• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.46-52
• /
• 2009

Purpose: To evaluate the usefulness of minimally invasive arthroscopy-assisted plate removal of a laterally inserted periarticular distal femur plate used for the treatment of AO type-C distal femur fractures. Materials and Methods: From October 2002 to November 2005, we evaluated 17 patients whose plates were removed through minimally invasive arthroscopy-assisted plate-removal technique and 15 patients who got their plates removed through conventional method without using arthroscopy, 32 patients in total. All these patients included in this study initially underwent open reduction and internal fixation of the distal femoral fractures with a lateral plate, and complained of continued pain over the lateral femoral condyle after the fracture fixation. The average age was 42.6 (ranges: 20~66) and initial fracture types included 16 cases of C1, 11 cases of C2, and 5 cases of C3 following AO/ASIF classification guidelines. Measured outcomes included: associated intra-articular pathologies, time needed to return to activities of daily living, patients' overall satisfaction, complications following the removal of hardware, and pain before and 6 months after the operation. Results: The distal-most end of the plate was placed in the knee joint in all cases and damage of the lateral articular capsule was found in 23 cases. Continuous wound discharge after surgery was found in one case who underwent arthroscopy-assisted plate removal, and it was treated by irrigation and re-suture. Average time needed to return to activities of daily living was 7 days in arthroscopy assisted group and 7.6 days in conventionally removed group. Fourteen patients (82.4%) who underwent arthroscopyassisted plate-removal reported above 'fair' satisfaction and the Visual analog scale pain score decreased from 4.9 to 1.9, six months after the plate removal. Thirteen patients(86.7%) who underwent conventional plate removal reported above 'fair' satisfaction and the Visual analog scale pain score decreased from 5.2 to 2.5, six months after the operation. Conclusion: Through minimally invasive arthroscopic-assisted plate removal, intrarticular pathology of the knee joint was able to be simultaneously identified and treated at the time of hardware removal. Damage of lateral capsule of the knee joint caused by the inserted plate for the treatment of type C distal femoral fracture was very frequently found and following the plate removal, patients experienced an improvement in pain score. We therefore recommend routine lateral distal femoral plate removal if the bony union is attained in such cases as type C distal femoral fractures whose distal most end of the plates are located in the joint.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.1
• /
• pp.32-38
• /
• 2007

Purpose: This study reports the clinical results of the arthroscopic repair of type V SLAP lesion with bio-knotless anchor. Materials and Methods: 10 cases of 10 patients (10 male) were included in this study. The average age was 32.7 years old and the period from the first injury to operation was average 47.2 months. Preoperative Rowe score was average 37.5. Arthroscopic SLAP repair with 1 or 2 bio-knotless anchors were performed and arthroscopic Bankart repair with bio-knotless anchors were performed in all cases; 3 anchors were used in 7 cases and 2 anchors in 3 cases. The average follow up period was 15.7 months. Results: The Rowe score improved to 93 at last follow up period and 8 cases had full range of motion of the shoulder. 2 case had mild limited range of motion of the shoulder (one case; 170 degrees in flexion, 60 degrees in external rotation and T12 level in internal rotation, the other case; 160 degrees in flexion, 45 degrees in external rotation and T12 level in internal rotation.) without any problem in normal activity. Conclusion: Arthroscopic repair with bio-knotless anchor in type V SLAP lesion is one of the good methods because of the good clinical results.

• The Journal of Society for e-Business Studies
• /
• v.8 no.2
• /
• pp.99-111
• /
• 2003

By virtue of diverse advantages derived from digital media, eBook is getting started to use. And many market research agencies have predicted that its market will be greatly expanded soon. But against those expectations, copyright-related problems and the difficulties of its accessing inherited from various eBook content formats become an obstacle to its diffusion. The first problems can be solved by DRM technology. And to solve the second problems, each nation has published its own content standard format. But the domestic standards are useful only the domestic level, they still leave the problems in the national level. The variety of content formats has created a demand for mechanisms that allow the exchange of eBook contents. Therefore we study the mapping relations between eBook contents for conversion. To define the mapping relations, first we extract the mapping both between eBook contents and between normal XML documents. From those mappings, we define seven mapping relations and classify them by cardinality. And we analyze the classified relations, which can be generated by automatic, or not. Using these results, we also classify the eBook content conversion as automatic, semi-automatic, and manual. Besides, we provide the conversion templates for mapping relations for automatic generation of conversion scripts. To show the feasibility of conversion templates, we apply them to the eBook content conversion. Experiment shows that our conversion templates generate the conversion scripts properly. We expected that defined mapping relations and conversion templates can be used not only in eBook content conversion , but also in normal XML document conversion.

• Journal of Acupuncture Research
• /
• v.19 no.2
• /
• pp.51-64
• /
• 2002

We have compared(using the same series of experimental tissue samples) the levels of proteolytic enzyme activities and free radical-induced protein damage in synovial fluid from RA and CPH cases. Many protease types showed significantly increased (typically by a factor of approximately 2-3-fold) activity in RA, compared to normal rats. However, CPH significantly reduced the cytoplasmic enzyme activities of arginyl aminopeptidase, leucyl aminopeptidase, pyroglutamyl aminopeptidase, tripeptidyl aminopeptidase, and proline endopeptidase to almost about 1/10 each. For the Iysosomal proteases, synovial fluid samples from RA rats, CPH significantly reduced the enzyme activities of cathepsin B, dipeptidyl aminopeptidase I and dipeptidyl aminopeptidase II. In extracellular matrix degrading(collagenase, tissue elastase) and leukocyte as sociated proteases (leukocyte elastase, cathepsin G), CPH decreased these enzyme activities of collagenase, tissue elastase and leukocyte associated elastase in RA. In cytoplasmic and lysosomal protease activities in plasma from RA. CPH and normal plasma samples were not significantly different, suggesting that altered activity of plasma proteases (particularly those enzymes putatively involved in the immune response) is not a contributory factor in the pathogenesis of RA. In addition, the level of free radical induced damage to synovial fluid proteins was approximately twice that in RA, compared with CPH. CPH significantly decreased the level of ROS induced oxidative damage to synovial fluid proteins (quantified as protein carbonyl derivative). Therefore we conclude that both proteolytic enzymes and free radicals are likely to be of equal potential importance as damaging agents in the pathogenesis of inflammatory joint disease, and that the design of novel therapeutic strategies for patients with the latter disorder should include both protease inhibitory and free radical scavenging elements. In addition, the protease inhibitory element should be designed to inhibit the action of a broad range of protease mechanistic types (i.e. cysteine-, metallo- and serine- proteinases and peptidases). However, increased protein damage induced by ROS could not be rationalised in terms of compromised antioxidant total capacity, since the latter was not significantly altered in RA synovial fluid or plasma compared with CPH.

• Journal of Acupuncture Research
• /
• v.26 no.3
• /
• pp.67-80
• /
• 2009

Objectives : The purpose of this survey is the development on the neck pain for acupuncture and moxibustion clinical guideline. Methods : The survey questionnaire was developed by the committee of experts who major in acupuncture & moxibustion or statistics for acupuncture clinical trial protocol development. The questionnaires were distributed via e-mail to 75 members of Korean Acupuncture & moxibustion society. 57 members completed answers, and the computerized data were analyzed by SPSS 17.0 statistical program. Results and Conclusions : 1. The first selected pattern identification on the neck pain This study shows that the meridian pattern identification was selected 35 times(61.4%), the pattern identification based on cause of disease was selected 8 times(14.0%), the visceral pattern identification was selected 7 times(12.3%), the other pattern identification was selected 4 times(7.0%), Qi blood yin yang pattern identification was selected 2 times(3.5%), according to symptoms was selected 1 time(2.4%). 2. Meridian pattern identification Small intestine meridian of hand Taeyang was used 39 times(18.1%), Large intestine meridian of hand Yangmyeong and Bladder meridian of foot Taeyang was used 34 times(15.7%), Gall-bladder meridian of foot Soyang was 32 times(14.8%), Tripple energizer meridian of hand Soyang was used 31 times(14.4%), Governor meridian was used 30 times(13.9%), Lung meridian of hand Taeeum was used 8 times(3.7%), Heart meridian of hand Soeum and Pericarduim meridian of hand Gworeum was used 4 times(1.9%). 3. Pattern identification based on cause of disease Wind-Cold-Dampness was used 31 times(17.5%), Accumulation of the collateral by Phelgm-Dampness was used 16 times(14.0%), affection by exopathogen Wind-Cold(stiff neck, sprain of cervical) was used 13 times (11.4%), Defecient-Cold was used 10 times(8.8%), affection by exopathogen Wind-Dampness was used 9 times(7.9%), Deep Invasion by Wind-Cold was used 8 times(7.0%), Wind-Cold was used 7 times (6.1%), Wind-Cold was used 6 times(5.3%), Accumulation in the Center by Phelgm-Dampness, Imparement of bou fluid by Pathogenic Heat, Wind-Heat with Dampness was used 5 times(4.4%), affection by exopathogen Wind-Dampness and Accumulation of the collateral by Wind-Cold was used 4 times(3.5%), Invasion of Dampness-Heat was used 2 times(1.8%). 4. Visceral pattern identification Rising of the Liver yang was used 16 times(41%), Yin deficiency of Liver and Kidney+pathogens was used 15 times(38.5%), Yin deficiency of Liver and Kidney was used 8 times(20.5%) on this survey.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.497-507
• /
• 1996

The aim of present study in vitro was to evaluate and compare the effects of different washing times of enamels etched with low phosphoric acid solution which makes unsoluble salts and etched but contaminated with saliva on shear bond strength of an orthodontic adhesive to enamel, and to observe the washing effect on the etched enamel surface by scanning electron microscope. All brackets were bonded with Mono-$Lok2^{TM)}$) on the labial surface of extracted human bicuspids after etching with $20w/w\%\;and\;37w/w$ and phosphoric acid solution for 60seconds and then washing for 0,5,10 and 20seconds respectedly. After etching with $37w/w\%$ phosphoric acid solution and contaminating with saliva for 30seconds and then washing for 0,5,20 and 30seconds and re-etching for 10seconds. After 24hours passed in the $37^{\circ}C$ water bath, the shear bond strengths were measured on Universal Test Machine. The data were evaluated and tested by ANOVA and Duncan's multiple range test, and those results were as follows. 1. There was no significant differences between (p>0.05) shear bond strength of bonded brackets with 5, 10, 20seconds washing etched enamel using $37{\%}w/w{\%}$ phosphoric acid solution. 2. The shear bond strength of bonded brackets with $20w/w\%$ phosphoric acid and then washing for 5seconds showed bonded strength durable to occlusal force but its coefficiency score was high and etched surface was not cleaned completely and therefore it was assumed that its clinical application is not applicable. 3. There was no significant differences between (p>0.05) shear bond strengths of bonded brckets with washing for 5seconds etched enamel using $37w/w\%$ phosphoric acid solution and 10,20 seconds washing etched enamel using $20w/w\%$ phosphoric acid solution. 4. The shear bond strength of washing for 5seconds etched enamel which was contaminated with saliva showed sufficient bonded strength durable to occlusal force but its coefficiency score was high and therefore its clinical application was not applicable. 5. After etching, the sample contaminated with saliva showed the sufficient shear bond strength even washing 20seconds without re-etching.

• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.178-187
• /
• 2006

The present study was performed to evaluate the stress distribution on the diameter of the mini-implant and insertion angle to the bone surface. To perform three dimensional finite element analysis, a hexadron of $15{\times}15{\times}20mm^3$ was used, with a 1.0 mm width of cortical bone. Mini-implants of 8 mm length and 1.2 mm, 1.6 mm, and 2.0 mm in diameter were inserted at $90^{\circ},\;75^{\circ},\;60^{\circ},\;45^{\circ},\;and\;30^{\circ}$ to the bone surface. Two hundred grams of horizontal force was applied to the center of the mini-implant head and stress distribution and its magnitude were analyzed by ANSYS, a three dimensional finite element analysis program. The findings of this study showed that maximum von Mises stresses in the mini-implant and cortical and cancellous bone were decreased as the diameter increased from 1.2 mm to 2.0 mm with no relation to the insertion angle. Analysis of the stress distribution in the cortical and cancellous bone showed that the stress was absorbed mostly in the cortical bone, and little was transmitted to the cancellous bone. The contact area increased according to the increased diameter and decreased insertion angle to the bone surface, but maximum von Mises stress in cortical bone was more significantly related with the contact point of the mini-implant into the cortical bone surface than the insertion angle to the bone surface. The above results suggest that the maintenance of the mini-implant is more closely related with the diameter and contact point of the mini-implant into the cortical bone surface rather than the insertion angle.

• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.188-197
• /
• 2006

Fiber reinforced composite (FRC) is usually used as a connector joining a few teeth into one unit in orthodontics. However, fracture often occurs during the two to three years of the orthodontic treatment period due to repeated occlusal loading or water sorption in the oral environment. We simulated the repair by overlapping and attaching portions of two FRC strips in the middle and performed a three-point bending test to investigate the changes of the repair strength among the different FRC groups. The specimens were grouped according to the overlapping lengths of the two FRC strips, which were 1, 2, 3 and 4 mm (group E1, E2, E3 and E4, respectively) and the control group consisted of unrepaired, intact FRC strips. Each group consisted of 6 specimens and were cured with a light emitting diode curing unit. Group E4 showed the highest maximum loads of 2.67 N, then the control group (2.39 N), group E3 (2.35 N), E2 (2.10 N), and E1 (1.75 N) in decreasing order. Group E4 also showed the highest stiffness, which was 2.32 N/mm, however, the stiffness of group E3 (2.06N/mm) was higher than that of the control group (1.88 N/mm). According to the visual examination, the specimens tended to be bent rather than being fractured into two pieces with an increased length of overlapping portions. The above results suggest that a minimum overlapping length of 3 mm was necessary to obtain an adequate repair of a 10 mm length of FRC connector. In addition, the critical section adjacent to the joint area, where the thickness decreased abruptly, should be reinforced with flowable resin to minimize the bending tendency.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.469-485
• /
• 1996

Orthodontic patients are individuals that grow and develop ; therefore selection of the proper time for orthodontic treatment is considered to be one of most difficult and yet difficult factor. Since the development of cephalometric X-ray, amount and Pattern of craniofacial growth change with aging could be predicted and be came useful in the process of orthodontic treatment. The relationship between the mean values of cephalometric measurements and body height and weight was studied among the groups(boys and girls) of Korean children from the ages 6-years to 17-years. 409 boys and 437 girls with no abnormality in growth and development and no history of orthodontic treatment from the ages of 6 years to 17 years were chosen as subjects Cephaloment X-ray were taken for 3 years and hard tissue analysis based on Burstone's COGS, which was devided into measurements of 6 parts(Cranial base, Maxillar and Mandible, Dental measurements). The relationship between craniofacial growth and height & weight was studied. The following conclusions were obtained : 1. The maximum growth in the measurements of cranial base, N-Ar(FH), N-Ba(FH) corresponded with the age with the maximum increase in body height & weight in both boys and girls. 2. Genial angle gradually decreased with aging in both boys and girls. 3. N-ANS(L) showed greater amount of growth than ANS-Ne(L), and this had greater influence on facial profile. 4. N-A-$Pog^{\circ}$ decreased with aging, and mandibular growth exceeded maxillary growth in amount and rate. 5. Length of Y-axis Increased, but Y-axis to FH plane remained constant. This show that mandible grows at a constant angulation to cranial base. 6. As permanent teeth erupt, interincisal angle deceased.

• The korean journal of orthodontics
• /
• v.26 no.1 s.54
• /
• pp.65-82
• /
• 1996

This study was carried out to study the changing patterns in muscle activities in Angle's II and Class III malocclusion patients following activator therapy, To study the activities of anterior temporal(T.A.), masseter(M.M.), posterior temporal(T.P.), and anterior belly of digastric(D.A.) muscles, surface electrodes were placed on 15 Angle's Class II and 17 Angle's Class III malocclusion patients and following conclusions were obtained after electromyographic recordings were taken at prior to the activator therapy and at some time between 6 -12 month after the start of activator therapy. 1. Class II and Class III malocclusion groups, when compared to normal occlusiongroup, showed no significant differences during resting and swallowing. But significant differences were observed in masseter and posterior temporal muscles during clenching. 2. Most of the muscles studied showed a certain pattern, that is those groups whose pre-treatment E.M.G. were lower than the normal value showed significant increase after activator therapy, whereas those groups whose pre-treatment E.M.G. were higher than the normal value showed significant decrease after activator therapy. This pattern was observed in all of the muscle groups studied except T.A.(swallowing), T.P.(clenching) and D.A.(swallowing, clenching) in Angle's Class III malocclusion group and in Angle's Class II malocclusion group, above tendency were observed only in T.A.(swallowing), M.M.(resting, swallowing) and T.P.(clenching). This pattern was less obvious during clenching. 3. When E.M.G. activity after activator therapy between Angle's Class II and Class III malocclusion group was compared, Class III malocclusion group showed more increase during resting, and Class II malocclusion group showed more increase during swallowing and clenching excepting M.M. and D.A. respectively.