• 대한치과교정학회:학술대회논문집
• /
• 대한치과교정학회 2004년도 제37회 학술대회
• /
• pp.38.1-38.1
• /
• 2004

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권2호
• /
• pp.95-101
• /
• 2003

The purpose of this study was to evaluate the patterns of skeletal changes of proximal and distal segments after one jaw surgery and two jaw surgery with posterior impaction using SSRO on mandible in order to determine the skeletal origin of relapse and compare the stability of surgical methods in anterior open bite. The points and lines from lateral cephalometrics were measured before, after surgery, and at least 6-month follow up period. And then, the positional change of the proximal and distal segment were evaluated respectively. The results obtained were as follows; In cases of two jaw surgery, the results were stabler because they had less relapse factors. In cases of one jaw surgery, the value of APD were increased but it didn't relapse to the original value. Both of proximal and distal segments were responsible for the relapse tendency. But in one jaw surgery, the rotation of proximal segment was more responsible, and in two jaw surgery, the rotation of distal segment was.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.559-565
• /
• 2006

The aim of this study was to evaluate the amount and interrelationship of the soft and hard tissue changes after simultaneous maxillary clockwise rotation and mandibular setback surgery in skeletal class III malocclusion. The sample comprised of 16 adult patients who had anteroposterior skeletal discrepancy. These patients had received presurgical orthodontic treatment and surgical treatment which consisted of Le fort I Osteotomy and bilateral saggital split ramus osteotomy. The presurgical (T1) and postsurgical (T2) lateral cephalograms were evaluated. The computerized statistical analysis was carried out with SPSS/PC program. The results demonstrated a decrease in the vertical dimension in the soft and hard tissue. The nasolabial angle was increased and the mentolabial angle was decreased. The results showed also many statistically significant correlations(p<0.05). The lower lip closely followed the skeletal movement of the B- point in the horizontal plane. The double jaw rotation surgery can afford a good solution to solve the problems of class III malocclusion cases.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권6호
• /
• pp.628-634
• /
• 2008

The purpose of this study is to examine reproducibility of operation plan and 3-dimentional jaw movement patterns by comparing jaw position of STO with post-operative jaw position. Twenty patients with class III dental and skeletal malocclusion who were treated with Le-Fort I osteotomy and B-SSRO were reviewed. Lateral cephalometric radiographs were taken within two weeks before operation and two days after operation. Cephalometric radiographs were compared and analyzed with orthognathic computer program '$V-Ceph^{TM}$'. Post-operative maxillary advancement was insufficient compared to maxillary advancement through STO. Post-operative setback movement was over compared to mandibular setback movement through STO. But statistically this is not significant. Maxillary vertical location is insignificant on the whole. Especially post-operative maxillary clockwise rotation is significant compared to maxillary rotation through STO. Post-operative maxillary clockwise rotation tendency is generally observed in all patients. So surgeons and staffs must consider this tendency when operation plan is established ans operation is being performed. Using intra or extra oral marking points, face bow, and bite plate will make exact surgery possible.

• The Journal of Advanced Prosthodontics
• /
• 제10권6호
• /
• pp.401-407
• /
• 2018

PURPOSE. When performing an occlusal procedure, it is recommended that the patient should be sitting straight with the head in a natural position. An inappropriate mandibular position caused by an incorrect occlusal record registration or occlusal adjustment can result in damaged teeth and cause functional disorders in muscles and temporomandibular joints. The purpose of this study was to clarify the influence of horizontal cephalic rotation on mandibular position by investigating the three-dimensional positions of condylar and incisal points. MATERIALS AND METHODS. A three-dimensional jaw movement measurement device with six degrees of freedom (the WinJaw System) was used to measure condylar and incisal points. The subjects were asked to sit straight with the head in a natural position. The subjects were then instructed to rotate their head horizontally $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, $40^{\circ}$, $50^{\circ}$and $60^{\circ}$ in the right or left direction. RESULTS. The results indicated that horizontal cephalic rotation made the condyle on the rotating side shift forward, downward, and toward the inside, and the condyle on the counter rotating side shift backward, upward, and toward the outside. Significant differences in deviations were found for angles of rotation higher than $20^{\circ}$. The incisal point shifted in the forward and counterrotating directions, and significant differences were found for angles of rotation higher than $20^{\circ}$. CONCLUSION. The mandibular position was altered by horizontal cephalic rotations of more than $20^{\circ}$. It is essential to consider the possibility of deviation of the mandibular position during occlusal procedures.

• 한국의학물리학회지:의학물리
• /
• 제9권3호
• /
• pp.127-136
• /
• 1998

전자포탈영상장치 (EPID)를 의료용 선형가속기의 QC/QA로 이용할 수 있게 하고 이 시스템의 유용성을 평가할 목적으로, 의료용 선형가속기의 기하학적 QC/QA 항목 중 빛-광자선 조사면 일치, 콜리메이터 회전축, 캔트리 회전축 등을 분석할 수 있고 임상응용에의 유용성을 실용적으로 수행할 수 있는 GUI(Graphic User Interface) 방식의 소프트웨어를 개발하였다. 상용 전자포탈영상장치에서 수집한 영상을 네트워크를 통해 수집하고, 이 영상을 조작할 수 있는 OQuE (On-line quality assurance system using electronic portal imaging) 시스템을 PC 상에서 구현하였다. EPID는 Portal Vision(Varian, USA)을 사용하였고, 시스템의 유용성 검증을 위해 CL/2100/CD (Varian, USA)의 의료용 선형가속기를 이용하여 기하학적 QC/QA 성능과 임상응용에의 유용성을 평가하였다. 빛-광자선 조사면 일치를 ～1mm의 정밀ㆍ정확도로 평가할 수 있었다. 콜리메이터 또는 갠트리, 카우치 회전축 역시 4 개의 방사선 방향에 대한 영상을 중첩시켜서 중첩된 영상이 이루는 교점을 분석하여 구할 수 있었다. 빛-광자선 조사면 일치는 조사면별로 각각 영상을 얻고, 이들의 확대 영상과 중첩 영상을 보면서 중력장 중심 (center of gravity) 을 계산한 결과 5$\times$5 $cm^2$에서 0.2 mm, l0$\times$10, 15$\times$15, 20$\times$20 $cm^2$에서 0.3 mm내에 들어옴을 알 수 있었고 Upper Jaw 회전축은 $\pm$0.2 mm, Lower Jaw 회전축은 $\pm$0.1mm, 갠트리 회전축은 앞뒤 방향으로 $\pm$0.3 mm, 좌우 방향으로 $\pm$0.7 mm 내에 들어옴을 알 수 있었다. 카우치 회전측은 $\pm$0.2 mm 이내에 들어옴을 알 수 있었다. 영상수집 시간은 필름에 비해 훨씬 짧았으며, 그 분석 또한 객관적이고 정량적으로 이룰 수 있어서 전자포탈영상장치가 의료용 선형가속기의 QC/QA 도구로서 적당함을 알 수 있었다. 그리고 기준영 상과 포탈영상의 필드경계와 해부학적 모양을 분석함으로써 임상응용에의 유용성을 평가할 수 있었다. 적절한 사용자 편의를 보완하면 이 소프트웨어는 의료용 선형가속기의 기하학적인 성능평가 및 임상에 적극 활용할 수 있음을 알 수 있었다.

• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.541-558
• /
• 2014

This paper proposes a new design of shape memory alloy (SMA) wire actuated gripper for open mode operation. SMA can generate smooth muscle movements during actuation which make them potentially good contenders in designing grippers. The principle of the shape memory alloy gripper is to convert the linear displacement of the SMA wire actuator into the angular displacement of the gripping jaw. Steady state analysis is performed to design the wire diameter of the bias spring for a known SMA wire. The gripper is designed to open about an angle of $22.5^{\circ}$ when actuated using pulsating electric current from a constant current source. The safe operating power range of the gripper is determined and verified theoretically. Experimental evaluation for the uncontrolled gripper showed a rotation of $19.97^{\circ}$. Forced cooling techniques were employed to speed up the cooling process. The gripper is simple and robust in design (single movable jaw), easy to fabricate, low cost, and exhibits wide handling capabilities like longer object handling time and handling wide sizes of objects with minimum utilization of power since power is required only to grasp and release operations.

• 대한치과교정학회지
• /
• 제50권3호
• /
• pp.170-180
• /
• 2020

Objective: To compare short- and long-term dentoalveolar, skeletal, and rotational changes evaluated by Björk's structural method of superimposition between children with Class II malocclusion treated by functional appliances and untreated matched controls. Methods: Seventy-nine prepubertal or pubertal children (mean age, 11.57 ± 1.40 years) with Class II malocclusion were included. Thirty-four children were treated using an activator with a high-pull headgear (Z-activator), while 28 were treated using an activator without a headgear (E-activator). Seventeen untreated children were included as controls. Lateral cephalograms were obtained before treatment (T1), after functional appliance treatment (T2), and after retention in the postpubertal phase (T3). Changes from T1 to T2 and T1 to T3 were compared between the treated groups and control group using multiple linear regression analysis. Results: Relative to the findings in the control group at T2, the sagittal jaw relationship (subspinale-nasion-pogonion, p < 0.001), maxillary prognathism (sella-nasion-subspinale, p < 0.05), and condylar growth (p < 0.001) exhibited significant improvements in the Z- and E-activator groups, which also showed a significantly increased maxillary incisor retraction (p < 0.001) and decreased overjet (p < 0.001). Only the E-activator group exhibited significant backward rotation of the maxilla at T2 (p < 0.01). The improvements in the sagittal jaw relationship (p < 0.01) and dental relationship (p < 0.001) remained significant at T3. Condylar growth and jaw rotations were not significant at T3. Conclusions: Functional appliance treatment in children with Class II malocclusion can significantly improve the sagittal jaw relationship and dental relationships in the long term.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제35권5호
• /
• pp.316-324
• /
• 2013

This case report describes the treatment of a 23-year-old woman who had lip protrusion with gummy smile and mentalis muscle strain. Orthognathic surgery was performed in conjunction with orthodontics. Minimum dental decompensation was performed with presurgical orthodontics followed by an anterior segmental osteotomy for the majority of dental decompensation. Counterclockwise rotation of the maxillomandibular complex was applied by LeFort I osteotomy, and bilateral sagittal split ramus osteotomies with anterior segmental osteotomy to achieve overall facial balance. The active treatment period was 15 months. Stable occlusion and skeletal relationship were observed after a 10-month follow-up period.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.77-83
• /
• 2013

Orthodontics is a branch of dentistry that is concerned with the study and treatment of malocclusion, which may result from tooth irregularities, disproportionate jaw relationships, or both. Orthodontic devices consist of brackets, archwire connected to each bracket, and bends and hooks for auxiliary functions. Basically, orthodontics involves the interaction of brackets and archwire. It should be noted that uncontrolled tipping can occur due to unwanted movement of the teeth. The bending of an archwire can control the angle of an archwire and the rotation of a tooth. In this study, we predict the relationship between the bending angle of an archwire and the rotation of a tooth using the Kriging interpolation method. Also, we calculate the angle of an archwire that occurs at the minimum value of tooth rotation.