• 한국재료학회지
• /
• 제11권12호
• /
• pp.1068-1073
• /
• 2001

An n-type iron$silicide(Fe_{0.98}Co_{0.02}Si_2)$has been produced by mechanical alloying process and consolidated by vacuum hot pressing. Although as-milled powders after 120 hours of milling did not show an alloying progress,${\beta}-FeSi_2$phase transformation was induced by isothermal annealing at$830{\circ}C$for 1 hour, and the fully transformed${\beta}-FeSi_2$phase was obtained after 4 hours of annealing. Near fully dense specimen was obtained after vacuum hot pressing at$ 1100{\circ}C$with a stress of 60MPa. However, as-consolidated iron silicides were consisted of untransformed mixture of ${\Alpha}-Fe_2Si_5$and ${\varepsilon-FeSi$phases. Thus, isothermal annealing has been carried out to induce the transformation to a thermoelectric semiconducting${\beta}-FeSi_2$phase. The condition for${\beta}-FeSi_2$transformation was investigated by utilizing DTA, SEM, and XRD analysis. The phase transformation was shown to be taken place by a vacuum isothermal annealing at$830{\circ}C$and the transformation behaviour was investigated as a function of annealing time. The mechanical properties of${\beta}-FeSi_2$materials before and after isothermal annealing were characterized in this study.

• 폴리머
• /
• 제36권6호
• /
• pp.803-809
• /
• 2012

에틸렌-테트라플르오르에틸렌(ETFE) 공중합체의 비등온 결정화 거동을 DSC와 imaging FTIR을 이용하여 살펴보았다. 변형 비등온 Avrami 분석 결과, DSC에 의한 열분석의 경우 상대적으로 적은 결정화 엔탈피 변화로 인하여 Avrami 식에 의한 ln[-ln(1-X(t))] vs. ln(t) 곡선이 선형을 이루지 못하는 반면, 결정화에 의한 IR 흡수 강도 image의 변화에 의한 분석 방법인 imaging FTIR의 경우보다 선형적인 결과를 얻음에 따라 imaging FTIR이 ETFE 비등온 결정화 연구에 보다 효과적임을 알 수 있었다. 이와 함께 비등온 결정화에 의한 ETFE의 광학특성을 살펴본 결과, 서냉에 의하여 형성된 ETFE 결정의 빛 산란에 의하여 haze가 증가하며 따라서 투명도가 감소함을 알 수 있으며 비등온 결정화에 의하여 최대 8%의 투과도 감소가 일어남을 확인할 수 있었다. 이상의 결과로부터 결정화를 조절하는 냉각속도가 유리 대체 소재로 사용되고 있는 ETFE 필름의 광투과도 조절에 주요한 가공 변수임을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.1-12
• /
• 1995

Isothermal and thermal-mechanical fatigue characteristics of 12Cr heat resisting steel used for high temperature applications were investigated including hold time effects. Isothermal low cycle fatigue test at $600^{\circ}C$ and in-phase, out-of-phase thermal-mechanical fatigue test at 350 to $600^{\circ}C$ were conducted using smooth cylindrical hollow specimen under strain-control with total strain ranges from 0.006 to 0.015. Regardless of thermal-mechanical and isothermal fatigue tests, cyclic softening behavior was observed and much more pronounced in the thermal-mechanical fatigue tests with hold times due to the stress relaxation during the hold time. The phase difference between temperature and strain in thermal-mechanical fatigue tests resulted in significantly shorter fatigue life for out-of-phase compared to in-phase. The differences in fatigue lives were dependent upon the magnitudes of plastic strain ranges and mean stresses. During the hold time in the strain-controlled fatigue tests, the increase in the plastic strain range and the stress relaxation were observed. It appeared that the increase in plastic strain range per cycle and the introduction of creep damage made important contributions to the reduction of thermal-mechanical fatigue life with hold time, and the life reduction tendency was more remarkable in the in-phase than in the out-of-phase thermal-mechanical fatigue. Isothermal fatigue tests performed under the combination of fast and slow strain rates at $600^{\circ}C$ showed that the fatigue life decreased as the strain rate and frequency decreased,especially for the low strain ranges.

• 미생물학회지
• /
• 제47권2호
• /
• pp.103-109
• /
• 2011

Pectobacterium carotovorum subsp. carotovorum (PCC)는 세균성 무름병균으로 주로 감자, 양배추 등의 식물에서 질병을 일으킨다. 본 연구에서는 현장에서 신속하게 진단하기 위해 loop-mediated isothermal amplification법을 이용하여 1시간 내에 등온에서 검출 가능한 진단법을 개발하였으며, 이를 PCC-LAMP법이라 명명하였다. PCC의 lytic murein transglycolase 유전자를 특이적으로 증폭시키는 4개의 프라이머를 제작하였으며 최적 온도가 $61^{\circ}C$임을 확인하고 최적 조건을 확립하였다. 최적 조건을 바탕으로 4개의 프라이머가 $1{\times}10^3$ copies까지 검출하는 민감성을 확인할 수 있었다. 본 연구에서 개발된 PCC-LAMP법은 특이성 검사를 통해 PCC만이 특이적으로 검출됨을 확인하였으며, 이는 실제 시료에서도 적용 가능함을 확인하였다. PCC-LAMP법을 통하여 PCC를 신속하고 정확하게 검출함으로써 현장에서 유용하게 적용될 수 있을 것으로 사료된다.

• 한국재료학회지
• /
• 제26권1호
• /
• pp.54-60
• /
• 2016

We have investigated the crystallization mechanism of the lithium disilicate ($Li_2O-2SiO_2$, LSO) glass particles with different sizes by isothermal and non-isothermal processes. The LSO glass was fabricated by rapid quenching of melt. X-ray diffraction and differential scanning calorimetry measurements were performed. Different crystallization models of Johnson-Mehl-Avrami, modified Ozawa and Arrhenius were adopted to analyze the thermal measurements. The activation energy E and the Avrami exponent n, which describe a crystallization mechanism, were obtained for three different glass particle sizes. Values of E and n for the glass particle with size under $45{\mu}m$, $75{\sim}106{\mu}m$, and $125{\sim}150{\mu}m$, were 2.28 eV, 2.21 eV, 2.19 eV, and ~1.5 for the isothermal process, respectively. Those values for the non-isothermal process were 2.4 eV, 2.3 eV, 2.2 eV, and ~1.3, for the isothermal process, respectively. The obtained values of the crystallization parameters indicate that the crystallization occurs through the decreasing nucleation rate with a diffusion controlled growth, irrespective to the particle sizes. It is also concluded that the smaller glass particles require the higher heat absorption to be crystallized.

• 폴리머
• /
• 제24권1호
• /
• pp.105-112
• /
• 2000

본 연구에서는 항공기 구조용 재료로 쓰이는 탄소섬유/에폭시 복합재료 프리프레그(DMS 2224)를 모델시스템으로 하여 등온환경과 등속도 가열환경에서 경화반응 속도를 연구하였다. 이 복합재료의 공정온도에서의 가공공정을 묘사할 수 있는 현상학적인 반응속도 모델을 differential scanning calorimetry (DSC)와 이론을 통하여 제안하였다. 등온환경에서의 실험으로부터 반응특성곡선을 관찰한 결과 경화반응이 1차 반응함수임을 확인하였고, 활성화 에너지는 78.43 kJ/mo1을 얻었다. 이 프리프레그는 경화온도에 따라 한계경화도를 보여주어 유리화가 존재함을 확인하였고 이를 1차 반응속도 모델에 적용시킨 결과, 유리화 이후의 확산우세현상을 포함한 반응속도 모델을 제안하였다. 제안된 모델식을 이용하여 등온/등속도 가열환경을 포함한 실제 경화공정을 성공적으로 표현할 수 있었다.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.353-358
• /
• 2013

본 논문은 등온열처리 온도 및 시간에 따른 2.25Cr-1Mo강의 초음파 특성 변화를 조사하였다. Charpy 충격시험과 경도시험이 3종류의 열처리조건을 가지는 각 시편들에 대하여 실시되었다. 종파를 이용한 펄스-에코법이 초음파의 감쇠와 속도 측정에 사용되었다. 연취성천이온도(FATT)는 등온열처리 시간이 길어짐에 따라 증가하였는데, 이는 인성이 감소되고 있음을 의미한다. 등온열처리 시간과 온도의 증가와 함께 종파의 속도 및 초음파의 감쇠계수는 증가하였다.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.57-64
• /
• 2001

The high speed in the wire-drawing process to meet the demands for the increased productivity has a great effect on the heat generated due to plastic deformation and friction between the wire and the drawing dies. During the high carbon steel wire drawing process, the temperature rise gives a great influence to the fracture of wire. In this paper, to control the temperature rise in the wire after the deformation through the drawing die, the calculation method of the wire temperature, which includes the temperature rise in the deformation zone as well as the temperature drop in the block considering the heat transfer among the wire, cooling water and surrounding air, is proposed. These calculated results of the wire temperature at the inlet and exit of the drawing die at each pass are compared with the measured wire temperatures and verified its efficiency. So, using the program to predict the wire temperature, the isothermal pass schedule program was developed. By applying this isothermal pass schedule program to the conventional process condition, a new isothermal pass schedule is redesigned through all passes. As a result, the possibility of wire fracture could be considerably reduced and the productivity of final product could be more increased than before.

• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.99-105
• /
• 2005

The mixing ratio effect of the GTD-111(base metal) powder and the GNI-3 (Ni-l4Cr-9.5Co-3.5Al-2.5B) powder on TLP(Transient Liquid Phase) bonding phenomena and mechanism was investigated. At the mixing ratio of the base metal powder under $50wt\%$, the base metal powders fully melted at the initial time and a large amount of the base metal near the bonded interlayer was dissolved by liquid inter metal. Liquid insert metal was eliminated by isothermal solidification which was controlled by the diffusion of B into the base metal. The solid phases in the bonded interlayer grew epitaxially from the base metal near the bonded interlayer inward the insert metal during the isothermal solidification. The number of grain boundaries farmed at the bonded interlayer corresponded with those of base metal. At the mixing ratio above $60wt\%$, the base metal powder melted only at the surface of the powder and the amount of the base metal dissolution was also less at the initial time. Nuclear of solids firmed not only from the base metal near the bonded interlayer but also from the remained base metal powder in the bonded interlayer. Finally, the polycrystal in the bonded interlayer was formed when the isothermal solidification finished. When the isothermal solidification was finished, the contents of the elements in the boned interlayer were approximately equal to those of the base metal. Cr-W borides and Cr-W-Ta-Ti borides formed in the base metal near the bonded interlayer. And these borides decreased with the increasing of holding time.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.1-5
• /
• 2019

In the field of combined cycle power generation, thermal barrier coating(TBC) protects the super-heat-resistant alloy, which forms the core component of the gas turbine, from high temperature exposure. As the turbine inlet temperature(TIT) increases, TBC is more important and durability performance is also important when considering maintenance cost and safety. Therefore, studies have been made on the fabrication method of TBC and super-heat-resistant alloy in order to improve the performance of the TBC. In recent years, due to excellent properties such as high temperature creep resistance and high temperature strength, turbine blade material have been replaced by a single crystal superalloy, however there is a lack of research on TBC applied to single crystal superalloy. In this study, to understand the isothermal degradation performance of the TBC applied to the single crystal superalloy, isothermal exposure test was conducted at various temperature to derive the delamination life. The growth curve of thermally grown oxide(TGO) layer was predicted to evaluate the isothermal degradation performance. Also, microstructural analysis was performed by scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy (EDS) to determine the effect of mixed oxide formation on the delamination life.