• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4240-4258
• /
• 2016

A practical iterative channel estimation technique is proposed for the multiple-input-multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) system in the high-speed mobile environment, such as high speed railway scenario. In the iterative algorithm, the Kalman filter and data detection are jointed to estimate the time-varying channel, where the detection error is considered as part of the noise in the Kalman recursion in each iteration to reduce the effect of the detection error propagation. Moreover, the employed Kalman filter is from the canonical state space model, which does not include the parameters of the autoregressive (AR) model, so the proposed method does not need to estimate the parameters of AR model, whose accuracy affects the convergence speed. Simulation results show that the proposed method is robust to the fast time-varying channel, and it can obtain more gains compared with the available methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.25-33
• /
• 2018

In this paper, we propose an iterative self-interference (SI) channel estimation method for in-band full-duplex cellular systems that employ orthogonal frequency division multiple access (OFDMA) on downlink (DL) and single-carrier frequency division multiple access (SC-FDMA) on uplink (UL), as in Long Term Evolution (LTE) systems. The proposed method first acquires coarse estimates of SI channels using DL signals and UL pilots, which are known to the base stations, and then refines the estimates by consecutively exploiting averaging in the frequency domain and channel truncation in the time domain. In addition, the method enhances the estimates further by iteratively executing this estimation procedure, and does not require any radio resources dedicated to SI channel estimation. Simulation results demonstrate that by significantly improving the SI channel estimation performance without requiring exact knowledge of the SI channel length, the proposed method achieves UL channel estimation performance and signal-to-interference-plus-noise ratio (SINR) performance very close to those in perfect SI cancellation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5394-5409
• /
• 2019

The paper investigates a novel detector receiver with Kalman channel information estimator and iterative channel response equalization for MIMO (multi-input multi-output) OFDM (orthogonal frequency division multiplexing) communication systems in fast multipath fading environments. The performances of the existing linear equalizers (LE) are not good enough over most fast fading multipath channels. The existing adaptive equalizer with decision feedback structure (ADFE) can improve the performance of LE. But error-propagation effect seriously degrades the system performance of the ADFE, especially when operated in fast multipath fading environments. By considering the Kalman channel impulse response estimation for the fast fading multipath channels based on CE-BEM (complex exponential basis expansion) model, the paper proposes the iterative receiver with soft decision feedback equalization (SDFE) structure in the fast multipath fading environments. The proposed SDFE detector receiver combats the error-propagation effect for fast multipath fading channels and outperform the existing LE and ADFE. We demonstrate several simulations to confirm the ability of the proposed iterative receiver over the existing receivers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11C
• /
• pp.1108-1115
• /
• 2005

In this paper, we propose a practical iterative channel estimation and decoding method for an LDPC-coded frequency hopping OFDMA system in the uplink of a packet-based cellular system. In the method, the channel gain and noise variance are iteratively estimated with both pilot symbols and LDPC decoder outputs to provide more reliable decoding metrics in intercell interference (ICI) environments. In addition, the channel correlation coefficient is also estimated to select proper filter coefficients according to the channel variation rate. Through simulations under the various channel conditions and different receiver configurations, it is shown that the proposed iterative receiver improves the performance without boosting the pilot power and mitigates the adverse effects of the non-uniform ICI.

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.447-457
• /
• 2014

In this paper, we investigate the frequency domain channel estimation for multiple-input multiple-output (MIMO) single-carrier frequency-division multiple-access (SC-FDMA) systems. In MIMO SC-FDMA, code-division multiplexed (CDM) pilots such as cyclic-shifted Zadoff-Chu sequences have been adopted for channel estimation. However, most frequency domain channel estimation schemes were developed based on frequency-division multiplexing of pilots. We first develop a channel estimation error model by using CDM pilots, and then analyze the mean-square error (MSE) of various minimum MSE (MMSE) frequency domain channel estimation techniques. We show that the cascaded one-dimensional robust MMSE (C1D-RMMSE) technique is complexity-efficient, but it suffers from performance degradation due to the channel correlation mismatch when compared to the two-dimensional MMSE (2D-MMSE) technique. To improve the performance of C1D-RMMSE, we design a robust iterative channel estimation (RITCE) with a frequency replacement (FR) algorithm. After deriving the MSE of iterative channel estimation, we optimize the FR algorithm in terms of the MSE. Then, a low-complexity adaptation method is proposed for practical MIMO SC-FDMA systems, wherein FR is performed according to the reliability of the data estimates. Simulation results show that the proposed RITCE technique effectively improves the performance of C1D-RMMSE, thus providing a better performance-complexity tradeoff than 2D-MMSE.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.203-208
• /
• 2006

Channel estimation and data detection for OFDM systems over time- and frequency-selective channels are investigated. Relying on the complex exponential basis expansion channel model, a pilot-embedded channel estimation scheme with low computational complexity and spectral efficiency is proposed. A periodic pilot sequence is superimposed at a low power on information bearing sequence at the transmitter before modulation and transmission. The channel state information(CSI) can be estimated using the first-order statistics of the received data. In order to enhance the performance of channel estimation, we recover the transmitted data which can be exploited to estimate CSI iteratively. Simulation results show that the proposed method is suitable for doubly-selective channel estimation for the OFDM systems and the performance of the proposed method can be better than that of the Wiener filter method under some conditions. Through simulations, we also analyze the factors which can affect the system performances.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.4
• /
• pp.410-418
• /
• 2022

Channel reliability estimation for iterative codes such as turbo codes is very important factor in time varying underwater acoustic channel, an incorrect estimation of channel reliability induced performance degradation. Therefore, this paper presents an optimal channel reliability estimation method for turbo coded FSK signal with rate of 1/3. The estimated BER algorithm is a method that can estimate the reliability of received data by comparing received data and decoded data, and we determine optimal channel reliability by using the method. In order to analyze the performance, the experiment was conducted on a lake in Munkyeong city by moving in the range of 300 m to 500 m. At the result of applying presented method to failed decoding packets, we confirm all packets are decoded successfully.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.32-36
• /
• 2016

In wireless communication systems, jamming attack is a critical threat. Especially, reactive jamming can jam when the sender and receiver are communicating, which can maximize the attack efficiency of jamming. In this paper, we use the property of multi-input multi-output (MIMO) technology to achieve jamming resilient orthogonal frequency-division multiplexing (OFDM) communications. In particular, we use MIMO interference cancellation to remove the jamming signals strategically. We first investigate the reactive jamming attack model and their impacts on the MIMO-OFDM systems. We then present an iterative channel estimation algorithm that exploits MIMO interference cancellation. Our simulations show various anti-jamming methods and demonstrate the efficiency of our proposed algorithm under the reactive jamming attack.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.167-173
• /
• 2003

We treat the problem of channel estimation and interference cancellation in multiuser ultra-wide-band (UWB) communication systems over multipath fading channels. The UWB system under consideration employs a random time-hopping impulse radio format. We develop a channel estimation method based on linear weighted algorithm. An iterative channel estimation and interference cancellation scheme is proposed to successively improve the receiver performance. We also consider systems employing multiple transmit and/or receive antennas. For systems with multiple receive antennas, we develop a diversity receiver for the wellseparated antennas. For systems with multiple transmit antennas, we propose to make use of Alamouti’s space-time transmission scheme, and develop the corresponding channel estimation and interference cancellation receiver techniques. Simulation results are provided to demonstrate the performance of various UWB receiver techniques developed in this paper.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.333-335
• /
• 2010

This letter proposes a non-coherent blind time-of-arrival (TOA) estimation scheme for impulse radio ultra-wideband systems. The TOA estimation is performed in two consecutive phases: the Rayleigh-quotient theorem-based coarse-signal acquisition (CSA) and the iterative-threshold-test-based fine time estimation (FTE). The proposed scheme serves in a blind manner without demanding any a priori knowledge of the channel and the noise. Analysis and simulations demonstrate that the proposed scheme significantly increases the signal detection probability in CSA and ameliorates the TOA estimation accuracy in FTE.