• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.279-285
• /
• 2012

The co-precipitation technique has been applied to synthesize Biphasic Calcium Phosphate (BCP), Mg-BCP and Si-BCP. X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) spectroscopy were used to characterize the structure of synthesized BCP, Mg-BCP and Si-BCP powders. The results have shown that BCP and substitution of magnesium and silicon in the calcium deficient apatites revealed the formation of biphasic mixtures of Hydroxyapatite (HAp)/${\beta}$-Tricalcium phosphate (${\beta}$-TCP) ratios after heating at $1000^{\circ}C$. Ionic substituted BCP is able to develop a new apatite phase on the surface in contact with physiological fluids faster than BCP does. An MTT assay indicated that BCP, Mg-BCP, and Si-BCP powders had no cytotoxic effects on MG-63 cells, and that they have good biocompatibility.

• Journal of Environmental Science International
• /
• v.7 no.5
• /
• pp.707-716
• /
• 1998

The chemical characteristics of precipitation was investigated in Pusan area. Samples were collected from January to November in 1996 at 4 sites, and analyzed pH, major soluble ionic components(C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, N $a^{+}$, $K^{+}$, N $H_4$$^{+}$, $Mg^{2+}$, $Ca^{2+}$). The order of anion and cation concentrations for the initial precipitation were C $l^{[-10]}$ ＞ S $O_4$$^{2-}$ ＞ N $O_3$$^{[-10]}$ , and $Ca^{2+}$ ＞ N $a^{+}$ ＞ N $H_4$$^{+}$ ＞ $Mg^{2+}$ ＞ $K^{+}$, respectively. At coastal sites(P1 and P2) C $l^{[-10]}$ and N $a^{+}$ of maritime sources (seasalt) were high, but at inland sites(P3 and P4) nss-C $a^{2+}$ and nss-S $O_4$$^{2-}$ were high. Calcium ion for the initial precipitation showed high value of enrichement factor(EF) relative to seawater composition. The contribution of seasalt to the composition of precipitation was higher at bite P1 (53.5%) than those of the other sites. Throughout the year the concentrations of major ions for the initial precipitation were low in the heavy rain season. The mean pH for the initial precipitation was 5.4 and showed the negative relationship with the precipitaion amount. The S $O_4$$^{2-}$ and N $O_3$$^{[-10]}$ do not play an important role in rain acidification due to the high(97%) neutralizing effect of amonia and calcium species.and calcium species.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.111-120
• /
• 2001

Calcium hydroxide pastes is widely used in conventional endodontics. Along with the expanded clinical use of calcium hydroxide, literatures suggest mixing calcium hydroxide with other substance. Among added substances the vehicle plays the most importance role in the overall process because it is directly related with the velocity of ionic dissociation of $Ca^{2+}$ and OH ion. In this study, we evalutated and compared periapical tissue response and root resorption after canal was filled with mixture of saline and calcium hydroxide(Junsei Chemical Co.. Japan) as a aqueous vehicle, Metapaste(Meta Co., Korea) as a viscous vehicle paste, Vitapex(Neo Dental, Japan) as a oily vehicle paste and IRM(Caulk Dentsply, USA) in replantation of rat molar. A total of 31 maxillary first molars of Sprague-Dawley female rats, 30 days old were used. The upper 1st molar was extracted and the mesiobuccal canal was filled with mixture of saline and calcium hydroxide, Metapaste, Vitapex. IRM and then replanted. Rats were sacrificed 3 weeks after replantation. the maxillae were removed. section of 4 micron were cut and stained with hematoxylin-eosin, Apical tissue response were observed under light microscope. The results were as follows: 1. Saline mixing group and Metapaste group were significant different in fibrous capsule width compared to Vitapex group and IRM group(P<0.05). 2. Saline mixing group. Metapaste group. Vitapex group and IRM group did not prevent root resorption and there were no statistical difference. 3. In saline mixing group and Metapaste group. loss of pastes were observed in all samples. From the results of our study. we observed loss of pastes in saline mixing group and Metapaste group because of water soluble property and assumed it was related to inflammation in apical area and sealing ability of material. So, we should study and develop calcium hydroxide vehicle which is easily removed and more stable and because of only 3 weeks observation we need more evaluation in long period.

• Macromolecular Research
• /
• v.17 no.10
• /
• pp.776-784
• /
• 2009

N,N-dimethyldodecylamine (tertiary amine)-modified MMT (DDA-MMT) was prepared as an organically modified layered silicate (OLS), after which styrene-butadiene rubber (SBR) nanocomposites reinforced with the OLS were manufactured via the latex method. The layer distance of the OLS and the morphology of the nanocomposites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). By increasing the amount of N,N-dimethyldodecylamine (DDA) up to 2.5 g, the maximum values of torque, tensile strength and wear resistance of the SBR nanocomposites were increased due to the increased dispersion of the silicate layers in the rubber matrix and the increased crosslinking of the SBR nanocomposites by DDA itself. When SBR nanocomposites were manufactured by using the ternary filler system (carbon black/silica/OLS) to improve their dynamic properties as a tire tread compound, the tan $\delta$(at $0^{\circ}C$ and $60^{\circ}C$) property of the compounds was improved by using metal stearates instead of stearic acid. The mechanical properties and wear resistance were increased by direct substitution of calcium stearate for stearic acid because the filler-rubber interaction was increased by the strong ionic effect between the calcium cation and silicates with anionic surface. However, as the amount of calcium stearate was further increased above 0.5 phr, the mechanical properties and wear resistance were degraded due to the lubrication effect of the excessive amount of calcium stearate. Consequently, the SBR/organoclay nanocomposites that used carbon black, silica, and organoclay as their ternary filler system showed excellent dynamic properties, mechanical properties and wear resistance as a tire tread compound for passenger cars when 0.5 phr of calcium stearate was substituted for the conventionally used stearic acid.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.112-116
• /
• 2005

We investigated the surface modification method for the preparation of organic-inorganic hybrid composite thin film. Gelatin obtained from the decomposition of collagen was allowed to adsorb in a polystyrene tissue culture dish for 2 h to from layers of gelatin. Supersaturated ionic solution of calcium and phosphorus was injected on the gelatin adsorbed layer to form calcium phosphate thin film. During the initial period of incubation, nucleates were formed. With increase of the incubation time, CaP (calcium phosphate) thin film grew on the surface of the culture dish. The gelatin/CaP thin film displayed the highly porous three-dimensional surface structure. Attenuated, total reflectance Fourier transform, infra-red spectroscopy (ATR-FTIR) was used to analyze the chemical properties of CaP film. The analysis demonstrated that the CaP film formed at initial period of treatment appeared to be amorphous. With increase of incubation time, the crystallinity of the film was slightly increased, but the presence of the peaks for the low crystalline CaP confirmed that the CaP thin film prepared in this study was poorly crystallized.

• Restorative Dentistry and Endodontics
• /
• v.15 no.1
• /
• pp.33-43
• /
• 1990

Reactions of polyacrylic acid with hydroxyapatite, enamel and dentin were examined using infrared spectroscopy for the detection of $COO^-$ ions bonded to substrates. And also atomic aboscorption spectrophotometry and visible spectrophotometry were used to analyze the concentrations of calcium and phosphorus in the filtered solutions. The results were as follows. 1. Chemical adhesion of poly acrylic acid to hydroxyapatite, enamel and dentin was observed by infrared spectroscopy. 2. More calcium and phosphorus were detected in the filtered solutions of sodium polyacrylate-reacted specimens than in the filtered solutions of deionized Water-reacted specimens. 3. Mechanism of adhesion of polyacrylate to substrates is postulated that the bond is ionic in nature by displacement of $Ca^{2-}$ and ${PO_4}^3$ ions from the surface of substrates.

• Membrane and Water Treatment
• /
• v.5 no.3
• /
• pp.221-233
• /
• 2014

Simulations were conducted to predict supersaturation along Reverse Osmosis (RO) modules for seawater desalination. The modeling approach is based on the use of conservation principles and chemical equilibria equations along RO modules. Full Pitzer ion interactive forces model for concentrated solutions was implement to calculate activity coefficients. An average rejection rate for all ionic species was considered. Supersaturation has been used to assess scaling. Supersaturations with respect to all calcium carbonate forms and calcium sulfate were calculated up to 50% recovery rate in seawater RO desalination. The results for four different seawater qualities are shown. The predictions were in a good agreement with the experimental results.

• Journal of Nutrition and Health
• /
• v.29 no.9
• /
• pp.1042-1048
• /
• 1996

In order to investigate heating rate of commercial milk products in korean market, lactulose content and availability of calcium and ascorbic acid were measured. The pH range for raw and commercial milk was 6.5-6.75, and protein content was 2.5-3.13%. The acid degree value (。SH)showed between 5.3 and 7.1. There were no differences in pH, protein and acid degree among 3 types of milk. The portion ionic Ca content in UHT-milk(32.4%) and pasteurized milk (27%) increased significantly in comparison with raw milk (4.6%). Pasteurization led to loss of 20% ascorbic acid, and losses of UHT-treatment are approximately twice as high. Significant differences of lactulose content between UHT milk and pasteurized milk were observed. Some of UHT milk products showed very high value of lactulose content like sterilized milk. It is well known that the stress caused by indirect UHT treatment is slightly higher compared with the direct process. The results in this experiment suggested that most of UHT milk in korean market may be treated by indirect UHT method. In oder to keep the adventages of milk component, the heating methods of milk have to be reconsidered.

• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.5
• /
• pp.241-246
• /
• 2002

We studied the excitatory action of morphine on the responses of dorsal horn neuron to iontophoretic application of excitatory amino acid and C-fiber stimulation by using the in vivo electrophysiological technique in the rat. In 137 of the 232 wide dynamic range (WDR) neurons tested, iontophoretic application of morphine enhanced the WDR neuron responses to N-methyl-D-aspartate (NMDA), kainate, and graded electrical stimulation of C-fibers. Morphine did not have any excitatory effects on the responses of low threshold cells. Morphine-induced excitatory effect at low ejection current was naloxone-reversible and reversed to an inhibitory action at high ejection current. NMDA receptor, calcium channel and intracellular $Ca^{2+}$ antagonists strongly antagonized the morphine-induced excitatory effect. These results suggest that changes in intracellular ionic concentration, especially $Ca^{2+},$ play an important role in the induction of excitatory effect of morphine in the rat dorsal horn neurons.

• The Korean Journal of Pharmacology
• /
• v.8 no.2
• /
• pp.55-61
• /
• 1972

Superprecipitation of actomyosin has been considered to be an in vitro model of the muscle contraction. The superprecipitation and ATPase activity (which supplies the energy for contraction) are influenced by several factors which are the large amount of changes in ionic strength, Mg and ATP concentrations. But those behaviors are found to be promptly influenced by the change in a small range of calcium concentration which can be controlled by the cellular function of muscle physiologically only in the presence of the modullatory proteins, tropomyosin and troponin. In order to elucidate the precise roles of calcium in the muscle contraction and relaxation, the effects of calcium on the actin- myosin interaction was observed in the presence of tropomyosin and troponin using the superprecipitation system. The results are summarized as follows: 1. EGTA (glycol ether diaminetetraacetic acid)prolonged the initiation of the superprecipitation of natural actomyosin. 2. Superprecipitation curve was declined by adding EGTA at the time when tile curve reached the half- maximum. The degree of declining was proportional to the amount of EGTA added. Especially, upon adding 0.25 mM EGTA the curve was lowered to the level before the protein superprecipitated. But addition of EGTA did not affect the curve after attaining the maximum. 3. Superprecipitation of Perry myosin B was not affected by EGTA added both before and during the course of the reaction. 4. Tropomyosin did not change the response of Perry myosin B to EGTA added at any time of the reaction. 5. Troponin also did not change the response of Perry myosin B to EGTA. 6. Both tropomyosin and troponin together rendered the Perry myosin B to obtain the same response as natural actomyosin to EGTA. 7. It was concluded that actin-myosin interaction was influenced by the minute change of calcium concentration only in the presence of both tropomyosin and troponin. We could reproduce the contraction and relaxation of the muscle in vitro under the presence of ATP by changing the calcium concentration.