• 한국주조공학회지
• /
• 제3권3호
• /
• pp.159-166
• /
• 1983

In order to develope domestic carburizers, the experiment was carried out by applying crystallization heat treatment to domestic anthracites and also to foreign products to compare with domestic anthracites.The present work was mainly concerned with the effect of their degree of crystallization of carbon-bearing materials on carbon pick-up in molten iron.Those effects were evaluated by the measurement of density, chemical composition, specific electric resistivity, and X-ray intensity of carbon-bearing materials. Experimental results thus obtained were summurized as follows. 1. The degree of crystallization of domestic anthracites and foreign products was increased with increasing heat treatment temperature. 2. The more degree of crystallization, the shorter the dissolving time of domestic anthracites in molten iron was obtained, while that of foreign products was remained constant. 3. As the degree of crystallization of domestic anthracites and foreign products was increased, the carbon content as well as carbon recovery in molten iron was increased.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.141-148
• /
• 2004

Coal combustion in an iron ore sintering bed is a key parameter that determines quality of the sintered ores and productivity of the process. In this study, effects of the different types of coal coke and anthracite - on the combustion in the iron ore sintering bed are investigated by modeling and experiment. Fuel characteristics of coke and anthracite are observed through a few basic analysis and thermo-gravimetric analysis. It was found that coke has a higher reactivity than anthracite due to the difference of surface area and density. Those characteristics are reflected to the 1-D unsteady simulation of the iron ore sintering bed. Calculation results show that different reactivity of the fuel can affect the bed combustion, which implies the further investigation should be performed for obtaining optimal combustion conditions in the sintering bed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.49-51
• /
• 2004

The iron loss in electric machines takes large part of machine losses and the reduction of iron loss brings the increase of the efficiency. In the rotating machines, however it is very difficult to calculate the iron loss and to get the exact experiment result because the measuring precesses are very complex and laborious. As is well known, the relation between the flux density B and the magnetic field intensity H relation is not linear. For the iron loss, B and H must be measured and usually B becomes the reference wave(sine wave) and the following H is measured using H-coil. To make the B as sine wave, B is controlled by some devices. The error is controlled to become zero by the proposed algorithm which uses the bisection algorithm. The experiments are compared with the simulation results, and they show acceptable agreements.

• 한국연소학회지
• /
• 제9권2호
• /
• pp.30-37
• /
• 2004

Coal combustion in an iron ore sintering bed is a key parameter that determines quality of the sintered ores and productivity of the process. In this study, effects of the different types of coal - coke and anthracite - on the combustion in the iron ore sintering bed are investigated by modeling and experiment. Fuel characteristics of coke and anthracite are observed through a set of basic analysis and thermo-gravimetric analysis. Coke has a higher reactivity than anthracite due to the difference of surface area and density, and these characteristics are reflected in the 1-D unsteady simulation of the iron ore sintering bed. Calculation results show that different reactivity of the fuel can affect the bed combustion.

• Journal of Nutrition and Health
• /
• 제44권5호
• /
• pp.394-405
• /
• 2011

Osteoporosis is a rising problem, as the older age population is increasing due to prolongation of life. Genetic and environmental factors play key roles in bone metabolism, and diet is also an important factor. We investigated the relationship among factors affecting bone mineral density (BMD), including daily food intake and nutrient intake in men aged >50 years. Seventy-eight men, who visited the health promotion center at one of the university medical centers, were divided into normal and osteopenia groups according to their BMD. The body weight of the normal group was significantly higher than that of the osteopenia group. The osteopenia group showed significantly higher carbohydrate intake and lower calcium and vegetable calcium intake compared to those in the normal group. Lumbar spine BMD was negatively correlated with energy, fat, vitamin B1, and sodium intake in the normal group. Additionally, femoral neck BMD was negatively correlated with total animal protein, energy, protein, fat, phosphorous, iron, animal iron, potassium, vitamin B1, B2, B6, and niacin intake. Lumbar spine BMD was positively correlated with fruit, calcium, vegetable calcium, animal calcium, and vitamin C intake in the osteopenia group. Femoral neck BMD was negatively correlated with meat, dairy product, total animal protein, plant protein, animal protein, vitamin A, and cholesterol intake. A stepwise multiple regression analysis revealed that several dietary factors affected BMD, including energy, fat, vitamin B1, B2, B6, niacin, sodium, protein, iron, animal iron, phosphorous, potassium, and animal protein in the normal group and zinc, calcium, vegetable calcium, animal calcium, vitamin C, fruit, protein, animal protein, meat, dairy product, carbohydrates, cholesterol, vegetables, mushrooms, and seasonings in the osteopenia group. These results indicate that adequate nutrient intake plays an important role maintaining optimum bone health in middle aged men.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권3호
• /
• pp.5-9
• /
• 2021

Comprehensive utilization of sulfur-containing iron tailings (SIT) not only solves environmental problems but also creates certain economic value. The iron element from SIT was enriched by the superconducting high gradient magnetic separation (S-HGMS) technology in this study. In the experiments, the total iron content (TFe) was increased from 26.3% to 60.5% with the total sulfur content (TS) of 5.9% under the optimal parameters, i.e., a magnetic flux density of 0.4 T, a slurry flow rate of 1500 mL/min. The high-quality sulfur-containing material with TFe of more than 60% was obtained, which can be used for preparing high-sulfur free cutting steel. The S-HGMS technology can realize the resource utilization of iron tailings with high added value.

• 한국초전도ㆍ저온공학회논문지
• /
• 제26권2호
• /
• pp.9-18
• /
• 2024

The current study deals with the possible interplay between superconductivity and spin density wave in two band model high temperature iron based superconductor (FeBSC) Ba_1-xNa_xFe₂As₂. The electron and hole bands in the presence of the inter-band interaction between the two bands is becoming a vital issue to deal with the high temperature physics of the iron-based superconductors. In this research work, a model Hamiltonian appropriate for the system under consideration has been developed and the temperature dependent Green's function technique has been employed to get the solution for the equations of motion constructed for the two band model high temperature FeBSC Ba_1-xNa_xFe₂As₂. By making use of the decoupling procedure, the equations of motion for the dependence of superconducting transition temperature (T_C) on spin density wave(SDW) order parameter (Δ_SDW) in the electron intra-band (Δ_sc(e)) , hole intra-band (Δ_sc(h)) and inter-band (Δ_sc(eh)) for Ba_1-xNa_xFe₂As₂ have been obtained. We have also obtained the expression for the dependence of spin density wave transition temperature(T_SDW) on Δ_SDW for Ba_1-xNa_xFe₂As₂. Using some plausible approximations and appropriate experimental values for the parameters in the obtained equations of motion, phase diagrams of T_C versus Δ_sc(e), Δ_sc(h) and Δ_sc(eh) are plotted. Furthermore, a phase diagram of T_SDW versus Δ_SDW is plotted for the material under consideration. Finally, using the above mentioned phase diagrams, the interplay between superconductivity and spin density wave in the two band model high temperature FeBSC Ba_1-xNa_xFe₂As₂ has been demonstrated to be a very distinct possibility. The agreement of the current finding with the experimental observations is quite commendable.

• 대한영양사협회학술지
• /
• 제12권1호
• /
• pp.10-17
• /
• 2006

The purpose of this study was to examine the correlation between nutrient intakes and bone mineral density in female university students. A total 27 female university students were measured the anthropometric characteristics, dietary intake and the bone mineral density of carpus using DEXA. The average age, height, weight, % body fat, WHR, and BMI of the subjects were 22.7 years, 161.5 cm, 57.0 kg, 29.9%, 0.8, 21.8 kg/$m^2$, respectively. Bone mineral density of ultradis and distal carpus as T-value were -1.5 and -0.4, respectively. The daily energy intake of the subjects was 1589.0kcal. And the intakes of energy, calcium, iron, zinc, vitamin $B_2$, and folic acid did not meet the Korean RDAs. The daily total food intake of the subjects was 1011.0g and food intake from cereals and vegetables was high. The major food groups of mineral intake were vegetables/cereals/milks/fishes for calcium, cereals/meat/vegetables/fishes for phosphorus, cereals/vegetables/meats for iron, seasonings/vegetables/cereals for sodium, vegetables/cereals/seasonings for potassium, and cereals/meats for zinc. The body weight and body mass index were significantly positive correlated to the bone mineral density of average carpus, respectively. The intakes of animal calcium and vitamin $B_2$ were significantly negative correlated to the bone mineral density of average carpus, respectively. In conclusion, bone mineral density in carpus and nutrient intakes of some female university students were low. Therefore, health management and the study on relation between bone mineral density in various site and long-term intakes of nutrients in many subjects are required.

• 유기물자원화
• /
• 제23권1호
• /
• pp.45-51
• /
• 2015

본 연구에서는 비귀금속 촉매인 iron(II) phthalocyanine (FePc)와 cobalt tetramethoxyphenylporphyrin(CoTMPP)를 환원전극촉매로 이용하여 미생물연료전지의 연속운전을 진행하였다. 연속운전은 유기물 부하 (0.5~3 g COD/L/d)와 HRT (0.25~1 day)의 조건을 달리 운전하여 미생물연료전지의 성능을 평가하였다. 미생물연료전지의 전력밀도는 환원전극의 성능에 크게 영향을 받았으며, 최대전력밀도는 $3.3W/m^3$로 백금을 사용한 미생물연료전지에서 나타났다. 하지만, HRT의 조건을 달리 한 실험에서 FePc를 사용한 미생물연료전지가 백금을 사용한 미생물연료전지와 유사한 성능을 나타냈으며, 연속운전에서 백금 촉매를 대체할 수 있는 적합한 물질로 나타났다. 반면에 CoTMPP를 사용한 미생물연료전지는 연속운전에서 내부 저항의 급격한 증가로 전력밀도가 급격히 감소하였다.

• 한국자원식물학회지
• /
• 제20권4호
• /
• pp.321-324
• /
• 2007

벼 재배기술의 개선방향을 모색코자 객토 철분 및 규산질 비료를 첨가하여 다수확 재배 실험하였던바 보통재배구에 비하여 간장, 수장은 길고 수수도 많았으며 현미천입증도 무거워서 현미수량은 544.7kg/10a로 보통재배구의 431.8kg/10a보다 26% 증수였다.