• 제목/요약/키워드: iron(III) chloride

검색결과 44건 처리시간 0.026초

폐네오디뮴 자석 침출용액으로부터 Slurry 환원법을 이용한 철 Nano 분말 제조 (Preparation of Iron Nano-particle by Slurry Reduction Method from Leaching Solution of Spent Nd magnet)

  • 안종관;강윤지;유혜빈;윤호성
    • 자원리싸이클링
    • /
    • 제23권6호
    • /
    • pp.22-29
    • /
    • 2014
  • 네오디뮴 폐자석 침출액으로부터 희유금속인 네오디뮴을 회수하는 연구와 함께 네오디뮴과 같이 침출되는 철의 부가가치를 높이는 연구가 필요하다. 본 연구에서는 네오디뮴과 같이 침출되는 철의 유용자원화를 위한 기초연구로 철 나노분말을 제조하는 실험을 수행하였다. 본 연구는 $FeCl_3$ 용액을 철 분말 원료로, 분산제는 $Na_4P_2O_7$와 Polyvinylpyrrolidone를 이용하였고, 환원제로는 $NaBH_4$, 철 나노분말 핵생성 촉진제 seed로 염화팔라듐을 사용하였다. 제조한 철 나노분말을 XRD, SEM을 이용하여 분말의 형상 및 크기를 분석하였다. Fe와 $NaBH_4$의 몰 비를 1 : 5로 조절하여 철 분말을 제조하였으며, 이 때 철 분말은 구형이었으며, 입도는 약 50 ~ 100 nm 였다. 분산제 $Na_4P_2O_7$의 경우 100 mg/L에서 철 이온의 제타포텐셜이 음의 값을 가졌고, $FeCl_3$ 과 PVP와 Pd의 질량비 1 : 4 : 0.001에서 분산이 양호하고, 입도가 100 nm 인 철 나노분말을 합성하였다. 같은 반응 조건에서 폐 Nd 침출액의 Fe 이온을 pH를 조절하여 슬러리화한 후 실험을 진행한 결과, pH 9에서 구형의 철 분말을 합성할 수 있었으며, 20 L 이상의 Scale-up 공정에서는 분산제 없이 환원제로 175 nm 크기의 철 분말을 합성할 수 있었다.

전이금속염 함유 키랄 살렌 촉매에 의한 광학선택적 에폭사이드의 합성 (Enantioselective Epoxide Synthesis on the Chiral Salen Catalyst having a Transitional Metal Salt)

  • 곽소봉;키테라 라올;김건중
    • Korean Chemical Engineering Research
    • /
    • 제46권4호
    • /
    • pp.769-776
    • /
    • 2008
  • 키랄성 말단기의 에폭사이드는 키랄중간체나 여러 출발물질로서 다양하게 이용되기 때문에 그 선택적인 합성법은 매우 유용하다. 본 연구에서는 염화코발트(II), 염화철(III) 및 질산아연(II)을 각각 함유한 키랄 코발트 살렌 촉매를 새로이 합성하고 그 특성을 평가하였다. 질량분석과 EXAF분석을 통하여 형성된 촉매 착체의 구조를 평가하였다. 합성한 촉매는 방향족 에폭사이드인 스타이렌 옥사이드와 페닐글리시딜 에테르의 속도차에 의한 비대칭 가수분해적 고리열림반응과 글리시틸부틸레이트의 합성반응에 적용하여 그 활성과 선택성을 조사하였다. 합성이 용이한 전이금속염함유 살렌착체 촉매는 물을 친핵체로 하는 라세믹 에폭사이드의 고리 열림을 통하여 99%ee 이상을 나타낼 정도의 매우 높은 광학선택성을 보였으며, 적은 양의 첨가로도 높은 활성을 보였다. 본 연구에서 적용한 촉매씨스템은 키랄 에폭사이드 및 1,2-디올 중간체의 제조에 매우 효과적이었다.

Solid-State Ball-Mill Synthesis of Prussian Blue from Fe(II) and Cyanide Ions and the Influence of Reactants Ratio on the Products at Room Temperature

  • Youngjin Jeon
    • 대한화학회지
    • /
    • 제68권2호
    • /
    • pp.82-86
    • /
    • 2024
  • This paper presents the solid-state synthesis of insoluble Prussian blue (Fe4[Fe(CN)6]3·xH2O, PB) in a ball mill, utilizing the fundamental components of PB. Solid-state synthesis offers several advantages, such as being solvent-free, quantitative, and easily scalable for industrial production. Traditionally, the solid-state synthesis of PB has been limited to the reaction between iron(II/III) ions and hexacyanoferrate(II/III) complex ions, essentially an extension of the solution-based coprecipitation method to solid-state reaction. Taking a bottom-up approach, a reaction is designed where the reactants consist of the basic building blocks of PB: Fe2+ ions and CN- ions. The reaction, with a molar ratio of Fe2+ and CN- corresponding to 1:2.8, yields PB, while a ratio of 1:6.6 results in a mixture of potassium hexacyanoferrate(II) (K4Fe(CN)6), potassium chloride (KCl), and potassium cyanide (KCN). This synthetic approach holds promise for environmentally friendly methods to synthesize multimetallic PB with maximum entropy in nearly quantitative yield.

Kinetic Studies on the Reaction of Iron (Ⅲ) with D-penicillamine in Acidic Solution$^1$

  • Hyun-Jae Park;Yung-Hee Oh Kim;Jung-Ae Shim;Sung-Nak Choi
    • Bulletin of the Korean Chemical Society
    • /
    • 제14권4호
    • /
    • pp.444-449
    • /
    • 1993
  • Anaerobic oxidation of D-penicillamine by Fe(III) in acidic solution has been studied kinetically by the use of stopped-flow system. The reaction is biphasic with a rapid complexation of 1: 1 complex, $Fepen^+$ (pen= D-penicillamine dianion) which is then internally reduced to Fe(II) and disulfide. Rates of both the complexation and the redox process are pH dependent and also are affected by the presence of chloride ion. Different from the reaction of Cu(II) with D-penicillamine, partially oxidized mixed-valence complex is not formed even transiently in this reaction.

네오디뮴 폐자석 재활용을 위한 화학환원법을 이용한 철 나노 분말 제조 (Synthesis of Iron Nanopowder from FeCl3 Solution by Chemical Reduction Method for Recycling of Spent Neodymium Magnet)

  • 하용황;강윤지;최승훈;윤호성;안종관
    • 한국산학기술학회논문지
    • /
    • 제13권12호
    • /
    • pp.6187-6195
    • /
    • 2012
  • 네오디뮴 폐자석 침출액으로부터 희유금속인 네오디뮴을 회수하기 위해서는 네오디뮴과 같이 침출되는 철의 부가가치를 높이는 연구가 필요하다. 본 연구에서는 네오디뮴과 같이 침출되는 철의 유용자원화를 위한 기초연구로 철 나노분말 제조하는 실험을 수행하였다. 본 연구는 $FeCl_3$ 용액을 철 분말 원료로, 분산제는 $Na_4O_7P_2$와 Polyvinylpyrrolidone를 이용하였고, 환원제로는 $NaBH_4$, 철 나노분말 핵생성 촉진제 시드(seed)로 염화팔라듐을 사용하였다. 제조한 철 나노분말을 XRD, 전자현미경(SEM) 및 PSA 등을 이용하여 분말의 형상 및 크기 등을 분석하였다. 철과 $NaBH_4$의 농도비가 1 : 5이며, 반응시간이 30분 이상인 경우에서 철 분말이 제조되었으며, 이때 철 분말은 구형이었으며, 입도는 약 50 nm ~ 100 nm 크기였다. 분산제 $Na_4O_7P_2$의 경우 100 mg/L에서 철이온의 제타포텐셜이 음의 값을 가지므로 100 mg/L로 일정하게 하고, PVP와 Pd의 농도를 다양하게 하였을 경우, $FeCl_3$와 PVP와 Pd의 질량비 1 : 4 및 1 : 0.001에서, 분산이 양호하고, 입도 100 nm 크기인 철 나노분말을 합성하였다.

이온 교환수지에 의한 철 및 강의 분석에 관한 연구 (제2보). 음이온 성분의 분리 (The Study on the Separation of the Subsidiary Elements in Iron and Steel by Using Ion Exchangers (II). The Separation of Anions)

  • 이병조;박면용;박기채
    • 대한화학회지
    • /
    • 제17권6호
    • /
    • pp.428-433
    • /
    • 1973
  • 음이온교환수지관(Dowex 1${\times}8,\;20cm{\times}3.14cm^2$)을 통하여 0.1M Si(IV), As(V), P(V), S(VI), W(VI), Cr(VI)의 용액을 각기 1ml씩 취하여 섞은 용액 6ml를 다음과 같은 용리액으로 용리시켜 정량적으로 분리하였다. 이때에 용리액은 Si(IV), As(V), P(V)에 대하여 0.07M 염산과 0.03M 염화나트륨을 섞은 용액(pH 1.3)을, S(VI), W(VI), Cr(VI)에 대하여 0.6M 염화나트륨과 0.3M 수산화나트륨을 섞은 용액을 사용하였다. 이때에 함께 용출된 P(V)와 As(V)의 혼합액은 아황산나트륨용액으로 처리하여 As(V)를 As(III)으로 환원시킨다음 0.1N 아황산나트륨용액(pH 3.48)으로 용리하여 분리하였다. 많은 양의 철(97% 이상)과 Si(IV), As(V), S(VI), P(V), W(VI)이 혼합된 용액은 양이온교환수지관(Dowex 50w${\times}12,\;30cm{\times}3.14cm^2$)을 통하여 디메틸술포옥시드와 질산나트륨의 혼합용리액으로 용리하여 철을 먼저 분리하고 다시 음이온들은 음이온교환수지관을 통하여 분리하였다. 철강중에 들어있는 음이온 성분들도 같은 방법으로 분리할 수 있었다.

  • PDF

공액 사슬을 갖는 철 화합물의 전기화학적 특성 (Electrochemical Properties of Diiron Complexes wish Conjugated Chains)

  • 정민철
    • 한국전기전자재료학회논문지
    • /
    • 제15권6호
    • /
    • pp.511-517
    • /
    • 2002
  • The complex 1 $([Cp*Fe(CO)_2]_2-(\mu-CH=CH-CH=CH))$ which have butadiene as a bridge were synthesized from $Cp*(CO)_2FeK$ and cis-3,4-dichlorocyclobutene. The derivatives of complex 1 where one or two carbonyl groups are replaced by phosphine ligands have been prepared by photochemical substitution. The new derivatives $([Cp*Fe(L)_2]_2-(\mu-CH=CH-CH=CH))$ where L = $(Ph_2PCH_2CH_2PPh_2)$ and $([Cp*Fe(CO)(L)]_2-(\mu-CH=CH-CH=CH))$ where L : $PPh_3$ have been characterized from $^^1H-$, $^^13C-$,$^^31P-NMR$ and elemental analysis. Obtained complexes have been studied in electrochemical experiment and UV/VIS-near-IR. The mixed-valence radical cation forms of complex 2, 3 species were found to be delocalized as the Class III. Based on the separation of the waves ($\triangle E$ : 0.470 ~ 0.605 V), the efficiency of electronic communication between two metal centers of cation species leading to stabilization relative to neutral species. The phosphine-substitute complexes (2, 3) displays two reversible oxidation waves and oxidation state of metal centers-dependent color change, electrochromism, was observed from yellow to orange and deep blue in methylene chloride.

Controlling size and magnetic properties of Fe3O4 clusters in solvothermal process

  • Madrid, Sergio I. Uribe;Pal, Umapada;Jesus, Felix Sanchez-De
    • Advances in nano research
    • /
    • 제2권4호
    • /
    • pp.187-198
    • /
    • 2014
  • Magnetite nanoparticles (MNPs) of different sizes were synthesized by solvothermal process maintaining their stoichiometric composition and unique structural phase. Utilizing hydrated ferric (III) chloride as unique iron precursor, it was possible to synthesize sub-micrometric magnetite clusters of sizes in between 208 and 381 nm in controlled manner by controlling the concentration of sodium acetate in the reaction mixture. The sub-micrometer size nanoclusters consist of nanometric primary particles of 19 - 26.3 nm average size. The concentration of sodium acetate in reaction solution seen to control the final size of primary MNPs, and hence the size of sub-micrometric magnetite nanoclusters. All the samples revealed their superparamagnetic behavior with saturation magnetization ($M_s$) values in between 74.3 and 77.4 emu/g. $M_s$. The coercivity of the nanoclusters depends both on the size of the primary particles and impurity present in them. The mechanisms of formation and size control of the MNPs have been discussed.

제강더스트로부터 갈륨의 회수 (Recovery of Gallium from Steelmaking Dust)

  • 양종규;이성식;김종화;황영길
    • 자원리싸이클링
    • /
    • 제2권4호
    • /
    • pp.27-32
    • /
    • 1993
  • 제강더스트 중에 미량으로 함유되어 있는 갈륨을 분리 회수하는 프로세스를 연구하였다. 2.25mol/l-$H_2SO_4$ 침출에의하여 38mg/l의 갈륨을 함유하는 수용액을 얻었다. 이 침출액 중에서 1000배 량의 철과 아연이 함유되어 있다. 침출액 중의 갈륨은 철(III)이온을 철(II)이온으로 환원하고, pH 조정한 후, 아미노카르본산형 관능기를 가진 킬레이트 수지를 이용하여 흡착 농축하였다. 1.5mol/l-$H_2SO_4$에 의한 용리액을 칼럼에 재공급하고 재농축하여, 3.0mol/l-HCl을 이용하여 용리하였다. 용리액 중의 갈륨은 13g/l의 농도를 나타내었다. 갈륨의 정제는 용매추출법에 의하여 정제하였다. 추출제로는 TOMAC(tri-n-octhylmethylammonium chloride)을 사용하여 순수한 갈륨 정제액을 얻었다.

  • PDF

수열 합성법에 의해 페릭페로시아나이드가 코팅된 마이카 티나니아 진주광택안료의 합성 및 특성 (Synthesis and Characteristic of Ferric Ferrocyanide Coated Titania/Mica Pearlescent Pigments by Hydrothermal Synthesis Method)

  • 이관식;이동규
    • 한국응용과학기술학회지
    • /
    • 제28권3호
    • /
    • pp.335-344
    • /
    • 2011
  • The pearlesent pigment has received attention in a diversity of fields like cosmetics, inks, paints and so on. Ferric Ferrocyanide, one of the nano sized pearlescent pigment, is a kind of surface modification pigment that covers a metal oxidized substance or a coloring agent with uniform thickness. Characteristics of pearlescent pigment are various interference color, intense gloss effect and a three-dimensional effect. We synthesised the pearlesent pigment that ferric ferrocyanide can be deposited on the titania/mica surface by hydrothermal synthesis method. The process parameters are concentration of precursor, controlling pH and reaction temperature. The optimun conditions is that amount of iron(III) chloride hexahydrate is 3.1 wt% and amount of potassim ferrocynide trihydrate is 3.6 wt% in the started pH 4.5 at $70^{\circ}C$. The coating rate and coating efficiency of ferric ferrocyanide was about 1.47 % and 96.7 %, respectively. The synthesised pearlesent pigment was characterized by SEM, XRD, FT-IR and EDS.