• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.2
• /
• pp.56-62
• /
• 1999

This paper is concerned with the design and the construction of a moving magnet type linear DC motor(MM type LDM) for instrumentation. A mathematical model for the design of a LDM is developed and a permeance method is used to calculate the effective flux density in the air gap. The flux distribution in the air gap is analyzed and the width of iron core should be determined in order not to saturate the iron core by caluclating maxmum flux density. The design data culculated by a permeance method are compared with the analyzed results using FEM(MAXWELL 2D). The errors between two results are corrected. The tested LDM is constructed using the corrected design data. The results of experiment for thrust characteristics are compared with simulation.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.851-852
• /
• 2006

The introduction of ceramic particulate into metallic powder will unavoidably lower the compressibility and formability of the mixed powder. In this study, warm compaction, which is a simple and low cost technique to produce high density PM parts, was introduced in preparing composite. The aim of this paper is to prepare the warm compacted NbC particulate reinforced Fe-based composite, then study its tribological behavior and application in the valve-guide cup. A 15 wt.% NbC reinforced iron-based composite was prepared. It possesses a relative density of 98%, a tensile strength of 515 MPa, a hardness of HRC 58 and a remarkable tribological behavior.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.826-827
• /
• 2006

Copper infiltration is demonstrated as a viable solution to achieve higher mechanical properties by filling the interconnected porosities of a ferrous structure with copper infiltrant. This paper will present the results of a design of experiments study based on the selected processing variables in the copper infiltration process. The variables are the following: Infiltrating temperatures, infiltrating time at pre-heat zone and hot zone, the green density of iron part, the migration of copper into the iron part at different processing conditions. The results show the flexibility of the infiltration process to attain certain mechanical properties by changing the processing conditions.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.750-751
• /
• 2006

We investigated the mechanism how the high green density can be provided during die lubricated warm compaction (WD). We observed and analyzed the densification processes of iron powders including different contents of an inner lubricant, and measured the lateral pressure at the die wall during WD in comparison with conventional compaction and warm compaction. As a result, the high density in WD was due to not only the particles-deformation enhanced by warming powders but also the particles-rearrangement promoted by reducing an amount of the inner lubricant rather than the die lubrication.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.272-273
• /
• 2006

A new process of pulsed electric current sintering was developed. It combines compaction with activated sintering effectively and can manufacture bulky nano-crystalline materials very quickly. A nano-structured steel is obtained with high relative density and hardness by this process. The average grain size of iron matrix is 58nm and the carbide particulate size is less than 100 nm. The densification temperature of ball-milled powders is approximately $200^{\circ}C$ lower than that of blended powders. When the sintering temperature increases, the density of as-sintered specimen increases but the hardness of as-sintered specimen first increases and then decreases.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.3
• /
• pp.71-77
• /
• 1996

This paper is described on the eddy current for a peripheral magnetic objects of under ground power cable. The materials of cable rack is used FRP and SUS in the place of iron. Each specimen were measureed for eddy current loss and Hysteresis loss by Epstein's method. The results is compared each other. Hysteresis loss is inversely proportional to $\textrm{f}^{0.6}$ of frequence as supply voltage is constant. Also, iron loss is increased to 0.86 times for varinace of frequency from 60[Hz] to 50[Hz] as a maxium flux density is constant. In the case of Fe, Hysteresis loss is above 70[% ] of total iron loss. In the other hand, SUS is decreased to go[%] of Fe. by the simulation results using Loss Program Package. The iron loss of materials SUS, FRP is near zeor by Epstein's method.

• Corrosion Science and Technology
• /
• v.16 no.4
• /
• pp.187-193
• /
• 2017

Polymer amines are found to show distinct corrosion inhibition effects in acidic media. The functional groups of organic compounds have a wide role in the physical and chemical properties, for the inhibition efficiency with respect to steric factors, aromaticity, and electron density. The influence of $H^+$ ions and $Cl^-$ ions on the corrosion inhibitive effect of poly(p-aminophenol) for iron in hydrochloric acid was studied using electrochemical methods such as impedance, linear polarization, and Tafel polarization techniques. The experiments were conducted with and without the inhibitor, poly(p-aminophenol). The concentration range of $H^+$ ions and $Cl^-$ ions are from 1 M to 0.05 M and 1 M to 0.1 M, respectively. With the inhibitor poly(p-aminophenol), this study shows that inhibition efficiency decreases with the reduction of $H^+$ ion and $Cl^-$ ion concentrations in aqueous solution. Further, it reveals that the adsorption of an inhibitor on the surface of iron is dependent on the concentrations of $H^+$ and $Cl^-$ ions in the solution and the adsorption of inhibitor on the iron surface through the cationic form of amine.

• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.316-321
• /
• 2013

Electrocoagulation (EC) technique is applied for the treatment of wastewater containing heavy metals ions such as nickle (Ni), lead (Pb) and cadmium (Cd) by using sacrificial anodes corrode to release active coagulant flocs usually aluminium or iron cations into the solution. During electrolytic reactions hydrogen gas evolve at the cathode. All the experiments were carried out in Batch mode. The tank was filled with synthetic wastewater containing heavy metals and efficiency of electro-coagulation in combination with aluminum and iron electrodes were investigated for removal of such metals. Several parameters, such as contact time, pH, electro-coagulant concentration, and current density were optimized to achieve maximum removal efficiency (%). The concentrations of heavy metals were determined by using Atomic Absorption Spectroscopy (AAS). It is found that the electro-coagulation process has potential to be utilized for the cost-effective removal of heavy metals from wastewater specially using iron electrodes in terms of high removal efficiencies and operating cost.

• Biomedical Science Letters
• /
• v.16 no.4
• /
• pp.293-298
• /
• 2010

Several risk factors for osteoporosis are known relatively well. Some nutrients are directly or indirectly needed for metabolic processes related to bone. Recently, an increased prevalence of osteoporosis has been reported in patients with hemochromatosis, an iron overload disease. Thus, the aim of this study was to find out if there was any relationship between serum ferritin and T-score of bone mineral density in healthy women. We recruited 1,101 subjects females aged between 39 and 85 years. We measured serum ferritin, glucose tolerance indices, lipid profiles, inflammatory indices, hormones, calcium, alkaline phosphatase. Also, anthropometric, blood pressure, and bone mineral density measurements were performed. T-score was negatively correlated with age (r=-0.425; P<0.01), systolic (r=-0.109; P<0.01) and diastolic (r=-0.093; P<0.01) pressure, follicular stimulation hormone (r=-0.190; P<0.01), alkaline phosphatase (r=-0.235; P<0.01), and serum ferritin (r=-0.090; P<0.05) and positively with body mass index (r=0.050; P=0.01), HDL-cholesterol (r=0.314; P<0.01), and estradiol (r=0.200; P<0.01). After adjustment for age, alkaline phosphatase, body mass index, HDL-cholesterol, estradiol, and follicular stimulation hormone, serum ferritin was independently inversely correlated with T-score (${\beta}$=-0.001; P<0.05). It is possible that an increase of serum ferritin in females be risk to osteoporosis.

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.25-39
• /
• 2000

This study investigated the nutrient contents, nutrient density. and food group intake patterns of elementary school lunch programs in Kesngju. Four hundred students from four elementary schools participated in this study. Menus served in 60 schools on a weekly basis during each season were analyzed. Parents regarded hygiene as the most important factor in their children's diet. but they showed little concern for the necessity of nutrition education in the school curriculum. Parents considered that the most significant benefit of their children eating school lunches was to reduce unbalanced diets. On the other hand. children considered to be able to be on intimate terms with their friends as the greatest benefit of the school lunch program. The contents and nutrient densities of the meals provided were higher than those calculated from the Korean RDA. However, the content and nutrient density of iron were lower than those calculated from the RDA for 10 to 12 year old girls. The content of sodium was very high. Therefore the nutritionists should consider the Iron and cut down the amount of sodium. The 91.7% of 1,200 meals served contained more than four food groups and the school lunch program provided a sufficient variety of foods. In conclusion. the quality of nutrition in meals served by school lunch programs was considered satisfactory overall.