• Korean Journal of Pharmacognosy
• /
• v.47 no.1
• /
• pp.92-101
• /
• 2016

In this study, an ultra-performance liquid chromatography-electrospray ionization-mass spectrometry (UPLC-ESI-MS/MS) method was established for simultaneous determination of the 25 marker components, including chlorogenic acid, gallic acid, oxypaeoniflorin, homogentisic acid, methyl gallate, caffeic acid, 3,4-dihydroxybenzaldehyde, paeoniflorin, albiflorin, liquiritin, nodakenin, ferulic acid, ginsenoside Rg1, liquiritigenin, coumarin, cinnamic acid, benzoylpaeoniflorin, ginsenoside Rb1, cinnamaldehyde, paeonol, glycyrrhizin, 6-gingerol, evodiamine, rutecarpine, and spicatoside A in traditional Korean formula, Onkyung-tang. All analytes were separated on a Waters Acquity UPLC BEH $C_{18}$ analytical column ($2.1{\times}100mm$, $1.7{\mu}m$) at $45^{\circ}C$ using a mobile phase of 0.1% (v/v) formic acid in water and acetonitrile with gradient elution. The MS analysis was carried out using a Waters ACQUITY TQD LC-MS/MS coupled with an electrospray ionization (ESI) source in the positive and negative modes. The flow rate and injection volume were 0.3 mL/min and $2.0{\mu}L$, respectively. The correlation coefficient of all analytes in the test ranges was greater than 0.98. The limits of detection and quantification values of the 25 marker compounds were in the ranges 0.03-19.43 and 0.09-58.29 ng/mL, respectively. As a result, methyl gallate, 3,4-dihydroxybenzaldehyde, evodiamine, and rutecarpine were not detected in this sample and the concentrations of the 21 compounds except for the above 4 compounds were $33.09-3,496.32{\mu}g/g$ in Onkyung-tang decoction. Among these compounds, paeonol was detected at the highest amount as a $3,496.32{\mu}g/g$.

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.207-215
• /
• 2000

Al films on cold-rolled steel sheet have been prepared by vacuum evaporation and arc-induced ion plating, respectively, and the evaporation rate and vapor distribution (thickness distribution over the substrate) have been investigated according to deposition conditions. The arc-induced ion plating (AIIP) method have been employed, which makes use of arc-like discharge current induced by ionization electrode located near the evaporation source. The AIIP takes advantage of high ionization rate compared with conventional ion plating, and can be carried out at low pressure of less than $10^{-4}$ torr. Very high evaporation rate of more than 2.0 mu\textrm{m}$/min could be achieved for Al evaporation using alumina liner by electron beam evaporation. The geometry factor n for the $cos^{n/\phi}$ vapor distribution, which affects the thickness distribution of films at the substrate turned out to be around 1 for vacuum evaporation, while it features around 2 or higher for ion plating. For the ion plated films, it has been found that the ionization condition and substrate bias are the main parameters to affect the thickness distribution of the films.

• Mass Spectrometry Letters
• /
• v.4 no.2
• /
• pp.30-33
• /
• 2013

Chalcones are naturally occurring, biologically active molecules generating interest from a wide range of research applications including synthetic methodology development, biological activity investigation and studying fragmentation patterns. In this article, a series of chalcones has been synthesized and their fragmentation behavior was studied using modern ambient ionization technique Direct Analysis in Real Time (DART). DART ion source connected with an ion trap mass spectrometer was used for the fragmentation of various substituted chalcones. The chalcones were introduced to the DART source using a glass capillary without sample preparation step. All the chalcones showed prominent molecular ion peaks $[M]^{{\cdot}+}$ corresponding to the structures. Multistage mass spectral data $MS^n$ ($MS^2$ and $MS^3$) were collected for all the chalcones studied. The chalcones with substitutions at 3, 4 or 5 positions gave product ion peaks with the loss of a phenyl radical ($Ph^{\cdot}$) by radical initiated ${\alpha}$-cleavage, while substitution at 2 position of chalcone in the A-ring gave a product ion peak with the loss of substituted styryl radical (PhCH = $CH^{\cdot}$). In case of the chalcones with the substituent at 4 positions in A and B rings gave both types of fragmentation patterns. In conclusion, chalcones can be easily characterized using modern DART interface in very short time and efficiently without any cumbersome sample pretreatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.402.2-402.2
• /
• 2014

과학과 기술이 발전할수록 나노크기를 넘어서 나노 크기미만의 관찰 분해능과 가공능력이 필수로 요구되어 측정장비와 가공장비의 연구 및 개발이 매우 중요하다. 현재는 주사전자현미경과 투과전자현미경의 발달로 나노크기 이하의 이미징 분해능에는 도달하였지만, 전자 입자의 가벼운 무게 때문에 가공측면에서는 한계를 가지고 있다. 또한 지난 수십 년간 정밀가공에 사용된 갈륨이온 LMIS(Liquid Metal Ion Source)기반의 집속이온빔 시스템은 수십 nm의 가공정밀도를 가지지만 10 nm 미만의 가공정밀도까지 구현하기에는 현재 기술적인 한계로 힘들다. 나노크기 이하의 이미징 분해능과 수 nm의 가공정밀도를 갖는 이온현미경이 최근에 상용화되어 판매되고 있는데, 이 이온 현미경에 사용되는 것이 가스장 이온원(GFIS:Gas Field Ionization Source)이다. 가스장 이온원은 작은 발산각, 작은 가상 이온원 크기 그리고 좁은 에너지 퍼짐의 특징을 가지며 이에 따라 구면수차 및 색수차에도 둔감한 특징을 가지고 있다. 또한 LMIS 는 갈륨이온이 시편속에 파고들어 시편의 물질 특성이 변화되는 문제가 있지만, GFIS에서는 주로 He, Ne 와 같은 불활성 기체를 주로 사용하므로 시편과 반응을 최소화 할 수 있는 장점도 있다. 위와 같은 특징을 갖는 이온빔을 GFIS 로 생성하고 이온현미경에 사용하기 위해서는 이온빔이 팁의 단원자 내지 수 개 정도의 원자에서 생성되도록 해야 한다. 본 연구에서는 GFIS 의 원리를 소개하고 장(전계)이온현미경(Field Ion Microscope)실험을 통하여 GFIS기반으로 생성된 이온빔의 형상을 보여준다. 또한 높은 각전류밀도 구현을 위하여 질소가스 에칭으로 텅스텐 팁 끝 단원자에서만 이온빔을 생성하고, 각전류 밀도 계산과 안정도 실험결과로 본 연구에서 개발한 이온원이 이온총으로서의 이온현미경 적용 가능성에 대해 보여준다.

• BMB Reports
• /
• v.38 no.3
• /
• pp.307-313
• /
• 2005

Thiobacillus ferrooxidans is one of the most important bacterium used in bioleaching, and can utilize $Fe^{2+}$ or sulphide as energy source. Growth curves for Thiobacillus ferrooxidans have been tested, which show lag, logarithmic, stationary and aging phases as seen in other bacteria. The logarithmic phases were from 10 to 32 hours for Thiobacillus ferrooxidans cultivated with $Fe^{2+}$ and from 4 to 12 days for Thiobacillus ferrooxidans cultivated with elemental sulphur. Differences of protein patterns of Thiobacillus ferrooxidans growing on elemental sulphur and $Fe^{2+}$ separately were investigated after cultivation at $30^{\circ}C$ by the analysis of two-dimensional gel electrophoresis (2-DE), matrix-assisted laser desorption/ ionization (MALDI)-Mass spectrometry and ESI-MS/MS. From the 7 identified protein spots, 11 spots were found more abundant when growing on elemental sulphur. By contrast 6 protein spots were found decreased at elemental cultivation condition. Among the proteins identified, cytochrome C have been previously identified as necessary elements of electron-transfering pathway for Thiobacillus ferrooxidans to oxidize $Fe^{2+}$; ATP synthase alpha chain and beta are expressed increased when Thiobacillus ferrooxidans cultivated with $Fe^{2+}$ as energy source. ATP synthase Beta chain is the catalytic subunit, and ATP synthase alpha chain is a regulatory subunit. The function of ATPase produces ATP from ADP in the presence of a proton gradient across the membrane.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.4 no.4
• /
• pp.2-12
• /
• 1967

A pair of insulated-gate metal-oxide-semiconductor field-effect transistor has been used to measure the direct current produced from the ionization chamber in the range of to A. An analisis of direct-current differential amplifier giving the expressions of the common-mode rejection ratio and the rralization of the constant-current generator to give very large effective source resistance has been presented. Voltage gain is 6.6, drift at the room temperature is 1.5mv per day. The common-mode rejection ratio is obtained maximum 84db. These facts give the feasibility of small direct-current measurements by utilizing this type transistors.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.112-120
• /
• 1996

With the MOsES (mask oxide sidewall etch scheme)process which uses the conventional i-line stepper and isotropic wet etching, CMOSFET's with fine gate pattern of 0.1.mu.m CMOSFET device, the screening oxide is deposited before the low energy ion implantation for source/drain extensions and two step sidewall scheme is adopted. Through the characterization of 0.1.mu.m CMOSFET device, it is found that the screening oxide deposition sheme has larger capability of suppressing the short channel effects than two step sidewall schem. In cse of 200.angs.-thick screening oxide deposition, both NMOSFET and PMOSFET maintain good subthreshold characteristics down to 0.1.mu.m effective channel lengths, and show affordable drain saturation current reduction and low impact ionization rates.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.571-580
• /
• 1998

The numerical model that can describe the ignition of pseudospark discharge using hybrid fluid-particle(Monte Carlo )method has been developed. This model consists of the fluid expression for transport of electrons and ions and Poisson's equation in the electric field. The fluid equation determines the spatiotemporal dependence of charged particle densities and the ionization source term is computed using the Monte carlo method. This model has been used to study the evolution of a discharge in Argon at 0.5 torr, with an applied voltage if 1kV. The evolution process of the discharge has been divided into four phases along the potential distribution : (1) Townsend discharge, (2) plasma formation, (3) onset of hollow cathode effect, (4) plasma expansion. From the numerical results, the physical mechanisms that lead to the rapid rise in current associated with the onset of pseudospark could be identified.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.647-652
• /
• 2015

A fully coupled finite element analysis (FEA) technique was developed for analyzing the discharge phenomena and dielectric liquid flow while considering surface charge density effects in dielectric flow guidance. In addition, the simulated speed of surface charge propagation was compared and verified with the experimental results shown in the literature. Recently, electrohydrodynamics (EHD) techniques have been widely applied to enhance the cooling performance of electromagnetic systems by utilizing gaseous or liquid media. The main advantage of EHD techniques is the non-contact and low-noise nature of smart control using an electric field. In some cases, flow can be achieved using only a main electric field source. The driving sources in EHD flow are ionization in the breakdown region and ionic dissociation in the sub-breakdown region. Dielectric guidance can be used to enhance the speed of discharge propagation and fluidic flow along the direction of the electric field. To analyze this EHD phenomenon, in this study, the fully coupled FEA was composed of Poisson's equation for an electric field, charge continuity equations in the form of the Nernst-Planck equation for ions, and the Navier-Stokes equation for an incompressible fluidic flow. To develop a generalized numerical technique for various EHD phenomena that considers fluidic flow effects including dielectric flow guidance, we examined the surface charge accumulation on a dielectric surface and ionization, dissociation, and recombination effects.

• Preventive Nutrition and Food Science
• /
• v.21 no.2
• /
• pp.124-131
• /
• 2016

Among 116 bacterial strains isolated from Korean fermented foods, one strain (SS-76) was selected for producing new oligosaccharides in a basal medium containing maltose as the sole source of carbon. Upon morphological characterization using scanning electron microscopy, the cells of strain SS-76 appeared rod-shaped; subsequent 16S rRNA gene sequence analysis revealed that strain SS-76 was phylogenetically close to Bacillus subtilis. The main oligosaccharide fraction B extracted from the culture supernatant of B. subtilis SS-76 was purified by high performance liquid chromatography. Subsequent structural analysis revealed that this oligosaccharide consisted only of glucose, and methylation analysis indicated similar proportions of glucopyranosides in the 6-linkage, 4-linkage, and non-reducing terminal positions. Matrix-assisted laser-induced/ionization time-of-flight/mass spectrometry and electrospray ionization-based liquid chromatography-mass spectrometry/mass spectrometry analyses suggested that this oligosaccharide consisted of a trisaccharide unit with 1,6- and 1,4-glycosidic linkages. The anomeric signals in the $^1H$-nuclear magnetic resonance spectrum corresponded to ${\alpha}$-anomeric configurations, and the trisaccharide was finally identified as panose (${\alpha}$-D-glucopyranosyl-1,6-${\alpha}$-D-glucopyranosyl-1,4-D-glucose). These results suggest that B. subtilis SS-76 converts maltose into panose; strain SS-76 may thus find industrial application in the production of panose.