• Title/Summary/Keyword: isolation wall

Search Result 136, Processing Time 0.032 seconds

Numerical investigation of potential mitigation measures for poundings of seismically isolated buildings

  • Polycarpou, Panayiotis C.;Komodromos, Petros
    • Earthquakes and Structures
    • /
    • v.2 no.1
    • /
    • pp.1-24
    • /
    • 2011
  • During very strong earthquakes, seismically isolated buildings may experience large horizontal relative displacements, which may lead to poundings if an insufficiently wide clearance is provided around the building. This paper investigates, through numerical simulations, the effectiveness of using rubber bumpers, which could be attached at locations where it is likely to have impacts, in order to act as shock-absorbers. For the simulation of the dynamic behavior of such rubber bumpers during impacts, a nonlinear force-based impact model, which takes into account the finite thickness of the rubber bumpers, has been developed. Subsequently, a series of parametric analyses are performed to assess the effect of the gap size, the earthquake characteristics and the thickness, compressive capacity and damping of the bumpers. The stiffness of the moat wall is also parametrically considered during poundings of a seismically isolated building, as another potential mitigation measure for poundings of seismically isolated buildings.

EFFECTS OF Pt AND Cr ADDITION ON MAGNETIC PROPERTIES IN Co-Cr-P-Pt MAGNETIC THIN FILMS

  • Sohn, H.K.;Shin, K.H.;Lee, T.D.;Kang, T.
    • Journal of the Korean Magnetics Society
    • /
    • v.5 no.5
    • /
    • pp.618-622
    • /
    • 1995
  • We studied the effects of Pt and Cr addition in a new Co-Cr-P-Pt alloy system with the coercivity higher than 2000 Oe even when they were deposited without substrate heating and bias voltage. The coercivity of the films increased from 1000 to 2000 Oe or higher by addition of 12 at.%Pt. The variation of the anisotropy field with increasing Pt content was similar to that of the coercivity. This indicate that the increase of the coercivity might be associated with increase of the anisotropy field with Pt addition. With the addition of Cr, the coercivity of the films increased up to 8 at.%Cr and the coercive squareness of the films decreased. The angular variation of coercivity deviated at a lower angle from domain wall motion mode as the Cr content increases. From these result, it is believed that the grain isolation of the films is enhanced with the addition of Cr.

  • PDF

Isolation, Culture, and Fusion of Nicotiana Protoplasts (원형질체 분리, 배양 및 Nicotiana 종간 세포융합에 관한 연구)

  • 윤경은;김준철;최상수;손세호
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.1 no.2
    • /
    • pp.138-149
    • /
    • 1979
  • For the preliminary study on tobacco cell fusion as one of new breeding techniques, the conditions that would be most effective in isolation, fusion, and culture of tobacco protoplasts were examined ; 1. The enzyme solution of 0.5% macerozyme and 2% cellulase( or meicellase) was the most economic and efficient in isolating protoplasts from tobacco leaves. 2. The proper incubation period of tobacco leaves in cell wall digesting solution was 4 hours. 3. As an osmotic stabilizer, sorbitol or mannitol solutions were employed. The concentration of 0.5~0.7 M of either hexitol gave satisfying results as the osmotic stabilizer. 4. The calcium concentration appeared to be an important factor in protoplast fusion. The adhesion of protoplasts was enhanced by enrichment of calcium ion in PEG solution. The highest frequency of protoplast fusion was obtained when tobacco protoplasts were incubated in PEG solution. containing 9mM CaCl2. 5. Cell divisions of the isolated protoplasts were continued and have generated colonies when they were grown on B-5 medium at 28$^{\circ}C$.

  • PDF

The Conidial Protoplast Fusion of Cellulolytic Fungus Trichoderma koningii (섬유소 분해균인 trichoderma koningii의 분생자 원형질체 융합에 관하여)

  • 홍순우;하영칠;박희문
    • Korean Journal of Microbiology
    • /
    • v.22 no.4
    • /
    • pp.207-214
    • /
    • 1984
  • Improved methods for the isolation and purification of conidial protoplast were investigated and conidial proplast from auxotrophic mutants were fused. The reaction time for isolation of protoplasts from the swollen condiospores preincubated in liquid minimal medium supplimented with 2-deoxy-D-glucose was shorten by reaction with mixture of 2% driselase and 2% ${\beta}-glucuronidase$ (1:1). The conidial protoplast could be highly purified by using 5% Ficoll 400 as a centrifugation medium. Nucleus of the conidial protoplast was stained with Giemsa stain and the conidial protoplast had one nucleus. It was also confirmed that the conidial protoplast was true protoplast with no cell wall remnant at the outside of plasma menbrane. Fusion frequencies of the conidial protoplast from auxotrophic mutants ranged from $3.4{\times}10^{-1}\;to\;4.9{\times}10^{-1}$. These values were higher than those of mycelial protoplast by a factor of 5 to 28.

  • PDF

An Analysis on the Effect of Application on Vibration Isolation Liner of Elevator Guide Rail Bracket (엘리베이터 가이드 레일 브라켓의 방진라이너 적용효과에 관한 분석)

  • Roh, Seung-Kwon;Kim, Eundo;Oh, Jong-Seok;Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.10 no.8
    • /
    • pp.145-151
    • /
    • 2019
  • In this study, the effects were analyzed by applying the vibration absorption liner into the guide rail bracket as a part of method to reduce the vibration and noise on the high-rise apartment. As the result of vibration absorption liner performance, it was checked that the level of vibration and noise was reduced around 65.49% in the car side and around 90.05% in the counterweight side. Therefore, the vibration absorption effect by the vibration absorption liner of elevator guide rail bracket became fairly good. In case of the vibration absorption liner application, there was an effect on the reduction of 7.26 to 22.22% at hoistway section area, 3,840,000 to 9,780000 KRW at the cost of material and installation by comparing with the damping beam application. Also, in case of the vibration absorption liner application with light weight instead of damping beam with heavy weight, it was thought to become significant effect at preventing the safety from the accidents on installation site.

Development of Cell Lines for Application of Recombinant DNA Techniques in Crops (작물의 유전자 재조합을 위한 세포주의 개발 연구)

  • Chae, Young-Am;Choi, Kyu-Whan
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.30 no.2
    • /
    • pp.195-200
    • /
    • 1985
  • This experiment was carried out to know the processes of protoplast isolation, culture and plant regeneration in aims of introducing foreign genes into plant cells through plant gene vector, and cellular selection for plant improvement. The main results indicated that 2% cellulase plus 0.5% macerozyme is proper for isolation of protoplasts from leaf mesophyll cells of N. plumbaginifolia, plating efficiency was higher in 1.4-2.0 x 10$^4$ cells/ml, complete cell wall was regenerated after 2 days culture, cell division and cell mass were observed after 4 days and 2 weeks, respectively, colony was developed after 3 weeks culture, addition of 1-2mg/l BA promoted shoot differentiation while root differentiation did not required hormone and seeds were harvested from more than 100 cell lines for further investigation and study.

  • PDF

The Influence of Simplified Surgical Procedures on the Surgical Treatment for Atrial Fibrillation with using the Cut-and-Sew Technique (절개봉합법을 이용한 심방세동 수술의 중단기 결과)

  • Choi, Jong-Bum;Kim, Jong-Hun;Lee, Mi-Kyung;Lee, Sam-Youn;Kim, Min-Ho;Kim, Kong-Su
    • Journal of Chest Surgery
    • /
    • v.41 no.3
    • /
    • pp.313-319
    • /
    • 2008
  • Background: The Cox maze-III procedure is considered as the most effective surgical treatment for atrial fibrillation. Because this procedure takes a long time and it complicates the concomitant cardiac surgery, some surgeons perform a left atrial maze procedure or pulmonary vein isolation only to reduce the operation time. This study was performed to evaluate how the modified procedures, with using cut-and-sew techniques, can influence the treatment of atrial fibrillation. Material and Method: Between Feb 1999 and June 2005, 40 patients (17 males and 23 females) with organic heart disease and atrial fibrillation underwent the Cox maze-III procedure (23), the left atrial maze procedure (10) or pulmonary vein isolation (7). The cut-an-sew technique was used to ablate the atrial wall, but cryoablation was used instead of the cut-and-sew technique for the coronary sinus and the inferior wall between the pulmonary vein and the mitral annulus. Result: After a mean follow-up period of $50.0{\pm}21.6$ months, all (100%) of the 23 patients who underwent the Cox maze-III procedure had regular sinus or atrial rhythm conversion, and 7(70%) of 10 with a left atrial maze procedure and 4(57.1%) of 7 with pulmonary vein isolation had regular sinus or atrial rhythm conversion (p=0.002). Conclusion: To obtain a high conversion rate from atrial fibrillation to a regular sinus rhythm or a regular atrial rhythm, the standard Cox maze-III procedure should be performed in both atria. The limited modified procedures like the left atrial maze procedure or pulmonary vein isolation may reduce the cure rate of atrial fibrillation.

Improvement of Insulation System for LNG Storage Tank Base Slab (LNG 저장탱크 바닥판 단열 시스템 개선)

  • Lee, Yong-Jin;Lho, Byeong-Cheol
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.14 no.4
    • /
    • pp.141-147
    • /
    • 2010
  • Liquefied natural gas(LNG) is natural gas that has been converted temporarily to liquid form for ease of storage and transport it. Natural gas is the worlds cleanest burning fossil fuel and it has emerged as the environmentally preferred fuel of choice. In Korea, the demand of this has been increased since the first import from the Indonesia in 1986. LNG takes up about 1/600th the volume of natural gas in the gaseous state by cooling it to approximately $-162^{\circ}C(-260^{\circ}F)$. The reduction in volume therefore makes it much more cost efficient to transport and store it. Modern LNG storage tanks are typically the full containment type, which is a double-wall construction with reinforced concrete outer wall and a high-nickel steel inner tank, with extremely efficient insulation between the walls. The insulation will be installed to LNG outer tank for the isolation of cryogenic temperature. The insulation will be installed in the base slab, wall and at the roof. According to the insulation's arrangement, the different aspects of temperature transmission is shown around the outer tank. As the result of the thermal & stress analysis, by the installing cellular glass underneath the perlite concrete, the temperature difference is greatly reduced between the ambient temperature and inside of concrete wall, also reducing section force according to temperature load.

Isolation of Streptomyces sp. YU100 Producing Extracellular Phospholipase D

  • Lim, Si-Kyu;Choi, Jae-Woong;Lee, Eun-Tag;Khang, Yong-Ho;Kim, Sang-Dal
    • Journal of Microbiology and Biotechnology
    • /
    • v.12 no.1
    • /
    • pp.71-76
    • /
    • 2002
  • Soil samples were screened for actinomycete strains capable of producing phospholipase D, and a strain, Streptomyces sp. YU100, showing a high transphosphatidylation activity was isolated. This strain secreted phospholipase D in a culture broth after 12 h of cultivation, and its productivity continued to increase for 36 h of fermentation. In addition, its transphosphatidylation rate of phosphatidylcholine to phosphatidylserine was almost $68\%$ within 1 h. The morphological and chemotaxonomical characteristics showed that this strain could be classified as a number of the Streptomycetaceae family, particularly due to the spiral form of its spore chain consisting of 60-70 smooth spores $(0.75{\times}1.0{\mu}m$) on an aerial mycelium, FA-2c type of fatty acid profile in the cell wall, and LL-DAP component in the cell wall peptidoglycan. A phylogenetic analysis of the 16S rDNA provided a clue that the strain YU100 was actually a member of the genus Streptomyces, because the determined sequence exhibited a higher homology with Streptomyes sp. ASB27, S. peucetius JCM9920, and S. griseus ATCC10137. A dendrogram based on the 16S rDNA sequences also showed a phylogenetic relationship between the strain YU100 and these strains. However, the strain YU100 has not yet been assigned to a particular species, because of absence of any other classified species with a high matching score.

ADVANCED DVI+

  • Kwon, Tae-Soon;Lee, S.T.;Euh, D.J.;Chu, I.C.;Youn, Y.J.
    • Nuclear Engineering and Technology
    • /
    • v.44 no.7
    • /
    • pp.727-734
    • /
    • 2012
  • A new advanced safety feature of DVI+ (Direct Vessel Injection Plus) for the APR+ (Advanced Power Reactor Plus), to mitigate the ECC (Emergency Core Cooling) bypass fraction and to prevent switching an ECC outlet to a break flow inlet during a DVI line break, is presented for an advanced DVI system. In the current DVI system, the ECC water injected into the downcomer is easily shifted to the broken cold leg by a high steam cross flow which comes from the intact cold legs during the late reflood phase of a LBLOCA (Large Break Loss Of Coolant Accident)For the new DVI+ system, an ECBD (Emergency Core Barrel Duct) is installed on the outside of a core barrel cylinder. The ECBD has a gap (From the core barrel wall to the ECBD inner wall to the radial direction) of 3/25~7/25 of the downcomer annulus gap. The DVI nozzle and the ECBD are only connected by the ECC water jet, which is called a hydrodynamic water bridge, during the ECC injection period. Otherwise these two components are disconnected from each other without any pipes inside the downcomer. The ECBD is an ECC downward isolation flow sub-channel which protects the ECC water from the high speed steam crossflow in the downcomer annulus during a LOCA event. The injected ECC water flows downward into the lower downcomer through the ECBD without a strong entrainment to a steam cross flow. The outer downcomer annulus of the ECBD is the major steam flow zone coming from the intact cold leg during a LBLOCA. During a DVI line break, the separated DVI nozzle and ECBD have the effect of preventing the level of the cooling water from being lowered in the downcomer due to an inlet-outlet reverse phenomenon at the lowest position of the outlet of the ECBD.