• 한국입자에어로졸학회지
• /
• 제9권2호
• /
• pp.89-102
• /
• 2013

24-hr $PM_{2.5}$ samples were collected from January 19 through February 27, 2009 at an urban site of Gwangju and analyzed to determine the concentrations of organic and elemental carbon(OC and EC), water-soluble OC(WSOC), eight ionic species($Na^+$, $NH^{4+}$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, $Cl^-$, ${NO_3}^-$ and ${SO_4}^{2-}$), and 22 elemental species. Haze phenomena was observed during approximately 29%(10 times) of the whole sampling period(35 days), resulting in highly elevated concentrations of $PM_{2.5}$ and its chemical components. An Asian dust event was also observed, during which $PM_{2.5}$ concentration was 64.5 ${\mu}g/m^2$. Crustal materials during Asian dust event contributed 26.6% to the $PM_{2.5}$, while lowest contribution(5.1%) was from the haze events. OC/EC and WSOC/OC ratios were found to be higher during haze days than during other sampling days, reflecting an enhanced secondary organic aerosol production under the haze conditions. For an Asian dust event, enhanced concentrations of OC and secondary inorganic components were also found, suggesting the further atmospheric processing of precursor gases during transport of air mass to the sampling site. Correlations among WSOC, EC, ${NO_3}^-$, ${SO_4}^{2-}$, and primary and secondary OC fractions, which were predicted from EC tracer method, suggests that the observed WSOC could be formed from similar formation processes as those of secondary organic aerosol, ${NO_3}^-$ and ${SO_4}^{2-}$. Results from principal component analysis indicate also that the observed WSOC was strongly associated with formation routes of the secondary organic and inorganic aerosols.

• 한국대기환경학회지
• /
• 제13권6호
• /
• pp.439-450
• /
• 1997

Atmospheric fine particles $(PM_{2.5})$ were collected at the background sites, Kangwha, Taean, and Kosan and characterized to understand their behaviors at the sites. Daily samples of $PM_{2.5}$ mass were measured and ionic species, carbonaceous species, and gaseous species were analyzed. Four-day backward trajectory analysis was also carried out. The mean concentrations of anthropogenic species were highest at Kangwha among three sites, while contributions from sea salts wree highest at Taean during the measurement period due to higher wind speed at Taean. Major chemical components in fine particles were sulfate, organic carbon, nitrate, and ammoniu. Most of the non-sea-salt (nss) sulfates in $PM_{2.5}$ might be present as ammonium sulfates at these sites. Most air parcels arriving at Kangwha and Taean were from northern China. Therefore, both sites were thought to be affected by the same air parcel. At Kosan, during the measurement period, air parcels were from either northern China or sourthern China. The nss sulfate concentration in the air parcels from southern China was higher, while the nss calcium, nitrate, and ammonium concentrations were higher when the air parcels were from northern China.

• KSBB Journal
• /
• 제11권2호
• /
• pp.140-150
• /
• 1996

가정용 혈중 cholesterol 측정시스템을 개발하고자, 그 성능을 조절할 수 었는 벤수들의 최적화가 수 행되었다. 시스템의 주요 구성성분은 분석에 요구되는 효소들 (cholesterol esterase, cholesterol oxidase, 그리고 horseradish peroxidase) 이 부동화된 nitrocellulose membrane strip과 비 이온세척제 (Tri­t ton X-1OO) 및 발색물질 (3,3'-diaminobenzidine) 이 포함된 시료운반용액이다. 시료와 운반용액이 훈 합된 수용액을 membrane의 하단으로부터 흡수시키 면 모세관현상에 의해 시료는 부통화된 효소층으로 전달되어 연속효소반응이 일어난다. 마지막 효소반 응에서 발색물질은 산화되고 그에 따라 cholesterol 농도에 비례한 특정색이 신호로써 발생된다. 그 신호세기에 대해 효소들의 부동화조건과 운반용액의 화학조성이 최적화되었다. 최적조건 하에서 구성된 측정시스템의 농도응탑곡선은 혈중 cholesterol 농도를 측정하기에 충분히 높은 민감도를 나타내었다.

• 한국대기환경학회지
• /
• 제16권4호
• /
• pp.415-420
• /
• 2000

The daily mean concentrations of PM2.5 mass ionic species carbonaceous species and HNO3, HCl, and NH3 were analyzed at three background sites in Korea : Kangwha, Kosan, and Dongbaik during two intensive field studies between December 1996 and January 1997, Four-day backward trajectory analysis was also carried out. The mean concentrations of anthropogenic species were higher at Kangwha and Dongbaik than Kosan. At these two sites themean concentrations of nitrate and ammonium/ammonia were higher than those of Kosan. It was suggested that these two sites be considered as the background sites of the Seoul Metropolitan Area and Pusan respectively. Major chemical components in fine particles were sulfate organic carbon nitrate and ammonium for all the sites. More than 90% of sulfate were non-sea-salt(nss) sulfates and most of the nss sulfate in PM2.5 might be present as ammonium sulfates at all sites. Most of air parcels arriving a Kangwha and Dongbaik were from the northern China. At Kosan during the measurement period half of air parcels were from the northern China and the other half from the southern China. At Kosan the concentrations of anthropogenic air pollutants originated from the southern China were higher than those typically observed from the northern China.

• Asian Journal of Atmospheric Environment
• /
• 제3권1호
• /
• pp.42-51
• /
• 2009

Saturated n-dicarboxylic acids ($C_2-C_7$, $C_9$), unsaturated dicarboxylic acids (maleic, fumaric, phthalic acid), ketocarboxylic acids (pyruvic, glyoxylic acid), and dicarbonyls (glyoxal, methylglyoxal) were determined in size-segregated samples with a high-volume Andersen air sampler at a suburban site in Saitama, Japan, May 12-17 and July 24-27, 2007 and January 22-31, 2008. The seasonal average concentrations of these detected organic acids were 670 $ng/m^3$, accounting for about 4.4-5.7% (C/C) of water-soluble organic carbon (WSOC) and 2.3-3.6% (C/C) of organic carbon (OC). The most abundant species of dicarboxylic acids was oxalic acid, followed by malonic, phthalic, or succinic acids. Glyoxylic acid and methyglyoxal were most abundant ketocarboxylic acid and dicarbonyl, respectively. Seasonal differences, size-segregated concentrations, and the correlations of these acids with ambient temperatures, oxidants, elemental carbon (EC), OC, WSOC, and ionic components were also discussed in terms of their corresponding sources and possible secondary formation pathways. The results suggested that photochemical reactions contributed more to the formation of particulate organic acids in Saitama suburban areas than did direct emissions from anthropogenic and natural sources. However, direct emissions of vehicles were also important sources of several organic acids in particles, such as phthalic and adipic acids, especially in winter.

• 한국대기환경학회지
• /
• 제14권6호
• /
• pp.589-598
• /
• 1998

This study was conducted to investigate the chemical characteristics of Precipitation at Seoul, Yangpyong, Hongchon and Inje in the central part of Korean peninsula during the period from March 1994 to November 1997. The precipitation samples were collected by automatic wet-only sampler. The samples were analyzed for major anions (SO42-, NO3-, Cl-, F-) and cations(NH4+, Ca2+, Mg+, Na+, K+), in addition to acidity and electrical conductivity. The analytical instrument for water soluble ionic components was ion chromatography. The volume - weighted mean PH were 4.73, 4.87, 4.89 and 4.81 at Seoul, Yangpyong, Hongchon and Inje, respectively. The sums of cation concentrations was slightly greater than the sums of anion concentrations. Also, the highest ion component was SO42- in anions and NH4+ in cations. The mean equivalent ratios of SO42- to NO3- were found by 2.96, 2.71, 2.43 and 2.25 at Seoul, Yangpyong, Hongchon and Inje, respectively. The factor analysis was conducted in order to make the large and diverse data set as manageable levels and to qualitatively examine the relationship between the variables. It showed that major sources of pollutants in precipitation were from the anthropogenic in Seoul, the natural in Hongchon, and the anthropogenic and natural in Yangpyong and Inje.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.86-91
• /
• 2010

Among various fuel cells, solid oxide fuel cells (SOFCs) offer the highest energy efficiency, when taking into account the thermal recycling of waste heat at high temperature. However, the highest efficiency and lowest pollution for a SOFC can be achieved through the sophisticated control of its constituent components such as electrodes, electrolytes, interconnects and sealing materials. The electrochemical conversion efficiency of a SOFC is particularly dependent upon the performance of its electrode materials. The electrode materials should meet highly stringent requirements to optimize cell performance. In particular, both mass and charge transport should easily occur simultaneously through the electrode structure. Matter transport or charge transport is critically related to the configuration and spatial disposition of the three constituent phases of a composite electrode, which are the ionic conducting phase, electronic conducting phase, and the pores. The current work places special emphasis on the quantification of this complex microstructure of composite electrodes. Digitized images are exploited in order to obtain the quantitative microstructural information, i.e., the size distributions and interconnectivities of each constituent component. This work reports regarding zirconia-based composite electrodes.

• Journal of Pharmaceutical Investigation
• /
• 제31권1호
• /
• pp.19-25
• /
• 2001

The purpose of this study was to use a ternary polymeric matrix system for high drug loading of a highly soluble drug for controlled release delivery. The controlled drug delivery of diltiazem HCl (solubility > 50% in water at $25^{\circ}C$) with high loading dose (the final loading dose of drug was 34%) from a ternary polymeric matrix (gelatin, pectin, HPMC) was successfully accomplished. This simple monolithic system with 240 mg drug loading provided near zero-order release over a 24 hour-period by which time the system was completely dissolved. The release kinetics of diltiazem HCl tablet with high loading dose from the designed ternary polymeric system was dependent on the ratios of HPMC : pectin binary mixture. The release rate increased as pectin : HPMC ratio were increased. Swelling behavior of the ternary system and the ionic interaction of formulation components with cationic diltiazem molecule appear to control drug diffusion and the release kinetics. Comparable release profiles between commercial product and the designed system were obtained. The binding study between gelatin with diltiazem HCl showed the presence of two binding sites for drug interaction with subsequent controlled diffusion upon swelling. This designed delivery system is easy to manufacture and drug release behavior is highly reproducible and offers advantages over the existing commercial product.

• 멤브레인
• /
• 제22권5호
• /
• pp.285-300
• /
• 2012

바나듐 흐름전지는 오랜 사이클 수명, 높은 에너지효율, 낮은 제조단가 그리고 친환경성으로 인하여 에너지저장장치의 한 부분이 될 것으로 기대되고 있다. 바나듐 흐름전지 시스템의 핵심 부품의 하나로서 이온교환막은 이온이 계속적으로 전달되는 동안 양극과 음극 전해질의 투과를 저해하는 물성이 요구된다. 그러나 Nafion과 같은 이온교환막은 넓은 시장성의 확보를 위한 목표성능의 달성을 위한 몇가지 과제들에 직면하고 있다. 그러므로 이러한 문제들을 해결하기 위하여 최근까지 개발된 여러가지 이온교환막에 대하여 Nafion과 비교하여 바나듐 흐름전지특성에 대하여 조사하였다.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.474-480
• /
• 2022

Lithium-ion batteries (LIBs) are powerful energy storage devices with several advantages, including high energy density, large voltage window, high cycling stability, and eco-friendliness. However, demand for ultrafast charge/discharge performance is increasing, and many improvements are needed in the electrode which contains the carbon-based active material. Among LIB electrode components, the conductive additive plays an important role, connecting the active materials and enhancing charge transfer within the electrode. This impacts electrical and ionic conductivity, electrical resistance, and the density of the electrode. Therefore, to increase ultrafast cycling performance by enhancing the electrical conductivity and density of the electrode, we complexed Ketjen black and graphene and applied conductive agents. This electrode, with the composite conductive additives, exhibited high electrical conductivity (12.11 S/cm), excellent high-rate performance (28.6 mAh/g at current density of 3,000 mA/g), and great long-term cycling stability at high current density (88.7 % after 500 cycles at current density of 3,000 mA/g). This excellent high-rate performance with cycling stability is attributed to the increased electrical conductivity, due to the increased amount of graphene, which has high intrinsic electrical conductivity, and the high density of the electrode.