error.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.20-27
• /
• 2010

In this study, we improved problems in the existing product by PARKER and developed the swivel valve tube couplers that can be produced by a low price in Korea. The major development was that a modulized production method was implemented by introducing a part assembling method that uses a cocking jig, and the production cost was reduced by operating the production process more simply than that of PARKER. Also, it was possible to avoid the patient registered by PARKER through the differences in the number of grooving processes and the type of o-ring. In the results of the rotation test by varying its application angle after installing it to a vehicle, it was verified that the structure proposed in this study can endure the eccentric torque and transformation pressure for various angles that have been considered as the problem in the existing fixed tube couplers. In addition, the structure was developed to adopt the problem that represents differences in the installation position of an air tank or the length and direction of hoses according to the type of vehicles produced in vehicle manufacturers. Furthermore, it was possible to verify that the product developed in this study was more excellent than that of PARKER through comparing the performance according to the Federal Motor Vehicle Safety Standard.

• 한국생산제조학회지
• /
• 제21권1호
• /
• pp.15-20
• /
• 2012

The authenticity of bank note is threatened by increasing a counterfeit note with development of the information industry, recently. The importance of counterfeit discrimination is stressed, but there is a limits to popularization. Because usually, the existing counterfeit discriminator uses invisible ray zone like UV, IR, etc. The purpose of this paper is the construction of counterfeit discrimination system for \50,000 won bills. This system is used optical fiber sensor with excellent confidence as well as easy way of using in wave length of a visible ray zone. The light was altered by lightening optical fiber sensor to particular part of bank notes in order displacing response of optical fiber sensor. The experiment was processed with data of 100 bank notes on manufacture optical fiber, probe, jig. As a result, the discrimination conuterfeit was verified when the experiment was processing with hologram or CSI on the bank notes with three kinds of color printer.