• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.635-641
• /
• 1994

Recently, Improving the energy efficiency of a pneumatic system and reducing the consumption of compressed air were a concern of scholars at domestic and abroad. The using fields of a pneumatic system are widely used in factory automation of manufacturing line, chemical factories with explosiveness danger and petroleum industries etc. In particular, Pneumatic cylinder is applied to feeding work of workpiece, jig tools and press mechanism, reciprocation and rotary motion with rack and pinion. In this study, The experimental apparatus consisted to pneumatic cylinder, dual supply pressure regulator and solenoid valve. The dual supply pressure regulator connected to outlet port of solenoid valve. The supply pressure (4.5kgf/cm$\^$2/) of compressed air goes into the rodless chamber 1 to drive the pistion rod forward which is named working stage. The supply pressure(2kgf/cm$\^$2/) of compressed air goes into the rod chamber 2 to drive the piston rod backward which is named no-working stage. Accordingly, The research results of this study can be obtained to Energy-Saving Effects of the compressed air about 35%.

• Archives of Reconstructive Microsurgery
• /
• 제17권1호
• /
• pp.51-54
• /
• 2008

We experienced a case of 49-year-old male patient with amputated two fingers preserved in Soju (Korean traditional liquor, a kind of alcoholic beverages). The amputation level of the two fingers was at the distal interphalangeal joint. The Soju was not an adequate physiologic solution for preserving the amputated tissues. Even though arterial anastomosis was successful, there was no venous drainage visible in the operative field. On the first day after the initial operation, we succeeded in the anastomosis of one vein in one of the two amputated fingers. This was 12 hours after arterial anastomosis was carried out. But no venous dranage was visible in the other finger. In spite of a salvage procedure sustained with external bleeding for 7 days, this replanted fingertip eventually fell into necrosis.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.17-19
• /
• 2005

To achieve high productivity of assembly hull blocks, it is important to predict welding deformations accurately and to apply these data to the production planning. In the deformation analysis of hull block, simplified methods (elastic analysis) such as inherent method, equivalent loading method and local & global approach are usually used instead of thermal-elastic-plastic analysis because of calculating time and cost. To be much more practical, these simplified methods should consider gravity effect of plate and contact condition between the plate and the positioning jig. In this research, using finite element method, practical predicting method for the welding deformation of the curved hull blocks with considering welding sequence, gravity effect and contact condition is proposed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.1257-1261
• /
• 2004

국내 농업용수 관리기관인 농업기반공사에서 농업용수의 관개효율 개선을 포함한 효율적인 물관리 연구를 위해 운영중인 경기 평택의 이동 농업용수지구를 대상으로 실제 공급량과 수정 Penman식으로 구한 필요수량과의 비교를 통하여 물이용 효율에 대한 분석을 실시하였다. 2003년은 년간 강수량이 평년에 비하여 많았으며 강우횟수도 많아 관개 필요수량이 평년에 비하여 적었으며 이로 인하여 물이용 효율 또한 낮게 나타났다. 관개구역별 필요수량 산정량과 실제 공급량 비교를 통한 물이용 효율 분석은 3개 저수지 관개구역에 대해 실시하였다. 관개구역별 공급량과 필요수량 비교는 미산저수지 관개지구의 경우 수정 Penman식으로 구한 필요수량의 $90\%$를 실제 관개구역에 공급하였고 용덕저수지 관개구역의 경우 $170\%$를 공급하였고 이동저수지 관개구역의 경우 $220\%$를 공급하여 $90\%\~220\%$의 범위를 보였다. 전체 관개구역의 평균은 필요수량 산정량의 $160\%$를 실제 관개구역에 공급한 것으로 나타났다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.121-126
• /
• 2005

This paper describes the attributes, performance and development status of a high performance capacitive torque sensor intended for use in a electric power steering (EPS) system. The EPS system is composed of torque sensor, ECU, motor, gears and etc. Among the elements, torque sensor in the steering column is one of the core technologies. The new capacitive torque sensor in this paper is developed differently from working principle and mechanical structure compare to extant torque sensors in market and patent. Based on the result of numerical analysis, a experimental equipment is made which is composed of a test jig and a capacitive sensor and validity of numerical analysis and feasibility of the torque sensor are verified.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.15-21
• /
• 2009

The anisotropic mechanical properties were measured for the three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate. In tensile and flexural tests, axial and edge type specimens failed by pull-out of warp and fill yarns, respectively. In contrast, the thickness type specimens failed by adhesive failure process. Longitudinal cracking occurred in several of the edge type specimens during tensile test. That cracking caused pop-in in the stress-strain curve. Defects induced by improper coupon machining caused that cracking.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (2)
• /
• pp.514-516
• /
• 2005

CBD(Component Based Development)는 장기간에 걸쳐 발전된 소프트웨어 개발의 한 형태이며, 이미 표준화되거나 공인되지 않았지만 실제로 모든 기업들은 컴포넌트를 나름대로 제작하거나 이미 잘 개발되어진 컴포넌트를 재사용하여 자체 프로젝트에 재활용하므로써 최소의 개발비로 표준화를 추구하는 한편 최대의 기능과 신속한 개발로 소프트웨어의 품질과 생산성 향상을 도모하고 있다. 본 논문에서는 레거시 시스템을 활용하여 컴포넌트로 되어 있지 않은 프로그램을 컴포넌트화 함은 물론 기존 애플리케이션에 존재하는 컴포넌트를 래핑하여 재사용 가능한 서비스를 생성, 재공하기 위한 CBD 기반의 회계처리 응용 시스템을 설계 및 구현한다. 제안된 회계처리 응용 시스템 APAS(Accounting Process Application System) 모델은 시스템 구축 개발 기간의 단축과 관리 및 유지보수를 쉽게 하여 업무의 효율성을 높이고, 레거시 시스템을 재활용하여 신규 개발시 우려되는 위험도를 낮추어 소프트웨어 생산성 제고 효과도 얻을 수 있다.

• 한국안전학회지
• /
• 제21권1호
• /
• pp.59-64
• /
• 2006

In this study, adsorption characteristics of PCBs on granular activated carbon were experimentally investigated in a batch reactor and in a fixed bed reactor. Granular activated carbon removed above 98.4% of initial concentration, 1000mg/L, of PCBs. It was estabilished that the adsorption equilibrium of PCBs on granular activated carbon was more successfully fitted by Freundlich isotherm equation in the concentration range from 1 to 1000mg/L. Because Freundlich parameter, ${\beta}$ is 0.346, removall treatment of PCBs by activated carbon accounts for the fact that toxicity reduction can be achieved through this process. Appearance time of breakthrough curve is faster with the increase flow rate and inflow concentration of liquid. The utility of granular activated carbon is enhanced with the increase of bed height and with the decrease of inflow rate.

• 대한세포병리학회지
• /
• 제13권2호
• /
• pp.74-77
• /
• 2002

Lymphoepithelial carcinoma, also known as malignant lymphoepithelial lesion or lymphoepithelioma, is a rare tumor in salivary glands. Lymphoepithelial carcinoma has a characteristic histological findings comprising irregularly-shaped nests of malignant epithelial cells within a lymphocyte-rich stroma, occasionally forming lymphoid follicles. We recently experienced a case of fine needle aspiration cytology (FNAC) of lymphoepithelial carcinoma of parotid gland in a 61-year-old male. The FNAC yielded a hypercellular smear of many irregular clusters of malignant epithelial cells in the background of lymphoid stroma.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.1-7
• /
• 2013

The present paper relates to a development of the Gear Detection Sensor for automotive manual transmission. To detect air gap from control finger to detecting zone of sensor based on non-contacted method, permanent magnet and linear type Hall IC are mounted in this sensor. Control finger is machined to 3 step heights to detect 3 gear stages such as In-Gear, Normal and Rear. After conducting actual experimentation based on exclusive Jig and FEM, it is described to consider possibility for automotive application of Gear Detection Sensor.