• Journal of Acupuncture Research
• /
• v.41 no.2
• /
• pp.115-120
• /
• 2024

Background: Migraine is a common disabling headache that affects every aspect of a person's life. Auricular acupuncture is a cost-effective treatment modality for the management of painful neurological conditions. Previous studies have shown the beneficial effects of a combination of ear points in the management of migraines. However, no studies have evaluated the efficacy of a single auricular point (i.e., sympathetic point) in migraine. Thus, this study evaluated the efficacy of sympathetic points on pain intensity and depression levels in patients with migraine. Methods: In this randomized controlled study, 100 patients with migraine aged 18-45 years were randomly divided into either an auricular acupuncture group (AAG) (n = 50) or a placebo control group (PCG) (n = 50). The AAG underwent needling at the sympathetic point (an auricular acupuncture point), whereas the PCG underwent needling at a non-acupuncture point for 20 minutes daily for 7 days. Assessments were performed before and after the intervention using a 6-item headache impact test (HIT-6) and Beck depression inventory (BDI) scale. Statistical analyses were performed using SPSS version 16. Results: In within-group analysis, the AAG showed a significant reduction in HIT-6 and BDI, whereas the PCG showed a significant increase in HIT-6 and a significant reduction in BDI. In between-groups analyses, HIT-6 reduced significantly in the AAG compared with that in the PCG, whereas BDI reduced significantly in the PCG compared with that in the AAG. Conclusion: In patients with migraine, needling at the sympathetic point produces a greater reduction in the pain intensity level and lesser reduction in the depression level compared to needling at a non-acupuncture point.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.51-59
• /
• 2005

The aim of this study was to compare the species and biotypes of mutans streptococci isolated from dental plaques sampled from the interfaces between the bracket aid tooth surface and smooth tooth surfaces In orthodontic patients. Dental plaque was collected from the interfaces between brackets aid teeth (test group), and from smooth tooth surfaces distant from brackets by more that 2mm (control group). The dental plaque collected by a sterilized curette was transferred into a vial of 1 X PBS. The sample in the vial was vigorously vortexed for 1 min and plated ou mitis-salivarius bacitracin (MSB) agar plate using cotton tips. The agar plates were incubated at $37^[\circ}C$ in a candle jar for 2 days, and again incubated for 1 more day at anambient temperature Individual colonies were cultured in TH broth at $37^[\circ}C\;CO_2$ incubator. The PCR-RFLP based on dextranase gene was performed for the identification of mutans streptococci at the species-level For biotyping of mutans streptococci, biochemical tests were performed There was no significant difference of the species of mutans streptococci isolated from both test and control groups However, the biotypes of the mutans streptococci isolated from test and control groups were different. These results may offer the basic data to verify the relationship between the mutans streptococci biotype and enamel decalcification or dental caries in orthodontic patients with fixed appliances.

• Journal of Acupuncture Research
• /
• v.35 no.2
• /
• pp.88-94
• /
• 2018

Background: Length of hospitalization for patients with lower back pain sustained in road traffic accidents was assessed clinically. Methods: In total, 170 patients with lower back pain injury sustained in road traffic accidents, were included in the study. They were divided into 2 groups: Group A with a shorter hospitalization period (1-7 days) and Group B with a longer hospitalization period (8-14 days). Each group was treated daily with traditional Korean medicine including: acupuncture, herbal acupuncture, herbal decoction medicine, and chuna treatment. To compare the treatment effects between the 2 groups, health-related quality of life, Oswestry disability index, and numeric rating scale were used. Statistical analysis between the 2 groups was assessed using Chi-square test, independent t test, and paired t test. Results: After hospitalization, Group A and Group B both showed a significant increase in their health-related quality of life scores and significant decreases in Oswestry disability index and numeric rating scale scores. In addition, Group B, with a longer hospitalization period than Group A, showed a significant improvement over Group A in its health-related quality of life and numeric rating scale scores. Conclusion: This study suggests that control of pain caused by lower back injury sustained in a road traffic accident, may be more effectively achieved in patients receiving 8-14 days of hospitalization and traditional Korean medicine treatment, compared to those receiving < 7 days of hospitalization treatment. In the future, more systematic and large-scale studies are needed to ascertain the effects of other variables.

• Journal of Acupuncture Research
• /
• v.35 no.4
• /
• pp.193-199
• /
• 2018

Background: The purpose of this study was to investigate electric moxibustion on patients with back pain caused by road traffic accidents. Methods: This was a retrospective study (n = 112) comparing treatment with Korean medicine combined with electric moxibustion (n = 56), and Korean medicine alone (n = 56). Patient gender, age, Numeric Rating Scale (NRS), Oswestry Disability Index (ODI) and EuroQol-5 Dimension (EQ-5D) was recorded for each group at the time of hospital admission. Mean NRS measured weekly, mean ODI and EQ-5D scores were measured 2 weeks post-treatment, and evaluated by paired sample t test. using the Statistical Program for Social Science v. 25.0 for Windows. An independent, two-sample t test was used to test for a significant difference in the decrement of NRS, ODI and increment EQ-5D scores between groups. Results: NRS scores decreased in both groups after 1 week of treatment (electric moxibustion, from $5.13{\pm}0.79$ to $3.86{\pm}0.67$; Korean medicine alone, from $5.18{\pm}0.92$ to $4.30{\pm}0.94$; both p < 0.001). There was a significantly greater reduction in NRS score in the electric moxibustion group ($1.27{\pm}0.59$) than in the Korean medicine alone group ($0.88{\pm}0.61$; p = 0.001). After 2 weeks of treatment, EQ-5D scores increased significantly in the moxibustion group ($0.19{\pm}0.12$) compared with the Korean medicine alone group ($0.13{\pm}0.20$; p = 0.043). After 2 weeks of treatment, NRS and ODI scores decreased in both groups. EQ-5D increased in both groups. Conclusion: We suggest that electric moxibustion treatment may be effective for reducing early-stage back pain in patients with road traffic accident injuries.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.514-520
• /
• 2014

In this study, the production potential of alternative coagulant ($Al_2(SO_4)_3$ solution) having the identical coagulation activity with respect to the commercial coagulant was investigated. The raw material of alternative coagulant was a spent catalyst including aluminium (waste activated alumina) generated in the manufacturing process of the polymer. The alternative coagulant was produced through a series of processes: 1) intense heat and grinding, 2) chemical polymerization and substitution with $H_2SO_4$ solution, 3) dissolution and dilution and 4) settling and separation. To determine the optimal operating conditions in the lab-scale autoclave and dissolver, the content of $Al_2O_3$ in alternative coagulant was analyzed according to changes of the purity of sulfuric acid, reaction temperature, injection ratio of sulfuric acid and water in the dissolver. The results showed that the alternative coagulant having the $Al_2O_3$ content of 7~8% was produced under the optimal conditions such as $H_2SO_4$ purity of 50%, reaction temperature of $120^{\circ}C$, injection ratio of $H_2SO_4$ of 5 times and injection ratio of water of 2.3 times in dissolver. In order to evaluate the coagulation activity of the alternative coagulant, the Jar-test was conducted to the effluent in aerobic reactor. As a result, in both cases of Al/P mole of 1.5 and 2.0, the coagulation activity of the alternative coagulant was higher than that of the existing commercial coagulant. When the production costs were compared between the alternative and commercial coagulant through economic analysis, the production cost reduction of about 50% was available in the case of the alternative coagulant. In addition, it was identified that the alternative coagulant could be applied at field wastewater treatment plant without environmental problem through ecological toxicity testing.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.151-159
• /
• 2006

In these days, the importance of sludge treatment is emerging due to the London Convention, so this study was conducted to propose the alternatives for the improved sludge treatment on the organic wastewater and sewage sludge with JAR test and settling column equipped with stirrer. The minimum coagulant dosage to earn the optimum sludge settling efficiency resulted from 200mg/l and each critical sludge settling interface showed no distinct difference when PAC was dosed over 200mg/l. Accordingly, Clarification Rate(CR) with 200mg/l dosage was calculated to CR=(Ho-Ht) / Ho=1-0.4=0.6 because the critical sludge settling height stopped at 0.4. The settling velocity of sludge interface was decreased with the increase of MLSS concentration but rather increased with MLSS concentration over 1,000mg/l. This resulted from positive effect of interacted coagulation for floc formation by transfer to the zone of compressed settling when MLSS concentration increased over 1,000mg/l. The settling velocity of sludge interface showed $28.66{\times}10^{-3}/min$ for average settling velocity of sewage sludge which is 6.7 times higher than $4.25{\times}10^{-3}/min$ for average settling velocity of organic wastewater sludge. The increasing rate of CR for organic wastewater activated sludge was higher than that of settling velocity under 200mg/l of PAC dosage but settling velocity was higher than CR over 200mg/l of PAC dosage. However, in case of sewage sludge, the differential rate of CR was low when PAC dosage was increased but the settling velocity was suddenly increased with over 200mg/l dosage. Therefore coagulation effect was more efficient to MLSS settling velocity rather than SS removal effect in the supernatant.

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.715-723
• /
• 2017

Extracellular Polymeric Substances (EPS) in the water environment assemble fine, colloidal particles, such as clays, microorganisms and biomass, in large flocs, which are eventually subject to sedimentation and deposition and determine water/sediment quality and quantity. This study hence aimed to investigate the way that water and colloidal chemistry affects EPS-mediated flocculation of colloidal particles, using a jar-test experiment. Especially, ionic strength, divalent cation and humic substances concentrations were selected as experimental variables in the jar-test experiments, to elucidate their effects on EPS-mediated flocculation. A higher ionic strength increased flocculation capability, reducing electrostatic repulsion between EPS-attached colloidal particles and enhancing particle aggregation. 0.1 M NaCl ionic strength had higher flocculation capability, with 3 times larger floc size and 2.5 times lower suspended solid concentration, than 0.001 M NaCl. Divalent cations, such as $Ca^{2+}$, built divalent cationic bridges between colloidal particles and EPS (i.e., $colloid-Ca^{2+}-EPS$ or $EPS-Ca^{2+}-EPS$) and hence made colloidal particles to build into large, settelable flocs. A small $Ca^{2+}$ concentration enhanced flocculation capability, reducing suspended solid concentration 20 times lower than the initial dosed concentration. However, humic substances, adsorbed on colloidal particles, reduced flocculation, because they blocked EPS adsorption on colloidal particles and increased negative charges and electrostatic repulsion of colloidal particles. Suspended solid concentration in the tests with humic substances remained as high as the initial dosed concentration, indicating stabilization rather than flocculation. Findings about EPS-mediated flocculation in this research will be used for better understanding the fate and transport of colloidal particles in the water environment and for developing the best management practices for water/sediment quality.

• Membrane Journal
• /
• v.22 no.2
• /
• pp.135-141
• /
• 2012

This study was carried out to find the optimum coagulation conditions for ceramic microfiltration process of Y water treatment plant. When pH of raw water from Y Dam was adjusted to 7, the efficiency of coagulation was the best and the optimun dosage of coagulant was 3 mg/L(as $Al_2O_3$) for turbidity of raw water less then 10 NTU in Jar test. In mini module test, the decay rate of specific flux was the lowest when PAC (poly Aluminum Chloride) was used among coagulants and pH was adjusted to 7. The decay rate of specific flux for raw water turbidity of 10~30 NTU was greatly decreased with increase of dosage of coagulant (PAC) while the rate was not significantly decreased for turbidity more than 50 NTU. In conclusion, the optimum dosage of PAC (11% as $Al_2O_3$) was 30 and 50 mg/L for raw water turbidity of less than 10 NTU and more than 50 NTU, respectively. The dosage of PAC should be increased linearly 30 to 50 mg/L depending on raw water turbidity of 10 to 50 NTU.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.1
• /
• pp.103-114
• /
• 2017

A membrane bioreactor by sequentially alternating the inflow and by applying a two-stage coagulation control based on pre-coagulation was evaluated in terms of phosphorus removal efficiency and cost-savings. The MBR consisted of two identical alternative reaction tanks, followed by aerobic, anoxic and membrane tanks, where the wastewater and the internal return sludge alternatively flowed into each alternative reaction tank at every 2 hours. In the batch-operated alternative reaction tank, the initial concentration of nitrate rapidly decreased from 2.3 to 0.4 mg/L for only 20 minutes after stopping the inflow, followed by substantial release of phosphorus up to 4 mg/L under anaerobic condition. Jar test showed that the minimum alum doses to reduce the initial $PO_4$-P below 0.2 mg/L were 2 and 9 mol-Al/mol-P in the wastewater and the activated sludge from the membrane tank, respectively. It implies that a pre-coagulation in influent is more cost-efficient for phosphorus removal than the coagulation in the bioreactor. On the result of NUR test, there were little difference in terms of denitrification rate and contents of readily biodegradable COD between raw wastewater and pre-coagulated wastewater. When adding alum into the aerobic tank, alum doses above 26 mg/L as $Al_2O_3$ caused inhibitory effects on ammonia oxidation. Using the two-stage coagulation control based on pre-coagulation, the P concentration in the MBR effluent was kept below 0.2 mg/L with the alum of 2.7 mg/L as $Al_2O_3$, which was much lower than 5.1~7.4 mg/L as $Al_2O_3$ required for typical wastewater treatment plants. During the long-term operation of MBR, there was no change of the TMP increase rate before and after alum addition.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.80-80
• /
• 2001

제지 공정의 효율적인 운영을 위한 수단으로 보류 및 탈수성의 분석은 매우 중요한 작 업 이 다. 보류 및 탈수 특성 을 평 가하기 위 하여 SR(Shopper-Riegler), CSF(Canadian S Standard Freeness tester) 그리고 원형 수초지기 등의 비난류 상태의 자연탈수 특성 평가 장치와 동적 조건의 감압식 탈수성 분석기 등이 사용되고 있다. 하지만 이것들은 제지 공정 에 보다 더 근접한 탈수 및 보류 특성을 평가하기에는 부족한 점이 있다. 특히 wet-end 첨 가제들의 효능을 보다 정확히 분석하는 것이 불가능하다. 이런 이유로 난류 발생과 감압 탈 수 둥을 유도한 탈수 특성 평가 장치 개발의 필요성이 커지고 있다. R RDA - HSF(Retention Drainage Analyzer- Handsheet Former)는 지료조성, 감압탈수 및 습지의 성형이 자동화되어 보류도와 탈수성, 종이지합 및 강도를 종합 평가 할 수 있는 새 로운 실험실용 초지기이다. 보다 현장에 가까운 초지 조건을 구현하기 위해서 지료의 농도 를 높이고 진공 탈수를 실시함에 따라 기존의 탈수성 분석기나 보류도 측정기의 단점을 보 완하게 되 었다. 본 연 구에 서 는 Canadian Standard Freeness test와 Dynamic Drainage Jar test 및 원 형 수초지기를 활용한 기존의 탈수성, 보류도 분석 결과와 RDA-HSF를 비교하여, 자연 탈수를 이용하는 기존의 탈수 및 보류 설비에 비해 현장 공정을 보다 현실적으로 재현할 수 있는 감압 탈수 초지 설비로서 RDA-HSF의 활용 가능성을 분석하였다. RDA-HSF를 활용한 실험실적 분석을 통해 현장의 상황올 유사하게 재현함에 따라 공정 운영 인자의 변화에 따른 제품의 품질 및 생산효율을 예측할 수 있게 된 바, 보다 효율적 인 공정 관리가 가능할 것으로 기대된다. 안료 입자의 경우 피인쇄체의 표면 공극을 채우고, 비히클의 경우 미세한 공극속으로 침투되어 경화됨으로써 피인쇄체가 지니고 있는 공극량을 감소시커 게 될 것이다. 그리고 피인쇄체의 각종 형태의 공극으로 침투된 잉크의 양에 반비례적으로 피인쇄체의 표변에 잉크가 잔류하게 될 것이다. 따라서 본 연구에서는 여러가지 안료를 사용하여 각각 다른 공극 특성을 지니는 도공지를 제조한 후 이들이 가지는 공극 특성과 잉크의 잔류 거동에 대해 고찰해 보고자 하였다.여 표면 유효층 일부만 오버레이시키며I 주조 및 단조가 불가능한 재료까지도 표면부에 오버레이 시킴으로 서 부품 및 설비의 제조에 있어 재료비의 절감과 제품의 수명이 획기적으로 개선될 수 있다. 그리고 최근에는 도금 빛 용사 둥과 같은 표면처리를 할 경우임의 소재 표면에 도금 및 용 사에 용이한 재료를 오버레이용접시킨 후 표면처리를 함으로써 보다 고품질의 표면층을 얻기위한 시도가 이루어지고 있다. 따라서 국내, 외의 오버레이 용접기술의 적용현황 및 대표적인 적용사례, 오버레이 용접기술 및 용접재료의 개발현황 둥을 중심으로 살펴봄으로서 아직 국내에서는 널리 알려지지 않은 본 기 술의 활용을 넓이고자 한다. within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭제 구간에 유의적인(p<0.05) 차이를 나타내었다.는 담수(淡水)에서 10%o의 해수(海水)로 이주된지 14일(日) 이후에 신장(腎臟)에서 수축된 것으로 나타났다. 30%o의 해수(海水)에 적응(適應)된 틸라피아의 평균 신사구체(腎絲球體)의 면적은 담수(淡水)에 적응된 개체의 면적보다 유의성있게 나타났다. 해수(海水)에 적응(適應