• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.295-299
• /
• 1996

In order to investigate the relation between the microstructure and the V-I characteristics of HTSC wire, single and 19 filamentary silver-sheathed Bi2223 tapes were fabricated using the powder-in-tube method. Higher J$\_$c/ at 77.3 K(0 T) and 4.2 K(in magnetic field) can be achieved for the 19 filamentary Bi tape, comparing the single filamentary tape. However, the I$\_$c/ distribution of 19 filamentary Bi2223 tape was found to be wider by analyzing the curve obtained from 2nd differential of V-I data. This was considered to be resulted from worse uniformity of oxide filament due to severe cold working.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.53-58
• /
• 2001

Solar energy has many advantage like as purity and infinity. Recently many researches about new energy source are processing in several places around the world. In this paper, the virtual implement of solar cell was proposed to solve the problems as reappearance and repetition of some situation in experiment of photovoltaic. To realize the VISC, mathematical model of solar cell for driving converter was studied and the buck converter were compared in viewpoint of tracking error of characteristic curve of solar cell using computer simulation. Also, Output characteristics of system analyzed through an experiment.

• 센서학회지
• /
• 제6권5호
• /
• pp.407-413
• /
• 1997

기판온도 $300^{\circ}C$에서 열증착법에 의해 p형 <100> Si 기판위에 CuPc(Copper Phthalocyanine) 결정 박막을 증착하였다. X선 회절분석으로부터 CuPc 박막은 a-축 방향으로 성장하였음을 알 수 있었다. CuPc분자들이 기판면위에 수직인 CuPc/Si박막의 광전특성을 조사하기 위하여 수직방향의 전류-전압 (I-V) 특성을 기판 Si의 특성과 비교 관찰하였다. 저항성 접촉을 위해 기판인 p형 Si위에 전극으로 Au를 증착시켰다. Au/Si 접합에 빛을 조사한 결과 전류는 증가하지만 광기전력효과는 관찰되지 않았다. p형 반도체인 CuPc 박막과 기판 p-Si의 접합은 장벽을 형성하지 않기 때문에 빛을 조사하지 않았을 때의 I-V 특성은 저항성을 나타낸다. 빛을 조사하였을 때 CuPc/Si 접합의 증가된 광전류는 Si 웨이퍼보다 현저하게 큰 것을 알 수 있다. 따라서 CuPc 층이 600 nm 파장에서의 붉은 빛을 현저하게 흡수하여 광전류에 기여하는 다량의 광캐리어를 형성함을 알 수 있다. CuPc/Si 박막은 $J_{sc}$ (short-circuit photocurrent) $4.29\;mA/cm^{2}$와 $V_{oc}$ (open circuit photovoltage) 12 mV의 광기전력 특성을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.266-271
• /
• 2001

Spherical indentation technique was developed to evaluate the flow properties of metallic materials in carbon steel, stainless steel and alloys, etc. Through the spherical indentation test, differently degraded 1Cr-1Mo-0.25V steel's mechanical properties were observed and compared with conventional standard test data. The flow properties of 1Cr-1Mo-0.25V steels were estimated by analyzing the indentation load-depth curve. To characterize the flow property, we used material yield slope and constraint factor index rather than strain-hardening exponent because the variation of strain-hardening exponent was very little and the data showed irregularly. And the constraint factor's effect was small when the material yield slope was taken into account.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.135-139
• /
• 2014

Different power output of solar cells can be observed at high-temperature regions such as desert areas. In this study, performance dependence on operating temperature of crystalline silicon solar cells with different emitter types was analyzed. Based on the light current-voltage (LIV) measurement, temperature coefficients of short-circuit current density ($J_{SC}$), open-circuit voltage ($V_{OC}$), fill factor (FF) and power conversion efficiency were measured and compared for two groups of crystalline silicon solar cells with different emitter types. One group had homogeneously doped (conventional) emitter and another selectively doped (selective) emitter. Varying the operating temperature from 25 to 40, 60, and $80^{\circ}C$, LIV characteristics of the cells were measured and the properties of saturation current densities ($J_0$) were extracted from dark current-voltage (DIV) curve. From the DIV data, effect of temperature on the performance of the solar cells with different electrical structures for the emitter was analyzed. Increasing the temperature, both emitter structures showed a slight increase in $J_{SC}$ and a rapid degradation of $V_{OC}$. FF and power conversion efficiency also decreased with the increasing temperature. The degrees of $J_{SC}$ increase and $V_{OC}$ degradation for two groups were compared and explained. Also, FF change was explained by series and shunt resistances from the LIV data. It was concluded that the degradation of solar cells shows different values at different temperatures depending on the emitter type of solar cells.

• 에너지공학
• /
• 제2권1호
• /
• pp.95-103
• /
• 1993

열전반도체를 이용한 소형열펌프의 개념 설계를 시도하고, 열역학적인 해석을 통하여 시스템의 성능을 예측하였으며 각 변수들이 시스템에 미치는 영향을 조사하였다. 일정한 조건 즉, $\mu$(=nν), J(=nI) 및 물의 유입 온도(Twi)가 주어졌을 때 대기의 온도 T$_{a}$ 가 증가할수록 성능계수와 냉방용량은 감소한다. 일정 냉방용량의 시스템을 설계하는 문제는 대기 온도와 물의 입구온도가 주어지면 $\mu$, J를 결정하는 문제로 귀결되며 기 제작된 열전소자를 사용한다면 v는 제작할 때 정해지므로 결국 n, ν, I의 최적 조합을 구하는 문제가 된다. 냉방용량 및 물의 온도가 주어졌을 때 $\mu$가 증가할수록 J가 증가하는 경향을 보인다. $\mu$-J 곡선과 최적 $\mu$값으로부터 최적 전류를 계산한다. 냉방 용량이 일정할 때 유량이 증가함에 따라 성능계수가 증가하며 COP$_{R}$ 증가의 경향은 대기온도가 낮을 수록 뚜렷하다. 흡열부보다 방열부의 열전달 계수가 시스템의 성능에 미치는 영항이 크다.

• Journal of Computational Design and Engineering
• /
• 제2권1호
• /
• pp.1-15
• /
• 2015

Measured bidirectional reflectance distribution function (BRDF) data have been used to represent complex interaction between lights and surface materials for photorealistic rendering. However, their massive size makes it hard to adopt them in practical rendering applications. In this paper, we propose an adaptive method for B-spline volume representation of measured BRDF data. It basically performs approximate B-spline volume lofting, which decomposes the problem into three sub-problems of multiple B-spline curve fitting along u-, v-, and w-parametric directions. Especially, it makes the efficient use of knots in the multiple B-spline curve fitting and thereby accomplishes adaptive knot placement along each parametric direction of a resulting B-spline volume. The proposed method is quite useful to realize efficient data reduction while smoothing out the noises and keeping the overall features of BRDF data well. By applying the B-spline volume models of real materials for rendering, we show that the B-spline volume models are effective in preserving the features of material appearance and are suitable for representing BRDF data.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권8호
• /
• pp.1119-1126
• /
• 2013

The objective of this study was to compare the goodness of fit of four lactation curve models: Wood's Gamma model (WD), Wilmink (WL), and Pollott's multiplicative two (POL2) and three parameters (POL3) and to determine the environmental factors affecting the complete lactation curve of F1 dairy sheep under organic management. A total of 5,382 weekly milk yields records from 150 ewes, under organic management were used. Residual mean square (RMS), determination coefficients ($R^2$), and correlation (r) analysis were used as an indicator of goodness of fit for each model. WL model best fitted the lactation curves as indicated by the lower RMS values (0.019), followed by WD (0.023), POL2 (0.025) and POL3 (0.029). The four models provided total milk yield (TMY) estimations that were highly correlated (0.93 to 0.97) with observed TMY (89.9 kg). The four models under estimated peak yield (PY), whereas POL2 and POL3 gave nearer peak time lactation estimations. Ewes lambing in autumn had higher TMY and showed a typical curve shape. Higher TMY were recorded in second and third lambing. Season of lambing, number of lambing and type of lambing had a great influenced over TMY shaping the complete lactation curve of F1 dairy sheep. In general terms WL model showed the best fit to the F1 dairy sheep lactation curve under organic management.

• 한국결정성장학회지
• /
• 제15권3호
• /
• pp.120-123
• /
• 2005

[ $Li_2CO_3-V_2O_5$ ], flux를 사용한 liquid phase epitaxy(LPE) 법을 사용하여 $LiNbO_3$ (001) 기판위에 5 mol% ZnO가 첨가된 $LiNbO_3$, 박막과 2 mol% MgO가 첨가된 $LiNbO_3$, 박막을 성장시켰다. $Zn:LiNbO_3$, 막과 $Mg:LiNbO_3$, 막과의 결정성과 격자 부정합은 x-ray rocking curve(XRC)로 분석되었다. 그리고 다층 박막의 단면에서의 ZnO와 MgO의 분포가 electron probe micro analyzer(EPMA)를 사용하여 관측되었다.

• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.18-22
• /
• 2006

Epitaxial aluminum nitride films on 6H-SiC (0001) were fabricated using reactive RF magnetron sputtering and post-deposition rapid thermal annealing. The electrical properties of AIN films depending on film thickness and measurement temperature have been observed. Full width at half maximum of AIN (0002) was $0.1204^{\circ}$ (about 430 arcsec) X-ray rocking curve results. The equivalent oxide thickness (EOT) of AIN film was estimated as about 10 nm and the leakage current density was within the order of $10^{-8} 4/cm^2$. The dielectric constant of AIN film estimated from the accumulation region of C-V curve measured at $300^{\circ}C$ was 8.3. The dynamic dielectric constant was obtained as 5.1 from J vs. 1/T plots at the temperature ranging from R.T. to $300^{\circ}C$ From above, estimation temperature dependance of the electrical properties of Al/AIN/SiC MIS devices was affirmed and useful data compilation for the reliabilities of SiC MIS is expected.