• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1084-1089
• /
• 2009

A numerical study of thermo-flow characteristics is presented to determine correlations of pressure drop and heat transfer for offset-strip fins. As a blockage ratio increased, previous correlations underestimate f values in laminar and turbulent regimes, and overestimate j values in laminar regime. Therefore, new correlations, which are applicable to fins with blockage ratios more than 15%, are presented.

• Journal of Advanced Marine Engineering and Technology
• /
• v.6 no.1
• /
• pp.41-48
• /
• 1982

One of the important subjects in fracture mechanics study is to analyze the stress intensity factor. In this paper, the stress intensity factor in Mode I ($K^{I}$) is determined by J-integral using the finite element method. In this investigation, the values of $K^{I}$ are computed for distorted and undistorted elements of 8-noded isoparametric finite elements. The numerical results obtained are summarized as follows. (1) Through a relatively coarse mesh, the $K^{I}$ values obtained by this method are fairly good accuracy. (2) The $K^{I}$ values for the distorted elements appear to be better than those obtained using the undistorted mesh. (3) Within the limits of these analyses, the solutions obtained through the integral paths in the medium region of elements approach to the analytical solution most closely.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.1
• /
• pp.11-14
• /
• 2003

The high Q(quality factor) suspended spiral inductors were fabricated on the silicon substrate by 3D surface micromachined process. The integration of 2.4GHz VCO has been performed by fabricating suspended spiral inductor of the top of CMOS VCO circuit. The phase noise of VCO integrated MEMS inductor is 93.5 dBc/Hz at 100kHz of offset frequency.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2274-2279
• /
• 2008

This paper numerically investigates thermo-flow characteristics of offset strip fins to obtain a correlation of heat transfer and pressure drop. The flow is divided into three regimes, i.e. laminar, transition and turbulent. The predicted j and f values from the SST k-w turbulence model agree with previous correlations with the error less than 20% in transition and turbulent regimes. Prandtl number is varied from 0.5 to 40 and a correlation to predict heat transfer and pressure drop for offset strip fins is suggested.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.220-222
• /
• 2004

The piezoelectric ceramics for a step-up piezoelectric transformer are desired large electromechanical coupling factor, high mechanical quality factor and good characteristic resonance frequency. In this study, the empirical formula of specimens is used $0.9Pb(Zr_xTi_{1-x})O_3-0.1Pb(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$ (PZT-PMNS). The piezoelectric and dielectric characteristic are investigated by sintering temperature and value of x as functions of $Ti^{2+}$, $Zi^{2+}$ mol rate. MPB(morphotropic phase boundary) is defined in the x=0.522. Because it is appeared to the best piezoelectric and dielectric characteristic in the x=0.522, it can be application of step-up transformer.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.51-51
• /
• 2003

Oct-4 is a maternally expressed octamer-binding protein encoded by the murine Oct-4 gene. It is present in unfertilized oocytes, but also in the inner cell mass and in primordial germ cells. In addition, Oct-4 is the first transcrition factor described that is specific for the blastocysts stage bovine embryos. The spatial and temporal expression patterns were further determined using Immunohistochemistry. With this technique Oct-4 protein expression is detected in the oocyte, in the blastocyst. After pregnancy Oct-4 expression is restricted ovary and placental tissue. Therefore Oct-4 is a transcription factor that is specifically expressed in cells participating in the pregnancy of Korean native cattle. These result suggest that Oct-4 localization and expression may contribute to the defects in the developmental normal seen in Korean native cattle.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.269-278
• /
• 2011

We investigate the heat-transfer and pressure-drop characteristics of fin-and-tube heat exchangers with a copper plate or copper spiral fins. Twenty-four samples with different fin pitches and tube rows were tested. For both configurations, the effect of the fin pitch on the j factor is negligible, and the f factor increases with the fin pitch. The effect of the tube row depends on the configuration. For plate fin-and-tube heat exchangers, the j factor decreases as the row number increases; the reverse is true for spiral exchangers. We explain this by considering the flow pattern. The j factor for plate fin-and-tube heat exchangers is larger than that for spiral exchangers, and the difference decreases as the row number increases. The f factor of the plate fin-and-tube heat exchanger is also larger. We compare our results with existing predictions of correlations.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.296-299
• /
• 2007

The focus of this study is to estimate the stiffness factor of the separator plate of MCFC (Molten Carbonate Fuel Cell) at the elevated temperature. The process factors affecting the stiffness of the separator plate were chosen to determine the most important factor using the finite element analysis with the Taguchi method. The most influential factor, picked out by the ANOYA, turned out the pitch in the separator plate.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.3
• /
• pp.355-359
• /
• 1997

Leiomyomas, which are the commonest pelvic tumors in women, are originated from myometrial cells. Although the exact initial pathophysiologic event of the leiomyoma is not known, recent evidences suggested that the effects of sex steroid hormones in the process of tumor growth are mediated by local production of growth factors including epidermal growth factor (EGF), insulin-like growth factor-I (IGF-I) and insulin-like growth factor-II (IGF-II). If we look at the effects of other cytokines, it was suggested that basic fibroblast growth factor (bFGF) may stimulate the proliferation of myometrial and leiomyomas cells. And it was reported that interferon-${\alpha}$ inhibit the action of bFGF. Therefore, we examined the effect of bFGF and interferon-${\alpha}$ on the proliferation of leiomyoma and myometrial cells. bFGF stimulated the myometrial and leiomyoma cells significantly at the concentration of 1ng/ml (p<0.05) and 5ng/ml (p<0.05). However, Interferon-${\alpha}$ inhibited the cell proliferation of myometrial and leiomyoma cells significantly at the concentration of 100U/ml (p<0.05) and 1000U/ml (p<0.05). And the stimulated effects of bFGF with the various concentration on the myometrial and leiomyoma cells ware inhibited by interferon-${\alpha}$ with 100U/ml. Therefore, we concluded that bFGF may stimulate the myometrial and leiomyoma cell proliferation and interferon-${\alpha}$ may inhibit the myometrial and leiomyoma cell proliferation through blocking the effect of basic fibroblast growth factor.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.481-484
• /
• 2003

A strategy for a torque ripple reduction drive of single-phase SRM with high power factor is proposed. The drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current with low torque ripple. The proposed SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as dc source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit is discussed in depth through the experimental results.