• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.7
• /
• pp.101-107
• /
• 1994

In this work a scanning capacitance microscopy(SCaM) by stage driving is proposed and presented some of the experimental results.SCaM is a microscope which scans a surface of materials mechanically in two or two point five dimensions by a capacitance probe with a few tenth $\mu\textrm{m}$ ize tip, and display images of the surface shape or capacitive distribution. The present target of the SCaM is 0.1$\mu\textrm{m}$ resolution power which exceeds that of optical microscope. This will become a powerful tool for inspecting ULSI pattern etched by X-ray biological data etc. The experimental system is composed based on a VHD video disk which captures the capacitance changes of the video disk surface and converts it into video signal.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.4
• /
• pp.398-407
• /
• 2008

We consider a product recovery system that a single product is stocked in order to meet a demand from customers who may return products after usage. This paper addresses a problem of when to release a procurement process to replenish serviceable inventory and how many new products to procure. The structure of the optimal procurement policy is examined and numerically identified as a monotonic threshold curve. A numerical procedure is presented to jointly find the optimal procurement order size, optimal procurement policy, and optimal discounted profit. Sensitivity analysis also indicates that these optimal performance measurements have monotonic properties with respect to system parameters.

• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.464-470
• /
• 2018

With the introduction of the e-learning since 2000, the place of the education has not been limited to off-line, but the range of it has become broader in online. The e-learning market has evolved steadily over time. With the advent of the term "Edu-tech", which means a combination of education and technology, various IT technologies have incorporated education. Particularly, the Korean education market collects patterns by computerizing the learning history in classes taught according to curriculums. Because of that environment, various personalized learning services have been developed which maximize the effect of the learning. These services have qualitative differences depending on how many data is accumulated and algorithms are developed for the precise analysis. The purpose of this study is to recognize and data-ize OMR marking by the most suitable method to convert analog data into digital data without harming the Korean education system.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.38-45
• /
• 1989

In this study, in order to evaluate the shape and the size of the plastic zone at the notch tip before stable crack growth, a newly developed technique for plastic strain measurement, that is, the recrystallization-etching technique was applied to observe the intense strain zone at the notch tip of weld HAZ. 1) The recrystallized specimens showed that the amount of the intense strain zone, more than 20% plastic zone, was quantitatively observed as the plane strain state during the growth of the plastic zone. 2) The behavior of plastic deformation at midsection are different for parent and weld HAZ. In addition, the micro crack initiation occurs at midsection, parent and weld HAZ when the crack opening displacement(COD) value is .delta.$_{t}$=0.4mm. 3) The plastic zone for parent proceeds in the forward direction at notch tip and for weld HAZ in the right and left direction at the notch tip. 4) The relation between plastic strain energy(Wp) and COD(.delta.$_{t}$) depended on yield stress, gradient and plastic strain size.ize.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.6
• /
• pp.86-95
• /
• 2003

The object of this paper is to correct check the tree situation and quantity around highway. Also, those data utilize in order to establish plan about how to the long and short term landscape construction and maintain program. The result of this study can be summarized as follows; 1. Tree decrease rates for 8 branch offices were Jongbu(5.62%), Gangwon(4.32%), Chungcheong (3.35%), Honam(5.62%), Gyeongbuk(3.06%), Gyeongnam(5.60%), Seorak training center(0.31%), Headquarter(1.54%). Also decrease causes were traffic accidents(1.8%), air po11ution(4.7%), humid damage(0.9%), insect and disease(1.2%), wind and rainfall(3.4%), dry damage(3.5%), cold damage (1.0%), fire(3.1%), damage of the man and anima1(4.1%), remove bad tree(13.1%), bad rooting(9.5%) and etc.(53.7%). 2. Improve methods of tree death problems were regulation management(ferti1ize, irrigation and pesticide work), improvement of draining system, Pull out the weeds, Plant native plants, utilize organic matter fertilize and plant environment trees.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.47-54
• /
• 2010

Until recently, GIS technology was mainly based on 2D for disaster management. Necessity of 3D spatial information came to the fore with a speedy and accurate response system in disaster management. However, most fire-fighting facilities presently use CAD with 2D formation, Image drawings, and conception of construction data's formation. It is not about the drawings in map production. It's about varieties of construction ways or contents. In this study, we are proposing the ways on analyzing the existing disaster management targets for 2D technology drawings, designing the 3D spatial information data model, and transforming the effective 3D spatial information into algorithm and dimension spatial information construction for easily building on mass 2D architectural drawings to 3D spatial information effectively in disaster management. We can maxim ize efficient construction time and expenses. Then what is proposed in this study about constructing 3D spatial information for manual work, and it's significance for improving decisive decisions and utilizing the tasks to prevent, prepare, respond and restore steps in disaster management.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.105-114
• /
• 2009

Recently, location-based services which provides k nearest POIs, e.g., gas stations, restaurants and banks, are essential such applications as telematics, ITS(Intelligent Transport Systems) and kiosk. For this, the Voronoi Diagram k-NN(Nearest Neighbor) search algorithm has been proposed. It retrieves k-NNs by using a file storing pre-computed network distances of POIs in Voronoi diagram. However, this algorithm causes the cost problem when expanding a Voronoi diagram. Therefore, in this paper, we propose an algorithm which generates a matrix of the shortest distance between border points of a Voronoi diagram. The shortest distance is measured each border point to all of the rest border points of a Voronoi Diagram. To retrieve desired k nearest POIs, we also propose a k-NN search algorithm using the matrix of the shortest distance. The proposed algorithms can m inim ize the cost of expanding the Voronoi diagram by accessing the pre-computed matrix of the shortest distances between border points. In addition, we show that the proposed algorithm has better performance in terms of retrieval time, compared with existing works.

• The Research Journal of the Costume Culture
• /
• v.25 no.5
• /
• pp.670-681
• /
• 2017

Firefighting hoods protect the head, face, and neck areas of officials while they perform firefighting services. The purpose of this study is to investigate the head size of Korean firefighting officials in order to establish the dimensions necessary to construct firefighting hoods. A total of 98 male firefighting officials participated in this study and 11 body dimensions, necessary for the construction of firefighting hoods, were measured. The data collected from the firefighting officials were compared to the general adult male data from the Size Korea national anthropometric study. The heights, weights, head circumferences, head heights, and bitragion arcs of the firefighters were significantly larger than those of general adult males, which shows that firefighting officials generally have larger body and head sizes than general adult males. Based on the results of Pearson's correlation coefficients, head circumference and head height were judged to be the important measurements for the construction of the firefighting hoods. Thus, these two measurements were chosen as the basic dimensions of the cross tabulation analysis. As a result, head circumferences of 57.00~60.99cm and head heights of 23.00~25.99 cm were found to be important measurement ranges among the firefighters. This study is expected to be used as the basis for the creation of firefighting hoods that help to ensure the safe rescue activities for firefighting officials.

• KSBB Journal
• /
• v.27 no.6
• /
• pp.347-351
• /
• 2012

This study was conducted to optim ize the composition of CEM (cabbage extract medium) and cryoprotectants on the growth of Lactobacillus plantarum, a probiotics growing in plant and milk. For this, we analyzed the growth characteristics of Lb. plantarum in CEM and subsequently optimized the medium composition by addition of carbon, nitrogen sources and buffering agents. Among carbon sources, glucose showed the best result to increase the cell density after dilution of CEM. When 0.5% yeast extract and 1% soy peptone were supplemented in the diluted CEM, Lb. plantarum grew up to the maximum cell density. Addition of buffering agents in CEM was not significantly effective to increase the cell density. Meanwhile, addition of 12% skim milk, 5% sucrose and 0.5% glycerol showed a cryoprotective effect against cell damage of Lb. plantarum during freeze drying process showing high survival rate after 150 days. This optimized CEM can be used for economical production of bacterial cells particularly originated from a plant-related ecosystem.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.4-11
• /
• 1995

The amounts of waste stone and stone powder sludge that occurred in the quarry and processing plant of s stone plates, have been increased with the development of stone industry. The manufactunng process of 따tificial s stone was studied to reduce the outlet of these wastes and utilIze them as raw materials for architecture, interior decoration and art work. In order to compare the properties of artiflcial stone with those of natural building-stone, the physi$\alpha$II properties of artificial stone such as specific gravity, absorption ratio, elastic wave velocity, compressive s strength, tensile strength, shore hardness, elasticity and Poission's ratio were measured. From the mesaured d data of physical properties, it was found that physical propertIes of artificial stone were controlled by homogeneous m mixing ratio of constituents, molding pressure, and amount of binder. Also, from the thermo-gravimetric analysis, it was found that artIfIcial stone manufactured had a good thermal stability up to $300^{\circ}C$. It was concluded that t the optimum conditions for manufacturing process of artificial stone were $200kg/\textrm{cm}^2$ of molding pressure, 12-15 w weight % of binder amounts.