• Journal of Advanced Research in Ocean Engineering
• /
• 제3권4호
• /
• pp.184-192
• /
• 2017

The Korea Offshore Wind Power (KWOP) cooperation is planning to construct offshore wind energy farms with an overall rated power of 2.5 GW along the southwestern coast by 2019. Hitherto, various structural types of support structures for offshore wind turbines have been being proposed, but these structures have lacked economic analysis studies. Therefore, their economical superiority to existing types has been difficult to guarantee. An offshore structure with economic efficiency will have a minimum amount of mobilizing equipment and short offshore construction period because of the application of rapid installation methods. Thus, the development of a new support structure with economic efficiency is generally considered to be necessary. Accordingly, this paper proposes a newly developed and more economical jacket type for the offshore support structure. This study confirmed its structural safety and performance by conducting a structural analysis and eigenvalue analysis. The manufacturing and installation costs were then estimated. As a result, the new jacket type of offshore support structure proposed in this study significantly reduced the manufacturing and installation costs. Therefore, it is expected that the proposed jacket will contribute to reducing construction expenses for new wind power farms and invigorating wind power farm businesses.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.83-88
• /
• 2014

FSI (Fluid Structure Interaction) method, in this study, has been applied to analyzing thermal characteristics of a high speed machine tool spindle system. The spindle is composed of angular contact ceramic ball bearings, a high speed built-in motor, a cooling jacket, and so on. The cooling jacket has three inlets and outlets. Using the FSI method, temperature distributions and thermal displacements of the spindle system were computed considering the heating of the front and rear bearings and the built-in motor. The results computed using the FSI method were compared with those determined by experiment and using the conventional numerical approach. The results determined using the FSI method were similar to those from the conventional numerical approach but showed better agreement with the experimental results. Therefore, it is concluded that the FSI method is useful for analyzing the thermal characteristics of high speed spindles and can be applied to the design of high speed spindles.

• 패션비즈니스
• /
• 제5권4호
• /
• pp.118-126
• /
• 2001

The purpose of this study, which is related with local women's jacket Manufacturing companies in Seoul and Kyeong-Ki areas, is for the research of general problems, badness in those companies, noticing products' quality level, and full solutions of luxurious sewing technology and high quality products. The results of this study are as follows. 1. Most women's jacket manufacturing companies are poor and producing system is on a changing trend to the pair system. 2. A wage level of inspectors are low compared with working experiences and working period is short compared with working experiences. So, the separation rate was high. 3. The inspection form is full style, but some companies are just inspecting samples or frequent check. 4. Insperation method is highly at the rate of self-inspection and head office inspection. There are inspects in their factories and companies, but some companies don't. 5. There are lots of badness styles such as shrinking of fabric, contaminating of product, dying of fabric, pressing. 6. A work standard, workers' technical education, and giving purposes to workers are demanded for avoiding of products badness.

• 복식문화연구
• /
• 제20권2호
• /
• pp.184-194
• /
• 2012

The purpose of this study is twofold: it suggests appropriate sizes in menswear slim-fit jackets according to brand zones and number of buttons, as well as jacket patternmaking methods according to jacket styles by surveying and comparing the overall present status of patternmaking and production for both men's slim-fit and classic-fit jackets. The researcher conducted interviews with patternmakers of sixteen brands with prepared questionnaires. Data were analyzed by descriptive statistics using SPSS 12.0. The results of this study are as follows: first, for the production ratios of jacket style, the jacket styles' respective proportions differ distinctly according to brand zone. Second, for a jacket with the same number of buttons according to brand zone, the size in character-casual brand zone (character casual can be defined as high quality brands producing designer style clothes) is slightly bigger than the men's formal suit. As the number of buttons increases, there are increases in the chest, waist and hip circumference; on the other hand, the front neck width and the distance from the shoulder neck point to the bottom of the lapel both decrease. Furthermore, the amount of wearing ease in the chest, waist, upper arm circumference, and sleeve curve is less in slim-fit jacket styles than in classic-fit jacket styles. Fusible interfacing alone is used in slim-fit jackets, while sew-in interfacing is used in combination with fusible interfacing in classic-fit jackets. This research concludes that when slim-fit men's jackets are manufactured, appropriate patternmaking and manufacturing methods should be considered.

• 복식문화연구
• /
• 제14권1호
• /
• pp.40-47
• /
• 2006

Three-dimensional body scanners were used for years in the clothing manufacturing fields. The 3D body surface provide essential data to draft patterns for mass customization, virtual fit model, and computerized patternmaking systems. This research proposed the methods of drafting patterns for men's jacket by using three dimensional body scan data. Eight male subjects were scanned, the surface data was flattened. The differentials of the flattened body surface and the jacket draft were measured, and analyzed the regressions. To verify the fit of the patterns, the jacket was constructed by the regression formulae and tested by experts. The fit of the jacket were significantly improved rather than a ready-made suit especially the shoulder areas. This means that the methods that we proposed were good to improve the fit of the garments and could be used effectively to implement mass customization strategies in the apparel retail industry.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.691-696
• /
• 2000

Cooling characteristics of cooling jacket for spindle system with built-in motor are studied. Three dimensional model was selected for the analysis of the helical-type cooling jacket. This model includes the estimation on the amount of heat generation from bearing and built-in motor and the thermal characteristic values such as heat flux on the boundary. The temperature distributions are analyzed and the cooling by Nusselt number and total heat transfer coefficient. Numerical results show that stream-wise cross section area and flow rate are important factors for cooling characteristics of cooling jacket.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.570-575
• /
• 2010

This study is regarding development of an index table for antomation of welding process in impeller fabrication. A PLC, which is widely used for automation in industry, was also adopted as a controller for the index table because of it effectiveness, easy maintenance and repair. The index table consists of centering jig, blade jig, workbench, driving system and a controller. A touch screen was also prepaired as a man-machine interface to provide convenience for workers. Water jacket was installed inside the workbench to reduce thermal stress come from the welding. Temperature of the water jacket was kept constant to cool an impeller main plate effectively. The index table developed in this study convinces that it reduces the total welding time by 50% compared with the conventional process without the table.

• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.87-105
• /
• 2012

The purpose of this case study is to demonstrate the effectiveness of the disruptive innovation strategy based on the Resources Process Values(RPV) theory for a successful firm. Disruptive innovations seemed not initially perform well enough to be sold or used successfully in markets. The products and services used disruptive technologies have not been as effective as those used in the established markets. However, they have other attributes such as simplicity, convenience, and low cost, which appeal to a new, small and initially unattractive set in new or low-end applications. The Hyundai Heavy Industries Co.(HHI) performed the Jubail Industrial Harbour Project(JIHP), which built the Open Sea Tanker Terminal(OSTT) in Saudi Arabia, using the disruptive innovation strategy in order to lower the manufacturing cost of the offshore jacket and to complete the project successfully. The HHI developed the design and drawing systems to manufacture the jacket and also developed the HYundai Jacket Analysis System(HYJAS) software to use the structural analysis against stresses from rolling and pitching of the barge while transporting the jacket by sea.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.806-814
• /
• 2011

A solar jacket, which utilizes solar energy for generating electricity, is an example of clothing developed by the fusion of multiple technologies; such fusion of technologies can lead to further developments in the clothing industry and other industries in general. Many research institutes and garment manufacturing companies in Europe and America are developing solar garments; various solar-based products manufactured using solar cells, photovoltaic batteries, etc. are being sold at high prices. The purpose of this study was to investigate the development status of solar garments and their application for generating photovoltaic energy; the study also identified the type of design and upper body clothing preferred by Korean in their early 20s. The survey participants were 188 university students aged between 20 and 25. The design of the proposed six types of solar clothing was evaluated and rated; they were then ranked on the basis of the ratings. A survey on the management of solar garments was conducted, and ratings were assigned according to a 5-point Likert scale, with 5 indicating the strong affirmation. The survey results showed that among the six types of clothing, protective clothing (50%) and sportswear (22%) were more preferable than the others (working clothes (16%), casual clothes (3%), everyday wear(6%), and suits(1%)). Among the six proposed designs, the jumper design (22%) and jean jacket design (21%) were preferred over the others (casual jacket (19%), casual jacket I (15%), classic suit (14%), and climbing jacket (9%)). Factorial analysis of the management of solar garments revealed that the most important factors were the properties of the solar cell and time required for battery charging, and the second important factors were clothing weight and comfort.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.50-55
• /
• 2012

The important problem in high speed spindle is to reduce and minimize the thermal effect by motor and bearing. This paper presents the thermal characteristic analysis for a high speed spindle with and without cooling at the rear part, considering the viscosity and the flow rate of cooling oil. A high speed spindle is composed of angular contact ceramic ball bearings, high speed built-in motor, oil jacket cooling and so on. The thermal analyses of high speed spindle need to minimize the thermal effect and maximize the cooling effect and they are carried out under the various cooling conditions. Heat generations of the bearing and the high speed motor are estimated from the theoretical and experimental data. This result can be applied to the design and manufacture of a high speed motor spindle.