• 제목/요약/키워드: irregularity of frequency

검색결과 77건 처리시간 0.038초

웨이브렛 전달함수를 이용한 궤도틀림 추정 (Estimation of rail irregularity using wavelet transfer function)

  • 윤석준;최배성;이형진;김만철;최성훈;신수봉
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.330-337
    • /
    • 2010
  • This paper shows an algorithm for identifying track irregularities using wavelet transfer function along the railway. An equivalent SISO wavelet transfer function is defined using continuous wavelet transform by the measured track geometry and acceleration at a bogie of a train. The estimated track geometry is made by inverse continuous wavelet transform from the regressed signals of measured acceleration signal and the pre-defined wavelet transfer function. The estimated rail irregularity geometry is evaluated by the coherence function and comparison of FRF(Frequency Response Function). As a result of evaluated outcome, This algorithm is regarded as appropriate for estimation of rail irregularity.

  • PDF

축상 진동가속도계를 이용한 궤도불규칙의 간이검측에 관한 연구 (On a Simplified Measurement of Rail Irregularity by Axle-box Accelerometers)

  • 이준석;최성훈;김상수;박춘수
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.989-995
    • /
    • 2010
  • This paper is focused on a simplified measurement of rail irregularity by some axle-box accelerometers for high-speed rail condition monitoring with in-service high-speed trains. Generally, the rail condition monitoring has been done by a special railway inspection vehicle with a 10m versine method. But, the monitoring method needs some expensive measurement system, and have been performed only at night due to its speed limit. In this research, a simplified measurement of rail irregularity using axle-box accelerometers is proposed to monitor the rail condition with in-service high-speed trains. The acceleration is measured by using two accelerometers on a axle-box, and stored in an on-board data acquisition system. The displacement is estimated from the acceleration data by a combination of Kalman filter and the frequency selective filter. The estimated results are compared with the measurement from a laser rail inspection system which is near the axle-box. From the comparison, the proposed method shows promise as a tool for the simplified measurement of rail irregularity at high-speed.

  • PDF

주파수영역 전달함수를 이용한 궤도틀림 식별 (Identification of Track Irregularity by Frequency-Domain Transfer Function)

  • 김재천;권순정;윤경림;이형진;김만철;신수봉
    • 한국철도학회논문집
    • /
    • 제12권4호
    • /
    • pp.506-511
    • /
    • 2009
  • 본 연구에서는 대차에서 계측한 가속도 데이터를 사용하여 궤도틀림을 식별하기 위한 알고리즘을 제안하였다. 등가 SISO 모델에 의한 정상궤도틀림 상태에서의 대차진동과 궤도틀림과의 주파수영역 전달함수를 정의하고, 이를 역으로 이용하여 대차에서 계측한 가속도 데이터로 궤도틀림을 예측하였다. 예측된 값과 기준값과의 잔차의 분산 비로정의되는 틀림지수를 사용하여 궤도틀림의 이상을 분석하였다. 궤도틀림을 시간에 따라 변하는 변위 경계조건으로 고려하여 3차원 수치예제를 수행하였으며, 제안된 알고리즘의 타당성을 검증하였다.

대차 관성측정 장치에서 궤도틀림 추정을 위한 반복 최소자승법의 적용 (Application of Recursive Least Squares Method to Estimate Rail Irregularities from an Inertial Measurement Unit on a Bogie)

  • 이준석;최성훈;김상수;박춘수
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 춘계학술대회 논문집
    • /
    • pp.427-434
    • /
    • 2011
  • This paper is focused on application of recursive least squares method to estimate rail irregularities from the acceleration measurement on an axle-box or a bogie for the rail condition monitoring with in-service high-speed trains. Generally, the rail condition was monitored by a special railway inspection vehicle but the monitoring method needs an expensive measurement system. A monitoring method using accelerometers on an axle-box or a bogie was already proposed in the previous study, and the displacement was successfully estimated from the acceleration data by using Kalman and frequency selective band-pass filters. However, it was found that the displacement included not only the rail irregularities but also phase delay of the applied filters, and effect of suspension of the bogie and conicity of the wheel. To identify the rail irregularities from the estimated displacement, a compensation filter method is proposed. The compensation filters are derived by using recursive least squares method with the estimated displacement as input and the measured rail irregularity as output. The estimated rail irregularities are compared with the true rail irregularity data from the rail inspection system. From the comparison, the proposed method is a useful tool for the measurement of lateral and vertical rail irregularity.

  • PDF

웨이브렛 전달함수를 이용한 궤도틀림 식별 (Identification of Track Irregularity using Wavelet Transfer Function)

  • 신수봉;이형진;김만철;윤석준
    • 한국철도학회논문집
    • /
    • 제13권3호
    • /
    • pp.304-308
    • /
    • 2010
  • 본 연구에서는 웨이브렛 변환을 이용하여 궤도틀림을 식별하는 방법을 제시하였다. 궤도틀림과 대차 가속도응답신호에 의한 등가 웨이브렛 SISO 전달함수를 정의하였다. 현장에 적용되는 검측차의 25cm단위 궤도검측 기준에 맞추어 궤도틀림과 대차가속도 응답신호를 조정하였다. 웨이브렛 변환을 적용하기 전 입력데이터는 웨이브렛 변환 정의 조건에 맞추어 범위를 재조정한 회귀신호이다. 또한, 웨이브렛 역전 달 함수를 정의하여, 궤도틀림을 역 추정하였다. 추정된 궤도틀림과 실제의 궤도틀림의 비교를 위해 상관도와 FRF를 비교 분석하였다. 예측된 값과 기준 값 과의 잔 차의 분산비로 정의되는 틀림지수를 사용하여 궤도틀림의 이상을 분석하였으며, 개발될 알고리즘을 검증하기 위하여 시뮬레이션 연구를 수행하였다.

차량의 동적 특성 분석을 통한 궤도틀림 식별 (An Identification of Track Irregularity by Analyzing Dynamic Characteristics of a Train)

  • 김성용;박은천
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2010년도 춘계학술대회 논문집
    • /
    • pp.2095-2106
    • /
    • 2010
  • In this study, to grasp the stability of train and to identify the track irregularity, the algorithm was proposed. As the track deformation occur due to running train, the dynamic characteristics of train show non-linearity. The representative transfer functions of wheel to car response were calculated from the frequency response functions which were estimated from measured triaxial accelerations. The measured acceleration responses were compared with the estimated responses from filtered acceleration outputs. This result could show the non-linearity of train system at the location of track deformed. The proposed algorithm was verified by matching with the site investigation.

  • PDF

FEM과 BEM을 이용한 한국형 고속전철의 전동소음 예측 (Prediction of Rolling Noise of Korean Train Express Using FEM and BEM)

  • 김관주
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.555-564
    • /
    • 2001
  • Wheel-rail noise is normally classified into three catagories : rolling, squeal and impact noise. In this paper, rolling noise caused by the irregularity between a wheel and rail is analysed as follows: The irregularity between the wheel and rail is assumed as combination of sinusoidal profiles. Wheel-rail contact stiffness is linearized by using Hertzian contact theory, and then contact force between the wheel and rail is calculated. Vibration of the rail and wheel is calculated theoretically by receptance method or FEM depending on the geometry of wheel or rail for the frequency range of 100-5000Hz, important for noise generation. The radiation caused by those vibration is computed by BEM. To verify this analysis tools, rolling noise is calculated by preceding analysis steps using typical roughness data and it is compared with experimental rolling noise data. This analysis tools show reasonable results and used for the prediction of KTX rolling noise.

  • PDF

정상 에르고드성을 가지는 확률과정 스펙트럼에 대한 합리적 시계열 데이터 확보 (Data Acquisition of Time Series from Stationary Ergodic Random Process Spectrums)

  • 박준범;김경수;정준모;김재우;유창혁;하영수
    • 한국해양공학회지
    • /
    • 제25권2호
    • /
    • pp.120-126
    • /
    • 2011
  • The fatigue damages in structural details of offshore plants can be accumulated due to various environmental loadings such as swell, wave, wind and current. It is known that load histories acting on mooring and riser systems show stationary and ergodic bimodal wide-banded process. This paper provides refined approach to obtain time signals representing stress range histories from wide-banded bimodal spectrum which consists of ideally narrow-banded and fully separated two spectrums. Variations of the probabilistic characteristics for time signals according to frequency and sampling time increments are compared with the reference data to be the probabilistic characteristics such as zero-crossing period, peak period, and irregularity factor obtained from an assumed ideal spectrum. It is proved that the sampling time increment more affects on the probabilistic characteristics than frequency increment. The fatigue damages according to the frequency and sampling time increments are also compared with the ones with minimum increment condition which are thought to be exact fatigue damage. It is concluded that the maximum sampling time increment to obtain reliable time signals should be determined that ratio of applied maximum sampling time increment and minimum period is less than approximately 0.08.

9.12 경주지진 및 11.15 포항지진의 구조손상 포텐셜 비교연구 (Comparative Analysis of Structural Damage Potentials Observed in the 9.12 Gyeongju and 11.15 Pohang Earthquakes)

  • 이철호;김성용;박지훈;김동관;김태진;박경훈
    • 한국지진공학회논문집
    • /
    • 제22권3호
    • /
    • pp.175-184
    • /
    • 2018
  • In this paper, comparative analysis of the 9.12 Gyeongju and 11.15 Pohang earthquakes was conducted in order to provide probable explanations and reasons for the damage observed in the 11.15 Pohang earthquake from both earthquake and structural engineering perspectives. The damage potentials like Arias intensity, effective peak ground acceleration, etc observed in the 11.15 Pohang earthquake were generally weaker than those of the 9.12 Gyeongju earthquake. However, in contrast to the high-frequency dominant nature of the 9.12 Gyeongju earthquake records, the spectral power of PHA2 record observed in the soft soil site was highly concentrated around 2Hz. The base shear around 2 Hz frequency was as high as 40% building weight. This frequency band is very close to the fundamental frequency of the piloti-type buildings severely damaged in the northern part of Pohang. Unfortunately, in addition to inherent vertical irregularity, most of the damaged piloti-type buildings had plan irregularity as well and were non-seismic. All these contributed to the fatal damage. Inelastic dynamic analysis indicated that PHA2 record demands system ductility capacity of 3.5 for a structure with a fundamental period of 0.5 sec and yield base shear strength of 10% building weight. The system ductility level of 3.5 seems very difficult to be achievable in non-seismic brittle piloti-type buildings. The soil profile of the PHA2 site was inversely estimated based on deconvolution technique and trial-error procedure with utilizing available records measured at several rock sites during the 11.15 Pohang earthquake. The soil profile estimated was very typical of soil class D, implying significant soil amplification in the 11.15 Pohang earthquake. The 11.15 Pohang earthquake gave us the expensive lesson that near-collapse damage to irregular and brittle buildings is highly possible when soil is soft and epicenter is close, although the earthquake magnitude is just minor to moderate (M 5+).

정상인과 후두폴립환자에서의 음성학적 측정 (Acoustic Measures from Normal and Vocal Polyp Patients)

  • 최홍식;장미숙;이정준
    • 대한후두음성언어의학회지
    • /
    • 제5권1호
    • /
    • pp.38-43
    • /
    • 1994
  • Though normal vocal cords show regular vibration, pathologic vocal cords show irregularity between peaks. Jitter means fluctuation in the time interval between peaks, and Shimmer means cycle to cycle variation in the amplitude of the peaks. We investigated the vocal vibration of Korean normal persons objectively. The fundamental frequency, Jitter, Shimmer and SNR(signal to noise ratio) of normal persons were compared with that of vocal Polyp Patients with CSpeech Program for the possibility of distinguishing the pathologic vocal vibration from normal. The results were as follows ; Comparing the fundamental frequency of vocal Polyp Patients with normal persons, great change was noted only in female cases. But the Jitter and Shimmer of vocal polyp patients were greater than normal significantly in both male and female cases. SNR was lower than normal in vocal polyp patients. In the conclusion, fundamental frequency, Jitter, Shimmer and SNR might be meaningful parameters distinguisuing pathologic vibration from normal.

  • PDF