Browse > Article
http://dx.doi.org/10.4191/KCERS.2010.47.1.086

Microstructural Characterization of Composite Electrode Materials in Solid Oxide Fuel Cells via Image Processing Analysis  

Bae, Seung-Muk (Department of Materials Science and Engineering, Hongik University)
Jung, Hwa-Young (Center for Energy Materials Research Korea Institute of Science and Technology)
Lee, Jong-Ho (Center for Energy Materials Research Korea Institute of Science and Technology)
Hwang, Jin-Ha (Department of Materials Science and Engineering, Hongik University)
Publication Information
Journal of the Korean Ceramic Society / v.47, no.1, 2010 , pp. 86-91 More about this Journal
Abstract
Among various fuel cells, solid oxide fuel cells (SOFCs) offer the highest energy efficiency, when taking into account the thermal recycling of waste heat at high temperature. However, the highest efficiency and lowest pollution for a SOFC can be achieved through the sophisticated control of its constituent components such as electrodes, electrolytes, interconnects and sealing materials. The electrochemical conversion efficiency of a SOFC is particularly dependent upon the performance of its electrode materials. The electrode materials should meet highly stringent requirements to optimize cell performance. In particular, both mass and charge transport should easily occur simultaneously through the electrode structure. Matter transport or charge transport is critically related to the configuration and spatial disposition of the three constituent phases of a composite electrode, which are the ionic conducting phase, electronic conducting phase, and the pores. The current work places special emphasis on the quantification of this complex microstructure of composite electrodes. Digitized images are exploited in order to obtain the quantitative microstructural information, i.e., the size distributions and interconnectivities of each constituent component. This work reports regarding zirconia-based composite electrodes.
Keywords
Image analysis; Solid oxide fuel cells; Electrodes; Microstructure;
Citations & Related Records

Times Cited By SCOPUS : 0
연도 인용수 순위
  • Reference
1 B.C.H. Steele and A. Heinzel, “Materials for Fuel-cell Technologies,” Nature, 414 345-52 (2001).   DOI
2 J. M. Ralph, A. C. Schoeler and M. Krumpelt, “Materials for Lower Temperature Solid Oxide Fuel Cells,” J. Mat. Sci., 36, 1161-72 (2001).   DOI
3 N.Q. Minh, “Solid Oxide Fuel Cell Technology-features and Applications,” J. Am. Ceram. Soc., 76 [3] 563-88 (1993).   DOI
4 D. Simwonis, F. Tietz, and H. Tagawa, “Nickel Coarsening In Annealed Ni/8YSZ Anode Substrates for Solid Oxide Fuel Cells,” Solid State Ionics, 132 241-51 (2000).   DOI   ScienceOn
5 K.B. Alexander, P.F. Becher, S.B. Waters, and A. Bleier, “Quantitative Analysis of Microstructure and Its Related Electrical Property of SOFC Anode, Ni–YSZ Cermet,” J. Am. Ceram. Soc., 77 [4] 939-46 (1994).   DOI
6 C.S. Smith and L. Guttman, “Measurement of Internal Boundaries in Three Dimensional Structure by Random Sectioning,” Trans. Metall. Soc. AIME, 197 81-7 (1953).
7 J.W. Cahn and J.E. Hilliard, “The Measurement of Grain Contiguity in Opaque Samples,” Trans. Metall. Soc AIME, 215 759-61(1959).
8 K.-R. Lee, S.H. Choi, J. Kim, H.-W. Lee, and J.-H. Lee, “Viable Image Analyzing Method to Characterize the Microstructure and the Properties of the Ni/YSZ Cermet Anode of SOFC,” J. Power Sources., 140 226-34 (2005).   DOI
9 S. Tao and J.T.S. Irvine, “Discovery and Characterization of Novel Oxide Anodes for Solid Oxide Fuel Cells,” The Chemical Record., 4, 83-5 (2004).   DOI
10 E. Doshi, Von. L. Richards, J.D. Carter, X. Wang and M. Krumpelt, “Development of Solid Oxide Fuel Cells that Operate at 500oC,” J. Electrochem. Soc., 146 [4] 1273-78 (1999).   DOI
11 S.M. Bae, K.-S. Kang, C.-S. Park, and J. H. Hwang, “Microstructural Characterization of Multiphase GDC/NiO Components Using Image Processing,” J. ceram. processing Research., in press.
12 H. Y. Jung, K.-S. Hong, H. Kim, J.-K. Park, J.-W. Son, J. Kim, H.-W. Lee, and J.-H. Lee, “Characterization of Thinfilm YSZ Deposited Via EB-PVD Technique in Anodesupported SOFCs,” J. Electrochem. Soc., 153 A961-66 (2006).   DOI
13 H.Y. Jung, W.-S. Kim, S.-H. Choi, H. Kim, J. Kim, H.-W. Lee, and J.-H. Lee, “Effect of Cathode Current-collecting Layer on Unit-cell Performance of Anode-supported Solid Oxide Fuel Cells,” J. Power Sources, 155 145-51 (2006).   DOI   ScienceOn
14 H.-G. Jung, Y.-K. Sun, H.Y. Jung, J.S. Park, H.-R. Kim, G.-H. Kim, H.W. Lee, and J.-H. Lee, “Investigation of Anodesupported SOFC with Cobalt-containing and Cathode and GDC Interlayers,” Solid State Ionics, 179 1535-39 (2008).   DOI   ScienceOn