• 전자공학회논문지
• /
• 제50권7호
• /
• pp.19-26
• /
• 2013

본 논문에서는 모든 Toeplitz Jacket 행렬이 순환(circulant)하고 동치(equivalence)에 이름을 보여준다. 순환하고 동치에 이르면 Toeplitz Jacket 행렬의 새로운 구조를 만들 수 있다. Toeplitz Jacket(TJ) 행렬의 구성법을 제시하고 $4{\times}4$과 $8{\times}8$의 Toeplitz Jacket 행렬의 예를 제시 하였다. 따라서 Toeplitz real Jacket 행렬은 순환하거나 negacycle임을 보여준다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1240-1249
• /
• 2008

Jacket anchor was developed to increase the pullout resistance of general ground anchor in soft ground, and the mechanism of pullout resistance of jacket anchor was analyzed. Also, the ultimate bond stress of jacket anchor was estimated by ultimate resistance which is determined by field tests. Grout milk was injected into the jacket to make grout bulb of jacket anchor. The formation of grout bulb of jacket anchor increases the diameter of grout bulb, ground strength and confining pressure between anchor grout and soil. From the twelve field test results, it was observed that the pullout resistance of jacket anchor is 15.38~295.02%(average 83.53%) greater than that of general ground anchor, and plastic deformation of jacket anchor is 20.78~1,496.45%(average 288.78%) smaller than that of general ground anchor at the same load cycle. Especially, it was investigated that the increase of ultimate resistance over 200% and the reduction of plastic deformation over 600% was obtained in gravel layer. It means that the jacket anchor is superior to the general ground anchor in gravel layer. Finally, the ultimate bond stress was proposed to design jacket anchor.

• 한국인터넷방송통신학회논문지
• /
• 제15권5호
• /
• pp.39-49
• /
• 2015

Jacket Matrices: Construction and Its Application for Fast Cooperative Wireless signal Processing[27]에 소개된 Jacket 행렬로부터 일반화된 의사 Jacket 행렬에 대한 특성과 생성에 관한 정리가 발표됐다. 본 논문에서는 MIMO 채널과 같이 $2{\times}4$, $3{\times}6$ 같은 비정방 행렬에서의 의사 Jacket 역행렬에 대한 예제를 제안했다. 또한 의사 MIMO 특이값 분해 (SVD, Singular Value Decomposition) channel을 추론하여 적용하였으며 안테나 어레이를 분할하여 추정하는 채널을 기반으로 SVD를 활용하는데 적용하였다. 이것은 MIMO 채널 및 고유값 분해 (EVD, Eigen Value decomposition) 등에 사용할 수 있다.

• Journal of electromagnetic engineering and science
• /
• 제6권4호
• /
• pp.244-252
• /
• 2006

A block Jacket transform and. its block inverse Jacket transformn have recently been reported in the paper 'Fast block inverse Jacket transform'. But the multiplication of the block Jacket transform and the corresponding block inverse Jacket transform is not equal to the identity transform, which does not conform to the mathematical rule. In this paper, new binary block Jacket transforms and the corresponding binary block inverse Jacket transforms of orders $N=2^k,\;3^k\;and\;5^k$ for integer values k are proposed and the mathematical proofs are also presented. With the aid of the Kronecker product of the lower order Jacket matrix and the identity matrix, the fast algorithms for realizing these transforms are obtained. Due to the simple inverse, fast algorithm and prime based $P^k$ order of proposed binary block inverse Jacket transform, it can be applied in communications such as space time block code design, signal processing, LDPC coding and information theory. Application of circular permutation matrix(CPM) binary low density quasi block Jacket matrix is also introduced in this paper which is useful in coding theory.

• 한국의상디자인학회지
• /
• 제23권2호
• /
• pp.105-114
• /
• 2021

This study aims to evaluate the differences in visual images due to the variations in the silhouette and jacket type of men's suits. Six samples were used for this study: 3 examples had variations in the silhouette while 2 variations were in the jacket type. They were evaluated using a 7-point rating scale and a survey was conducted among 80 fashion students. The data was analyzed by Factor Analysis, ANOVA, Scheffé Test, and the MCA method. This study's results are as follows: 1) According to Factor Analysis, the components of visual evaluation by the silhouette and the jacket type of men's suit were classified into: attractiveness, masculinity, practicality, and naturalness. Among these factors, attractiveness and masculinity were evaluated to be the most important factors. 2) Men's suits with a single-breasted jacket had a simple and practical images in fitted and boxy silhouettes. Double-breasted jacket suits showed sexy, refined, and chic images in the fitted and slim silhouettes, and expressed an adult, profound, and conservative images in the boxy and fitted silhouettes. 3) The silhouette and the jacket type of men's suit interacted with masculinity and the practicality. Fitted and slim silhouette suits had different images that looked adult, profound, and conservative depending on the jacket type, but the boxy silhouette suit did not show the same effect. 4) According to the MCA on the attractiveness and the naturalness, the jacket type affected the visual image of men's suit more than the silhouette. Double-breasted jacket suits had more sexy, refined, and chic image than the single-breasted jacket suits. Men's suits with a single-breasted jacket had a more comfortable and natural image than those with a double breasted jacket.

• 패션비즈니스
• /
• 제11권6호
• /
• pp.101-114
• /
• 2007

This research aimed to identify the differences, in terms of the pattern, of using wool and jersey for designing jackets and to provide a theorized solution. The object of this study is development of women's tailored jacket pattern by the traits of fabrics with fabrics those are generally used to develop the power of manufacturing technique about fit of jacket. Basic bodies prototype, graphics of sleeves prototype and graphics of jacket pattern those a clothing company at present(on&on, a brand of Beaucre Merchandising Co.,Ltd) is using were used as basics of tailored jacket pattern. Three kinds of fabric(wool, polyester, jersey) were chosen, we made jackets in the same manufacturing process of the clothing company, modified and made up for the weak points and then we compared and analyzed differences of pattern by the traits of fabrics, the results are as follows: 1) We drafted basic tailored style jacket pattern, made a jacket with wool fabric, made wearing experiment, modified and made up for the weak points by the trend, then developed JacketⅠ for study; 2) With JacketⅠ for study as the basic, we made a jacket with polyester fabric, made wearing experiment, modified and made up for the weak points, then developed Jacket II for study; 3) With JacketⅠ for study as the basic, we made a jacket with jersey fabric, made wearing experiment, modified and made up for the weak points, then developed Jacket III for study; 4) We presented final degree of polymerization of pattern with Jacket I II III for study; 5) We compared and analyzed the differences of pattern with the degree of polymerization of pattern with Jacket I(Wool) for study and Jacket II(Polyester), there was no change of size overall except extra amount which happens because of the trait of the fabric in 20 items of body format pattern, there were differences of size in 3 items(height of a sleeve, width of a sleeve, length of a sleeve) among 5 items of sleeves pattern; 6) We compared and analyzed the differences of pattern with the degree of polymerization of pattern with Jacket I(Wool) for study and Jacket III(Jersey) for study, there were differences of size by the kinds of fabric in 11 items(neck point to shoulder point length, Bishoulder point length, back interscye length, front interscye length, armhole circumference, depth of armhole, chest circumference, bust circumference, waist circumference, hip circumference, waist dart) among 20 items of body format pattern, there were differences of size by the kinds of fabric in 5 items(height of a sleeve, circumference of a sleeve, width of a sleeve, length of a sleeve, width of bottom of a sleeve) among 5 items of sleeves pattern.

• 전자공학회논문지
• /
• 제51권9호
• /
• pp.30-40
• /
• 2014

본 논문에서는 Hadamard 변환이 Jacket 변환으로 일반화 될 수 있는 것처럼 Haar 변환을 Jacket-Haar 변환으로 일반화 한다. Jacket-Haar 변환의 원소는 0 과 ${\pm}2^k$ 이다. original Haar 변환과 비교해서 Jacket-Haar 변환의 베이시스(basis)는 신호처리에 보다 적합하다. 응용으로 $2{\times}2$ Hadamard 행렬을 기반으로 한 DCT-II(discrete cosine transform-II)와 $2{\times}2$ Haar 행렬을 기반으로 한 HWT(Haar Wavelete transform)를 제시하고 이들의 성능을 분석하며 Lenna 이미지의 시뮬레이션을 통해 성능을 평가하였다.

• 복식
• /
• 제55권2호
• /
• pp.92-104
• /
• 2005

This study aimed to reveal the concept and background of emergence of black leather jacket that began appearing in full-scale among youth sub-culture from 1950's, and to research its styles and aesthetic features on the basis of that. The researcher has intended to a theoretical frame to recreate black leather jacket which has been developing in youth sub-culture style as a resource of new design in modern fashion trend through this study There are 5 styles of black leather jacket in youth sub-culture after 1950's. Firstly, biker style black leather jacket showed ruined war heroes substituting for military uniform. Secondly, rocker style black leather jacket brought the conversion in definition of masculinity. Thirdly, greaser style black leather jacket showed the beauty of uncleanness expressing resistance and violence with tattered dirty materials and excessive metal ornaments. Fourthly, headbanger style black leather jacket was prominent in various and compound decoration due to combination of rocker and hippie features. fifthly, punk style black leather jacket was influenced greatly by Sex Pistols. There are broadly three ecstatic features oi black leather jacket among youth sub-culture. With regard to displaying terrorism, black leather jacket displayed threatening aspects with black color, formative beauty of inverted triangle, additional decoration, and animal & brutal feelings. Paradoxical trophyism showed Nihilism, disorder, and resistance through black color that symbolize bad luck and unstability, trophyism with bad flavor, tattered material effect, and destructive message painting. Masculine eroticism appeared in accordance with pursuing after pleasure and masculine sexuality through exposure of buttocks and focused penis due to jacket's short length, and fetish of black.

• 복식문화연구
• /
• 제23권5호
• /
• pp.835-845
• /
• 2015

This study aims to suggest the proper ease for slim-fit jackets according to the number of buttons from a one-button jacket to four-button jackets for men in their 30's. The researchers carried out both an appearance evaluation and movement functionality evaluation. The results are as follows: When conducting the appearance evaluations, meaningful differences were found. The one-button jacket showed high scores for the 7.5 cm ease. The two-button jacket and the three-button jacket showed high scores for the 10.5 cm ease. The four-button jacket showed a high score for the 13.5 cm ease. Next, the results of the movement functionality evaluation showed the same trend; as the ease was increased from 7.5 cm to 13.5 cm, the scores increased. This is because if the garments offer more ease, this gives room for actions. Additionally, it showed that if there were fewer jacket buttons, then the results showed a high score. The researchers believe that if the number of jacket buttons is lower, then the area of the V-zone increases, so that there is more room for movement. The study suggests a proper chest ease of 7.5 cm for the one-button jacket, 10.5 cm for the two-button jacket and three-button jacket, and 13.5 cm for the four-button jacket, respectively.

• 한국치위생학회지
• /
• 제9권4호
• /
• pp.559-568
• /
• 2009

Objectives : In order to manage to reformative tendency of the educational whole with change request of dental hygienics education which is diversificated and professionalized the manufacturing practice of a temporary resin jacket which is educated with from much dental hygiene is become accomplished, so far also the recognition which relates with the manufacturing practice of a temporary resin jacket of dental hygiene students there is not researched. The present research carried out the practice evaluation with the target of students of a dental hygiene department, who finished a manufacturing practice of a temporary resin jacket, analyzed and investigated the material, reported its result, and enforced a research. Methods : This research selected students of 6 dental hygiene departments located in the Daegu Gyeongbuk region, who have manufacturing experience of a temporary resin jacket, by a convenient sampling method, and then a questionnaire was executed by a self-administration method, and a total of 290 copies were statistically treated. The content of the questionnaire are composed of 2 questions on an attitude survey before and after manufacturing practice of a temporary resin jacket, 3 questions on an educator for practice of a temporary resin jacket, 7 questions on recognition of technical skills for manufacturing a temporary resin jacket, 9 questions on the practice content evaluation of manufacturing of a temporary resin jacket and recognition on manufacturing practice of a the temporary resin jacket. Results : 1. The average of recognition on technical skills for manufacturing a temporary resin jacket of a dental hygienist was 3.82 points, the average of evaluation on practice content of manufacturing a temporary resin jacket being 3.75 points, and the average of recognition on the practice of manufacturing a temporary resin jacket was 3.71 points. 2. Currently, as the educator for the practice of manufacturing a temporary resin jacket, dental hygienists were 188 persons(64.8%) and dental technicians was 102 persons(35.2%), and as educators they want in the future, dental hygienists were 97 persons(33.3%) and dental technicians was 193 persons(66.7%). Persons hoping reeducation for manufacturing a temporary resin jacket were 219 persons(85.9%). 3. There was a significant difference in consciousness of students before and after practice of manufacturing a temporary resin jacket(p<.001). 4. There was a significant difference in practice evaluation and practice recognition according to the educational subject(p<.001). 5. There was a significant reverse correlation in the educational subject, practice evaluation and practice recognition(p<0.01). Conclusions : The practice for manufacturing a temporary resin jacket in education of dental hygiene is necessary to improve job performance ability in more various and specialized dental treatment and to solve desire for improvement of professional technical skill ability of students, and accordingly. About study process of the future students observation investigation or student objective interview investigation etc. seeks a problem in the become research lead, the succeeding research which gropes the plan which is the possibility of solving the problem which discovered is thought will be necessary.