• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.137-145
• /
• 2004

Limestone zone in korea have been distributed to diagonal line so that it is wide from the Gangwondo to the Jeonlanamdo. The limestone cavity and fractured zone were formed by chemical weathering. Limestone cavity and fractured zone was reinforced with cemented milk(w/c=60%)by high pressure jet grouting by tripple -pipe to establish bridge foundation on the ground condition like limestone cavity. To analyze property of limestone and solid of cement milk(w/c=65%), mixed solid of cement, core NX size in the limestone cavity and fractured zone and compressive strength. Seismic tomograpy exploration was pcrforn1cd to analyze deformation modulus of limestone. The analysis suggests that deformation modulus of limestone has effect on uniaxial compressive strength, seismic velocity, seismic elasticity modulus. Average static elasticity modulus of limestone is $5.08{\times}10^5kgf/cm^2$, cement and coal mixed solid is $0.25{\times}10^5kgf/cm^2$, $0.095{\times}10^5kgf/cm^2$. Average seismic velocity of limestone is 5.240m/sec, cement and coal mixed solid is 2,211.3m/sec, 1,447.5m/sec. Average uniaxial compressive strength of limestone was $1,221.3kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $125.22kgf/cm^2$, $35kgf/cm^2$ each other. Average friction angle of limestone was $49.14^{\circ}$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $38.39^{\circ}, 25.83^{\circ}$ each other. Average cohesion of limestone was $137.7kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $23.5kgf/cm^2$, $15.5kgf/cm^2$ each other. Average deformation modulus of limestone was $2.84{\times}10^5kgf/cm^2$ and limestone specimen mixed with cement milk and solid of cement milk mixed with coal were $0.4{\times}10^5kgf/cm^2, 0.12{\times}10^5kgf/cm^2$ each other. It was analyzed that the elasticity and uniaxial compressive strength, seismic velocity of solid of cement milk mixed limestone pieces and coal had an highly interrelation regardless of existence of limestones pieces and coal but it had shown that limestones had an lower interrelation. In case of field seismic velocity and deformation of limestone, SIC solid of cement milk mixed with coal and limestone pieces had an highly interrelation.

• 기술발표회
• /
• 통권2006호
• /
• pp.279-291
• /
• 2006

This study shows decision-making process for selection of cutoff wall on a wastewater treatment project. There are 10 different cut-off wall methods So, we examine the site to gather information for find appropriate methods. After using that information, 10 cutoff wall methods are reviewed for analysis. Through brainstorming, four alternatives are selected for design VE item. Following the standard VE process, we established performance criteria and evaluated function score(F) using questionnaire. The questionnaires, brainstorming and AHP method for weighting on performance criteria and evaluate function score increased the reliability of this selection process. Water Jet method, one of four methods, has the best function score(F=92.71) and the lease construction cost(as cost index 1,000). The value score also highest as 92.7, so we select the method. The result is value innovation type In addition, the authors try to calculate the environmental burden in selection process using LCA. We cannot conduct the full LCA as defined ISO, so perform Simple LCA In LCA result, the cut-off grouting has the least environmental burden as index 9.09E+01 and Water Jet method has following as the second. To selection best method to specific area and purpose, design VE/LCG process used as useful tool and it is needed to develop integrated method that evaluate VEILCC and LCA as one-set process.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2425-2433
• /
• 2011

1980년대에 싱가포르에 도입된 심층혼합공법 DSM (Deep Soil Mixing )은 시멘트 슬러리를 지중에 주입시킨 후 이를 원지반 연약토와 교반시킴으로써 견고한 흙-시멘트 기둥을 형성시켜 지반을 보강하는 지반개량공법으로 최근 깊은 굴착을 위한 가설 흙막이 공사에 제트그라우팅의 대안으로 많이 사용되고 있다. 본 논문에서는 OPC (Original Portland Cement)와 PBFC (Portland Blast Furnace Slag Cement)를 이용한 실내배합시험 결과, DSM 시험시공, 그리고 계측을 포함한 본 시공 결과를 분석하였으며, 이 결과는 향후 비슷한 지반에서의 DSM적용 시 참고자료로 사용될 수 있을 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1140-1147
• /
• 2010

To find the soil plug of steel piles shaped by jet grouting, 4 blocks of cement milk with cube of 1.2m were made. 4 open-ended steel piles on the blocks were rested. The inner end part of 2 the piles was not reinforced. Cement milk 65%(SIG-1) and 100%(RJP-1) were filled into the block and height of 4.2 times of inner the pile diameter respectively. And the other the piles were welded 2 steel ring. The filling of the cement milk was an equal method as before(SIG-2 and RJP-2). Also the strain gauges were installed and the static pile load tests were done at the piles all. As a result, list in great order for effect of soil plug was (1)SIG-1, (2)SIG-2, (3)RJP-1, (4)RJP-2. This is because of strength and filling height of cement milk. And the higher the strength is, the greater the confining coefficient is.

• 한국지반환경공학회 논문집
• /
• 제5권3호
• /
• pp.51-60
• /
• 2004

Soil Nailing 공법은 국내의 경우 1993년 처음으로 적용된 이후 최근에는 가시설용에서 영구용으로 확대되어 적용되고 있다. Soil Nailing 공법에 있어서 강성 전면벽체는 지반의 변형을 억제하는 역할을 하며, 인접한 건물 또는 지하구조물 등의 손상을 최소화 하기 위한 목적으로 사용되고 있다. 국내의 경우 도심지에 적용되고 있는 Soil Nailing 벽체는 지반의 이완을 최소화하기 위해 H-Pile+토류판, 쉬트파일, SCW 및 JSP 등의 흙막이 벽체와 함께 종종 사용되고 있다. 그러나 전면벽체의 강성을 고려하기 위한 적당한 설계방법에 대한 제시가 없는 실정이어서 안전측에서 벽체의 강성에 의한 구속효과를 무시하여 왔다. 본 연구에서는 Soil Nailing 벽체의 전체 안정성에 벽체의 강성이 미치는 영향을 알아보기 위해 다양한 실내모형실험이 수행되었으며, 전단강도감소기법과 같은 수치해석기법을 이용한 매개변수변화연구도 시도되었다. 매개변수변화연구에서는 전면벽체의 강성의 영향을 알아보기 위해 콘크리트 전면벽체의 두께를 변화시켰다.

• Geomechanics and Engineering
• /
• 제30권6호
• /
• pp.565-577
• /
• 2022

In this study, a series of three-dimensional numerical parametric study was conducted to investigate deformation mechanisms of an existing box culvert due to an adjacent multi-propped basement excavation in clays. Field measurements from an excavation case history are first used to calibrate a baseline Hardening Soil Small Strain (HS-small) model, which is subsequently adopted for parametric study. Results indicate that the basement-box culvert interaction along the basement centerline can be considered as a plane strain condition when the length of excavation (L) reaches 14 H_e (i.e., final excavation depth). If a plane strain condition (i.e., L/H_e=12.0) is assumed for analyzing the basement-box culvert interaction of a short excavation (i.e., L/H_e=2.0), the maximum settlement and horizontal movement of the box culvert are overestimated significantly by up to 15.7 and 5.1 times, respectively. It is also found that the deformation of box culvert can be greatly affected by the basement excavation if the distance between the box culvert and retaining wall is less than 1.5 H_e. The induced deformation in the box culvert can be dramatically reduced by improving the ground inside the excavation or implementing other precautionary measures. For example, by adding jet grouting columns within the basement and installing an isolation wall behind the retaining structures, the maximum settlements of box culvert are shown to reduce by 37.2% and 13.4%, respectively.

• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.491-505
• /
• 2023

The practical usage of underground space and demand for vehicular tunnels necessitate the construction of non-circular wide rectangular tunnels. However, constructing large tunnels in soft clayey soil conditions with no ground improvement can lead to excessive ground deformations and collapse. In recent years, in situ ground improvement techniques such as jet grouting and deep cement mixing are often utilized to perform cement-stabilisation around the tunnel boundary to prevent large deformations and failure. This paper discusses the stability characteristics and failure behaviour of a wide rectangular tunnel in cement-treated soft clays. First, the plane strain finite element model is developed and validated with the results of centrifuge model tests available in the past literature. The critical tunnel support pressures computed from the numerical study are found to be in good agreement with those of centrifuge model tests. The influence of varying strength and thickness of improved soil surround, and cover depth are studied on the stability and failure modes of a rectangular tunnel. It is observed that the failure behaviour of the tunnel in improved soil surround depends on the ratio of the strength of improved soil surround to the strength of surrounding soil, i.e., q_ui/q_us, rather than just q_ui. For low q_ui/q_us ratios,the stability increases with the cover; however, for the high strength improved soil surrounds with q_ui >> q_us, the stability decreases with the cover. The failure chart, modified stability equation, and stability chart are also proposed as preliminary design guidelines for constructing rectangular tunnels in the improved soil surrounded by soft clays.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.563-573
• /
• 2024

In this study, various countermeasures used to mitigate tunnel deformations due to nearby multi-propped basement excavation in soft clay are explored by three-dimensional numerical analyses. Field measurements are used to calibrate the numerical model and model parameters. Since concrete slabs can constrain soil and retaining wall movements, tunnel movements reach the maximum value when soils are excavated to the formation level of basement. Deformation shapes of an existing tunnel due to adjacent basement excavation are greatly affected by relative position between tunnel and basement. When the tunnel is located above or far below the formation level of basement, it elongates downward-toward or upward-toward the basement, respectively. It is found that tunnel movements concentrate in a triangular zone with a width of 2 H_e (i.e., final excavation depth) and a depth of 1 D (i.e., tunnel diameter) above or 1 D below the formation level of basement. By increasing retaining wall thickness from 0.4 m to 0.9 m, tunnel movements decrease by up to 56.7%. Moreover, tunnel movements are reduced by up to 80.7% and 61.3%, respectively, when the entire depth and width of soil within basement are reinforced. Installation of isolation wall can greatly reduce tunnel movements due to adjacent basement excavation, especially for tunnel with a shallow burial depth. The effectiveness of isolation wall to reduce tunnel movement is negligible unless the wall reaches the level of tunnel invert.

• 지질공학
• /
• 제26권4호
• /
• pp.485-495
• /
• 2016

본 연구에서는 방파제 하부지반을 저치환율 재료로 보강 및 개량하기 위한 치환율과 재하중 방치기간을 확률론적 최적화 기법을 이용하여 분석하였다. 해석에 필요한 확률변수의 불확실성을 최소화하기 위하여 사전자료를 활용한 베이지안 갱신결과 최대 39.8% 포인트까지 불확실성이 감소하였고, 특히 사전함수의 표본수가 더 많은 구간의 감소폭이 컸다. 치환율 결정을 위하여 저치환율 단면 중 15~40% 범위에서 일계신뢰도법 및 몬테카를로 시뮬레이션 방법에 의해 해석한 결과 목표파괴확률을 만족하는 치환율은 심층고결처리 및 쇄석다짐말뚝 구간에서 각각 20% 및 25% 이상으로 나타났다. 치환율에 대한 최적화를 위하여 생애주기비용 분석을 실시한 결과 목표파괴확률을 만족하는 범위 내에서 최적 치환율이 산정되었으며, 두 구간에서 각각 20% 및 30%가 가장 경제적인 것으로 결정되었다. 재하중의 방치기간에 대한 확률론적 해석결과 3개월 이상인 경우 모두 목표파괴확률을 만족하는 것으로 나타났다.