• Membrane Journal
• /
• v.25 no.5
• /
• pp.440-446
• /
• 2015

Nanofiltration composite membranes were prepared through the ion exchange polymers coating onto the porous microfiltration polyethylene (PE) membrane surfaces the salting-out and phase separated and pressurization (PSP) methods. The existence of coating on the surfaces was confirmed by the scanning electronic microscopy. The resulting membranes were characterized under the various conditions, such as the coating material, coating time, ionic strength etc., in terms of flux and rejection for NaCl 100 ppm solution. Under the same coating conditions of 10,000 ppm coating solution concentration and 3 atm coating pressure for both the coating materials of PEI and PSSA_MA, the flux 91.2 LMH and rejection 64.6% were obtained for PEI whereas 122.7 LMH and 38.1% were observed for PSSA_MA. From this study, it may be concluded that the composite membrane preparation is possible.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1031-1037
• /
• 2018

The formation of a complex between PVP or HPC and iodine was indicated by a red shift in the tri-iode band while PVA-iodine complex showed its characterized band around 500 nm in pure aqueous media. Addition of surfactant SDS resulted in a disapperance of the characteristic blue color of the PVA-iodine complex indicating that the complex is not formed in aqueous surfactant media. However in case of PVP or HPC, presence of the monomers of SDS favored the complex formation but in higher concentration, the micelles of SDS decreased the complex. Complexation was found to increase with increasing content of n-propanol in the system since n-propanol inhibits the formation of gels or microgels in the polymer solution. But in case of PVA-iodine complex, addition of n-propanol led to conversion of bigger polyiodides into smaller ones, which is indicative of increased intermolecular hydrogen bond interaction between propanol and PVA effecting a decrease in the PVA aggregate space.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.258-263
• /
• 2023

In this study, conductive polymers and the enzyme tyrosinase (Tyr) were deposited on the surface of a screen printed carbon electrode (SPCE), which can be fabricated as a disposable sensor chip, and applied to the detection of bisphenol F (BPF), an endocrine disruptor with proven links to male diseases and thyroid disorders, using electrochemical methods. On the surface of the SPCE working electrode, which was negatively charged by oxygen plasma treatment, a positively charged conductive polymer, poly(diallyldimethyl ammonium chloride) (PDDA), a negatively charged polymer compound, poly(sodium 4-styrenesulfonate) (PSS), and another layer of PDDA were layered by electrostatic attraction in the order of PDDA, PSS, and finally PDDA. Then, a layer of Tyr, which was negatively charged due to pH adjustment to 7.0, was added to create a PDDA-PSS-PDDA-Tyr sensor for BPF. When the electrode sensor is exposed to a BPF solution, which is the substrate and target analyte, 4,4'-methylenebis(cyclohexa-3,5-diene-1,2-dione) is generated by an oxidation reaction with the Tyr enzyme on the electrode surface. The reduction process of the product at 0.1 V (vs. Ag/AgCl) generating 4,4'-methylenebis(benzene-1,2-diol) was measured using cyclic and differential pulse voltammetries, resulting in a change in the peak current with respect to the concentration of BPF. In addition, we compared the detection performance of BPF using an ionic liquid electrolyte as an alternative to phosphate-buffered saline, which has been used in many previous sensing studies. Furthermore, the selectivity of bisphenol S, which acts as an interfering substance with a similar structure to BPF, was investigated. Finally, we demonstrated the practical applicability of the sensor by applying it to analyze the concentration of BPF in real samples prepared in the laboratory.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.4
• /
• pp.271-276
• /
• 2006

Felodipine, a calcium-antagonist of dihydropyridine type, is a poorly water soluble drug and has very low bioavailability. As preceding studies, use of solid dispersion systems and surfactants(solubilizers) has been suggested to increase dissolution and to improve bioavailability of felodipine. But in case of solid dispersion systems, large amount of toxic organic solvents should be used and manufacturing process time become longer than conventional process. In case of using surfactants, as time elapsed, decreasing of dissolution rate of felodipine due to crystallization has been reported. In this study, Copovidon as a hydrophilic polymer and $Transcutol^{\circledR}$ as a surfactant were combined to formulations if order to increase dissolution of felodipine and conventional wet granulation process were applied to manufacturing of formulations. The effect of Copovidon and $Transcutol^{\circledR}$ on the dissolution oi felodipine was investigated in-vitro. When Copovidon and $Transcutol^{\circledR}$ used simultaneously, the dissolution rate of felodipine was prominently increased compared with when used separately and the maximum increase in the dissolution of felodipine was 5.8 fold compared to control. This is most probably due to synergy effect by combination of Copovidon and $Transcutol^{\circledR}$. Felodipine sustained release tablets were successfully formulated using several grades of HPMC as a release retarding agent. The stability of felodipine sustained release tablet was evaluated after storage at accelerated condition($40^{\circ}C/75%\;RH$) for 6months in HDPE(High density polyethylene) bottle. Neither significant degradation nor change of dissolution rate for felodipine was observed after 6months. In conclusion, felodipine sustained release tablet was successfully formulated and dissolution of felodipine, poorly water soluble drug, was prominently increased and also stability was guaranteed by using combination system of hydrophilic polymer and surfactant.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.211-218
• /
• 2018

Instant face lifting cosmetics contain various film forming agents for stretching the wrinkles on the skin surface. But, most of the film-forming polymers have sticky feels. And they are easily scrubbed out when skin is rubbed on. In this study, we focused on the influence of sodium silicate that has rapid film forming effect on skin surface and immediate wrinkle reducing effect. Sodium silicate, also known as water glass or soluble glass, is a compound containing sodium oxide and silica. Sodium silicate is a white powder that is readily soluble in water, producing an alkaline solution. Sodium silicate is stable in neutral and alkaline solutions. The sodium silicate solution hardens by drying in air and rapidly forms a thin film. When the solution is applied to the skin, the fine membrane coating is formed by water evaporation and ionic bond re-formation. It also makes the strong siloxane (Si-O) bonding on the skin surface. When these fixation properties are applied to cosmetics, they can give remarkable skin tightening effect. The sodium silicate solution can provide the lifting effect by forming a film on skin at a proper concentration. But, skin irritation may be caused with too high concentration of sodium silicate. We studied a desirable range of the sodium silicate concentration and combination with other fixatives for skin care formulation that has no sticky feels and no scrubbing out phenomenon. Immediate lifting gel was developed by using sodium silicate and various thickening systems. Among of the various thickeners, aluminum magnesium silicate showed the best compatibility with sodium silicate for rapid lifting effect. This instant physical lifting gel was confirmed as a low stimulating formula by skin clinical test.