• Journal of the Korean Society of Clothing and Textiles
• /
• v.4 no.1_2
• /
• pp.43-48
• /
• 1980

The effect of free fatty acid in fatty soil on the detergency of particulate soil was investigated. Cotton lawn fabric was soiled with the mixture of polmitic acid, hydrogenated fat, paraffin oil and iron oxide black altering the contents of palmitic acid and was laundered with different sur-fastants under various temperature and alkalinity. The rate of soil removal was estimated by means of the spectoometic analysis of iron on the fabric before and after washing. The results of dergency were compared those obtained by reflactance and K/S value from Kubelka-Munk equation which were derived from reflactance measurements.

• Journal of Conservation Science
• /
• v.35 no.1
• /
• pp.91-98
• /
• 2019

The fragments of a wall painting excavated from among the historical remains of Jeseoksa Temple in Iksan. The extent of the damage to the fragments was examined and an analysis of the components of the pigment was conducted. The results of the component analysis of the pigment confirmed that the white pigment consisted of alkali feldspar and mullite. Although the results of the visual inspection revealed differences in color in the red and black pigments, the main component of the two colors was confirmed to be iron oxide. Red and black pigments are found at the same position. Although differences of color is obvious, those are identified as hematite and magnetite of oxidized steel's affiliation. It is judged that Differences of ingredients happened by external environment's factors.

• Journal of Conservation Science
• /
• v.35 no.2
• /
• pp.117-129
• /
• 2019

In this study, black-glazed porcelain excavated from the Shinan shipwreck is analyzed to distinguish its characteristics. Glazes of Hong-Tang kiln are thin and exhibit little vitrification, whereas the Ci-Zhou-type and Cha-Yang kilns are similar in terms of their cross section. However, Raman mapping images reveal difference in the distribution area of magnetite. In this study, firing experiments are conducted to determine how iron oxides change properties in black glazes. The results show that when hematite is fired to a temperature greater than $1250^{\circ}C$, it becomes magnetite. Therefore, it is estimated that a firing temperature of approximately $1200^{\circ}C$ is suitable for the Hong-Tang kiln. In addition, glazes of the Ci-Zhou-type and Cha-Yang kilns are fired at approximately $1300^{\circ}C$. However, when the characteristics of firing in ancient kilns are considered, porcelain can be fired for a sufficiently long period to extend to glaze surfaces.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.549-560
• /
• 2016

The purpose of this study is to identify the material characteristics of blackwares excavated from the Bonggok kiln site in Jinan-gun, Jeollabuk-do Province, South Korea, by scientific analyses and a reproduction experiment. Scientific analyses were conducted to determine the physical properties, chemical composition and for microscopic observation of blackwares. A reproduction experiment was also conducted by producing ceramic samples with black glaze, red ocher and limestone, and then cross sections of the samples were observed. The analysis results showed that all the excavated blackwares have similar properties such as chromaticity, specific gravity, absorption factor and porosity, but there is a difference depending on the crystallization of the ceramics. Thermal analysis showed that the exothermic peak was observed at about $1200^{\circ}C$, and crystal structure analysis indicated the presence of mullite. Hence, it can be concluded that the firing temperature of the excavated blackwares was around $1100-1200^{\circ}C$. Moreover, the glaze present on these blackwares has about 22% higher $Fe_2O_3$ content than those excavated from other places; however, the former has lower CaO content. For the reproduction experiment, samples were made using limestone as a flux and red ocher as a glaze. The results show that the cross section of the glaze layer of the reproduced sample have iron crystals with dendritic structures, similar to those present in the excavated black-wares. It is assumed that such iron crystals were formed during the process of melting and solidification of the iron oxide present in the blackwares.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.2
• /
• pp.152-162
• /
• 2013

The physico-chemical characteristics and nanostructure of the aerosol samples from a coal-fired power plant, a charcoal kiln and diesel vehicles were investigated with focusing on black carbon (BC). Aerosols from the coal-fired power plant were mostly comprised of mineral ash spheres which are heterogeneously mixed. The main components of the aerosols from coal-fired power plant were calcium compounds, iron oxide, alumino-silicate without BC. The typical combustion-generated BC which shows the shape of bunch of grapes with 20~50 nm particles which were detected in aerosol particles from diesel vehicles. The nanostructure of each BC particle shows the shape of concentric circles which is comprised of closely-packed graphene layers. Aerosols from charcoal kiln were likely condensed organic carbon generated from the low-temperature combustion process.

• Analytical Science and Technology
• /
• v.36 no.2
• /
• pp.80-88
• /
• 2023

Fingerprints play a crucial role in the identification of potential suspects in criminal cases. However, determining the actual time, i.e., the time at which the fingermark was deposited, is challenging. Herein, we investigated the persistence and aging of fingerprints over time by observing the time evolution of latent fingerprints on a polystyrene box stored in a dark room. Fingerprint samples that were stored for up to two years could be detected with maximum accuracy using a black iron-oxide-based emulsion (black emulsion). To estimate the time of fingerprint deposition, fingerprint aging was studied by analyzing the lipid components of the fingerprints after their development. Cholesterol and squalene were selected as indicators of fingerprint aging, and their ratio was estimated to assess aging. In the case of fingerprint samples stored in a dark room for up to one month after deposition, the cholesterol/squalene ratio was approximately 0.01; it increased gradually to ≥ 0.1 over six months. A substantial reduction in the levels of cholesterol and squalene from the initial levels was also noted. Cholesterol and squalene were not detected after one year of storage. Thus, the extent of aging could be determined by analyzing the aging indicators for up to six months. Two cases that could cause error in the estimation of the fingerprint deposition time, namely, heating of the fingerprint sample before development and storage of the developed fingerprints in a dark room, were also investigated.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.77-89
• /
• 2021

In this study, materials and color formation techniques were assessed for black potteries excavated from the Janghyeon-dong, Jungsan-dong and Gyodong-ri sites during the Proto-Three Kingdoms period in Ulsan, Korea. Although the black potteries were black superficially, the inner cores were either black or reddish yellow. Microscopy analysis identified that body clay was used for reddish iron oxide rich soils with quartz, alkali feldspar and mica, along with grains of myrmechite texture. Additionally, as marginal differences exist in the contents of SiO₂, Fe₂O₃ and CaO, the composition of the host rock and clay distributed around the sites was affected. Thus, we can deduce that pottery was made by soiling at a short distance. Raman spectroscopy results revealed that the black layer of the black pottery was used as amorphous combustion carbon. In addition, as a transparent layer of brown lacquer was observed on the substrate that was in contact with the surface layer, the black layer of the pottery induced black color development by a combination of combustion carbon and lacquer. Based on the mineral composition and microtexture of the body clay, the firing temperature of the potteries seemed to range from 750 to 850℃, whereas the lacquer layer was pyrolyzed at 468℃ by thermal analysis. Therefore, a combined layer of combustion carbon and lacquer, which formed the black color, was painted after the body clay was fired.

• Economic and Environmental Geology
• /
• v.46 no.5
• /
• pp.445-453
• /
• 2013

The Uiseong Tapriri Five-Storied Stone Pagoda (National Treasure No. 77) is typical stone cultural heritage in Unified Silla Dynasty, Korea. The pagoda has been occurred black, brown discoloration and microcrack, exfoliation, granularity decomposition with white discoloration because of continuous weathering. As the results of analysis for the contaminants, chemical weatherings are generated that black contaminant by manganese oxide, brown contaminant by iron oxide, white contaminants by gypsum and taranakite. And physical weatherings, such as microcrack, exfoliation, are occurred by salt(gypsum) crystallization. Therefore, these need to remove the contaminants according to the conservation treatment manual, and regular monitoring using P-XRF to preserve long-term the Five-Storied Stone Pagoda at Tapri-ri, Uiseong.

• Korea Science and Art Forum
• /
• v.30
• /
• pp.251-261
• /
• 2017

Metal is a material that has exerted a lot of influence on the development of human cultures, and has closely connected with our life from the past to the present. Types of metal we have used from the prehistoric times are varied, and iron relics take the largest percentage of metal relics excavated in our country. The biggest threat to the existence of iron relics ranging from excavated relics to the ones that are transmitted is the process of corrosion, and physical removal has been used the most for removing corroded oxides. For details for removal of corrosion oxides, this thesis aimed to research on the chemical corrosion oxides remover that protects parent material of iron relics but treats corrosion oxides only. For safe and effective removal of corrosion oxides of iron relics, this study was conducted aiming at finding the possibility of and optimized composition for removal of iron relics corrosion oxides by manufacturing new acid, alkaline and neutral oxides removers and changing their composition variously, exploring the possibility by applying the agents to modern relics. The results of this study are as follows: First, the acid solution removed only some part of corrosive substance oxidized on the surface of metal specimen. Second, the application of each of alkaline and neutral solution resulted in remaining black-colored corrosive substance, but it was removed when the quantity of the solution and the duration of application are increased. Third, All the three solutions did not cause any damage to parent material in the course of application, and showed the result that they are capable of removing unstable oxide layer while protecting parent material and stable corrosive layer as the solutions would be able to deal with situation by a relic only through the control of concentration of solution and duration of application.

• Journal of Korea Foresty Energy
• /
• v.22 no.2
• /
• pp.36-43
• /
• 2003

This study was carried out to evaluate the fungicidal, anti-sapstain and termiticidal efficacy of commercial Dan-Chung which are currently being used for painting to decorate and to provide durability with structures of temples. Two binders (Polysol and Gelatine), and eleven pigments (Iron Oxide Red, Lead Red, Toluidine Red, Chrome Yellow, Titanium Dioxide, Ultramarine Blue, Chrome Oxide Green, Permanent Black, Cyanine Green and Ho-bun(Chalk)) were applied for the evaluation. The fungicidal and anti-sapstain activity of each pigment were depended on the types of binders. When the Polysol was used as a binder, the fungicidal efficacy of Toluidine Red treated specimen was close to the standard value (above 80) with grater than 70 against to two wood decay fungi (T. palustris and T. versicolor). The anti-sapstain efficacy of Lead Red treated specimens was excellent against to three sapstain fungi (P. funiculosum, T. viride and R. nigricans), and that of Ultramarine Blue treated specimens was also excellent to T. viride. The other pigments had little efficacy to these micro-organisms. Although there were some different trends of the effectiveness depending on the types of binders, the anti-termite effectiveness of Chrome Oxide Green and Chrome Yellow was outstanding to termite tests.