• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.159-165
• /
• 2013

One of the leading causes of night time automobile accidents is the darkness of surroundings. Headlamps play a critical role in casting light and providing drivers with visibility. Headlamp design and new technology have been developed recently as research has been actively carried out to increase headlamp recognition. This study statistically analyzes irradiation distance using computer simulation by categorizing headlamps applied in domestic automobiles in the last decade by year, light source, form, vehicle type, and height of installation. After analyzing results of irradiation distance, it appears irradiation distance has been increased by approximately 10m in the last decade. This increase in irradiation distance is predicted to decrease night time accidents by allowing more time to recognize potential causes of accidents.

• 한국컴퓨터정보학회논문지
• /
• 제26권2호
• /
• pp.119-124
• /
• 2021

본 연구에서는 자외선 조사 방향에 따른 화장품 살균 효율성을 확인하고자 하였다. 실험에는 그람양성균인 S.aureus에 대하여 자외선 살균의 실효 조사 각을 측정하였고 자외선 조사 방향에 따른 거리별 살균 영역의 변화를 연구하였다. 그리고 자외선 수평 조사 시 살균 효율을 높일 수 있는 방법으로서 누출 자외선을 반사시키는 방법을 제시해보았다. 그 결과 자외선 조사 각은 제품 설명에 비해 더 작게 측정되었고 자외선 조사 방향에 따른 살균 영역의 경우 수직 조사 시 시료와의 거리가 멀어질수록, 수평 조사 시 시료와의 거리가 가까울수록 살균 영역이 증가하였다. 또한 자외선 수평 조사 시 누출 자외선을 반사시키는 것으로 살균 효율을 높일 수 있는 것을 확인 하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권5호
• /
• pp.39-45
• /
• 2013

Many researchers have studied the effectiveness of ultrasound in chemical and environmental engineering fields including material synthesis, pollutant removal, cleaning, extraction, and disinfection. Acoustic cavitation induced by ultrasound irradiation in aqueous phase can cause various sonophysical and sonochemical reactions without any chemicals. However most of the previous studies focused only on the relationships between ultrasonic conditions and the results of sonochemical reactions in lab-scale sonoreactors. As a results of this, only a few studies have been devoted to design and optimization of industrial scale sonoreactors. In this study, the effect of the distance between two opposite transducer modules on sonochemical reactions was investigated in single and dual irradiation systems (334 kHz) for four distances including 50, 100, 150, and 200 mm using KI dosimetry. It was found that the dual irradiation systems provided higher performance in terms of the zeroth reaction coefficient and the cavitation yield compared to the single irradiation systems. The sonochemiluminescence (SCL) images for the visualization of the cavitation field showed that cavitation active zone was larger and sonochemical reaction intensity was much higher in the dual irradiation system than in the single irradiation system.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.164-172
• /
• 2021

In this paper a catadioptric laser-irradiation-precision test system is designed, to achieve a high-precision laser-irradiation-accuracy test. In this system, we adopt the method of imaging the entire target surface at a certain distance to realize the measurement of laser-irradiation precision. The method possesses the advantages of convenient operation, high sensitivity, and good stability. To meet the test accuracy requirement of 100 mm/km (0.01%), the coma, field curvature, and distortion over the entire field of view should be eliminated from the optical system's design. Taking into account the whole length of the tube and the influence of stray light on the structure type, a catadioptric system with a hood added near the primary imaging surface is designed. After optimization using the ZEMAX software, the modulation transfer function (MTF) of the designed optical system is 0.6 at 30 lp/mm, the full-field-of-view distortion is better than 0.18%, and the energy concentration in the 10-㎛-radius surrounding circle reaches about 90%. The illumination-accuracy test results show that the measurement accuracy of the radiation hit rate is better than 50 mm when the test distance is 1 km, which is better than the requirement of 100 mm/km for the laser-irradiation-accuracy test.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3176-3180
• /
• 2022

A gamma irradiator is a well-developed installation for gamma radiation sterilization. A "shuffle-dwell" mode is preferable for high dose applications. A novel configuration of a shuffle-dwell gamma irradiator is proposed to increase energy utilization and throughput, which would result in higher profitability. While the minimum distance between any irradiation position and each source pencil, the minimum distance between the neighboring irradiation positions and the size of source pencils are kept the same as the current configuration, the irradiation positions and source pencils are rearranged based on the fact that radiation is emitted in an isotropic fashion. The computational results suggest that the proposed configuration requires an 8.7% smaller area and exposes the product to 11.8% more gamma radiation in a 10.7% shorter irradiation time. In other words, the proposed configuration needs a smaller area and shorter irradiation time to have a better performance compared to the current shuffle-dwell gamma irradiator. Note that the claim is based primarily on an analytical calculation. Experimental and manufacturing among other practical considerations will be taken into account in the future work to exhaustively evaluate the performance of the proposed configuration and to compare it with that of the traditional configuration.

• 한국광학회지
• /
• 제31권4호
• /
• pp.183-190
• /
• 2020

본 논문에서는 넓은 조사 면적에 단거리 조사시에도 균일한 조명도 분포를 가지도록 하는 비대칭 배광의 조명 광학계에 대한 연구를 진행하였다. 단거리에 설치되는 조명의 경우 조사 거리가 짧기 때문에 충분한 배광 분포 형성이 되지 못해 조명의 균일도를 만족하기 어렵다. 또한 시인성을 위해 조명기기가 기울어져 설치되기 때문에 비대칭 배광의 조명 설계가 요구된다. 이러한 문제점을 해결하기 위해 비대칭 배광을 가지는 조명 광학계 설계를 통해 근거리 조사 시에도 대상 표면에 균일한 조명도를 얻을 수 있었으며, 이를 근거리 조명 중 하나인 라이선스 램프에 적용하여 법규 기준을 만족하는 것을 확인하였다.

• 농업과학연구
• /
• 제50권3호
• /
• pp.417-425
• /
• 2023

Because an irradiation of 405 nm violet light could have a strong energy, it was used to be sterilized against various microbes in the indoor air condition or fresh food. Escherichia coli is a representative bio-pollutant in the indoor air-borne bacteria, and a hygienic microbe in the horticultural food. This study evaluated the inactivation influences on E. coli DS5α after exposure to 405 nm violet-light (VL) by investigating irradiating time, and the vertical and horizonal distance from light source. The illumination of 405 nm VL was inversely proportional to the distance from the VL source. E. coli DS5α on nutrient agar (NA) was inactivated approximately 50% more than the control when irradiated at 65 cm from 405 nm VL for 3 hours. When compared to the control, E. coli DS5α was inactivated approximately 50% within 70 cm from 405 nm VL for 3 hours. As it was irradiated for 3 hours 70 cm away from 405 nm VL, the horizonal distance from the point was negatively correlated to the inactivation of E. coli DS5α. These results indicated that the inactivation of E. coli DS5α grown on NA medium needs to be irradiated with 405 nm within 70 cm from the light source for 3 hours.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.66-71
• /
• 2000

Laser induced surface hardening of Tool steel(STC5) can be achieved either with or without surface melting. In trans-formation hardening as the surface is heated to a temperature below its melting point and is rapidly cooled solidified microstructures are usually much finer and stronger than those of the base matals. For this reason surface modification of tool steel by YAG laser irradiation has been studied as a function of processing parameters such as power density pulse width defocusing distance and molten depth. The high energy density changes and refines the microstructure of the near surface layer. In the case of beam passes martensite formed in the melt zone exhibited very high vickers hardness values. Molten depth and width depend on defocusing distance and energy of black color painting is more absorptive than other color painting.

• 치과방사선
• /
• 제21권2호
• /
• pp.165-179
• /
• 1991

This study was performed to understand the irradiation effects on the mandibular condyle and mandibular growth in developing white rats. Forty eight white male rats of the Sprague-Dawley strain aged 4 weeks, were devided into two groups; control group and experimental group. A single target dose of l0Gy of radiation was given to the mandibular condylar area and the observations of the photo analysis, radiologic, histopathologic and immunohistochemical study revealed as follows; 1. Animals killed one week after irradiation showed lesser increase in body weights, no difference in photo analysis and decreased thickness of cartilagenous layers of the condyle than the control group. 2. Two weeks after irradiation the weight increases were almost same in both irradiated and control groups and in photo analysis, the distance from Mental Foramen to Incisal tip (Mf-It) was longer than the controls. Repair processes were taken place in irradiated group, but the cartilagenous layers were thinner than the controls. 3. By the third week after exposure further repair was seen in the trabeculae and the distance from Condylion to Mandibular plane (Cd-Cd') was longer than the controls and the weight increases were almost same as the controls. 4. At 4 weeks after irradiation the cells of proliferating zone repaired to almost normal findings, but the cartilagenous cell layers were still thinner than the control animals. In photo analysis, the distances from Menton to Anterior Notch (Me-An), from First Molar to Mandibular plane (Fm-Fm') were shorter and the weight increases were lesser than the controls. 5. In the S-100 antibody, the positive cells were increased in number, but decreased reactivities were seen at the proliferating zone of the irradiated groups. In the Monoclonal Anti-Proteoglycan antibody and Type Ⅰ collagen antibody, the irradiated groups showed little decreased number of positive cells and in the Type Ⅱ collagen antibody, the differences between irradiated and control groups were undetectable in immunohistochemical study.

• Journal of Yeungnam Medical Science
• /
• 제6권2호
• /
• pp.113-119
• /
• 1989

본 교실에서 Co-60치료기를 이용한 전신조사에 대한 선량의 측정 및 분석 결과는 다음과 같았다. 1. 폐부위는 기준되는 복부(24cm)에 비해 두께는 두껍지만(25.6cm) 폐의 낮은 밀도 때문에 6% 정도 더 많은 선량이 측정되어 폐손상이나 폐동맥 합병증의 예방을 위하여 적절한 보상판이 필요함을 시사하였다. 2. inverse square law에 의한 이론치 보다 실제의 측정치는 3% 정도 적게 측정되었다. 3. 머리부위(두께 15.8cm)와 목부위(11.0cm)는 얇은 두께 때문에 10%, 18% 정도 더 많은 선량이 측정되었고, 골반부위(두께 36.0cm)는 12% 정도 더 적은 선량이 측정되어 전신조사시 모든 부위에 등선량을 조사하기 위해서는 적당한 보상판이 필수적임을 시사하였다.