• Carbon letters
• /
• v.26
• /
• pp.18-24
• /
• 2018

Pollution of chloride ion-reinforced concrete can trigger active corrosion processes that reduce the useful life of structures. Multifunctional materials used as a counter-electrode by electrochemical techniques have been used to rehabilitate contaminated concrete. Cement-based pastes added to carbonaceous material, fibers or dust, have been used as an anode in the non-destructive Electrochemical Chloride Extraction (ECE) technique. We studied the performance of the addition of Carbon Fiber (CF) in a cement-graphite powder base paste used as an anode in ECE of concretes contaminated with chlorides from the preparation of the mixture. The experimental parameters were: 2.3% of free chlorides, 21 days of ECE application, a Carbon Fiber Volume Fraction (CFVF) of 0.1, 0.3, 0.6, 0.9%, a lithium borate alkaline electrolyte, a current density of $4.0A/m^2$ and a cement/graphite ratio of 1.0 for the paste. The efficiency of the ECE in the traditional technique using metal mesh as an anode was 77.6% and for CFVF of 0.9% it was 90.4%, with a tendency to increase to higher percentages of the CFVF in the conductive cement-graphite paste, keeping the pH stable and achieving a homogeneous ECE in the mass of the concrete contaminated with chlorides.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.2
• /
• pp.101-108
• /
• 2012

The purpose of this study was to improve the conductivity of $Li_3V_2(PO_4){_3}$ by adding carbon source so that the discharge rate and cyclic properties were improved. Glucose and CNT were added to $Li_3V_2(PO_4){_3}$ and the structure and electrochemical properties were studied. $Li_3V_2(PO_4){_3}$, $Li_3V_2(PO_4){_3}$/C and $Li_3V_2(PO_4){_3}$/CNT were synthesised by solid state reaction using hydrogen reduction method at 600, 700, 800, $900^{\circ}C$. The cathode materials were assembled to coin cell type 2032 with Lithium metal as a counter electrode. The coin cell was galvanostatically evaluated in the voltage range of 3.0~4.8 V.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.943-949
• /
• 1998

This study is concerned with the treatment of landfill leachate by carrier meditated emulsion. Using the batch operation, the optimum conditions for the removal of anionic and cationic materials were obtained. The landfill leachate from the plant was experimented under these conditions. The experimental variables were surfactant (Arlacel80) concentration and carrier(Aiquat336, DEHPA) concentration in membrane phase and counter ion concentration in internal phase. More than 80%(COD) of landfill leachate component could be removed within 12 minutes. The most crucial experimental variable for the removal efficiency was carrier concentration in membrane phase. In the other variables, the reaction time was more effected than the removal efficiency.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.13
• /
• pp.5371-5376
• /
• 2015

Berberine (B1), isolated from stems of Coscinium fenestratum (Goetgh.) Colebr, was used as a principle structure to synthesize three phenolic derivatives: berberrubine (B2) with a single phenolic group, berberrubine chloride (B3) as a chloride counter ion derivative, and 2,3,9,10-tetra-hydroxyberberine chloride (B4) with four phenolic groups, to investigate their direct and indirect antioxidant activities. For DPPH assay, compounds B4, B3, and B2 showed good direct antioxidant activity ($IC_{50}$ values=$10.7{\pm}1.76$, $55.2{\pm}2.24$, and $87.4{\pm}6.65{\mu}M$, respectively) whereas the $IC_{50}$ value of berberine was higher than $500{\mu}M$. Moreover, compound B4 exhibited a better DPPH scavenging activity than BHT as a standard antioxidant ($IC_{50}=72.7{\pm}7.22{\mu}M$) due to the ortho position of hydroxyl groups and its capacity to undergo intramolecular hydrogen bonding. For cytotoxicity assay against human fibrosarcoma cells (HT1080) using MTT reagent, the sequence of $IC_{50}$ value at 7-day treatment stated that B1 < B4 < B2 ($0.44{\pm}0.03$, $2.88{\pm}0.23$, and $6.05{\pm}0.64{\mu}M$, respectively). Berberine derivatives, B2 and B4, showed approximately the same level of CAT expression and significant up-regulation of SOD expression in a dose-dependent manner compared to berberine treatment for 7-day exposure using reverse transcription-polymerase chain reaction (RT-PCR) assays. Our findings show a better direct-antioxidant activity of the derivatives containing phenolic groups than berberine in a cell-free system. For cell-based system, berberine was able to exert better cytotoxic activity than its derivatives. Berberine derivatives containing a single and four phenolic groups showed improved up-regulation of SOD gene expression. Cytotoxic action might not be the main effect of berberine derivatives. Other pharmacological targets of these derivatives should be further investigated to confirm the medical benefit of phenolic groups introduced into the berberine molecule.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.197-201
• /
• 2014

TEPC (Tissue Equivalent Proportional Counter) was usually used for high LET radiation dosimetry. We developed a prototype TEPC for micro-dosimetry in the range of $0.2{\sim}300 keV/{\mu}m$. And, the simulated site diameter of the TEPC is $2{\mu}m$, of similar size to a cell nucleus. For purposes of characterization the response for high LET radiation of the TEPC has been investigated under 135MeV/u Carbon ions in HIMAC (Heavy Ion Medical Accelerator). We determined the gas multiplication factor and measured the lineal energy spectrum [yd(y)] of 135 MeV/u Carbon ions. The value of the gas multiplication factor was 315 at 700 V bias voltage. As a result of the experiment, we could more understand the performance of the TEPC for high LET (Linear Energy Transfer) radiation. And the procedure of high LET radiation dosimetry using TEPC is established.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.401-409
• /
• 1996

The effect of temperature on the cmc of sodium N-lauroyl-N-methyl taurate was examined. The cmc values were found to be decreased initially but increased further with the increase of temperature. From the temperature dependence of cmc, various thermodynamic properties were calculated. The effects of various electrolytes on the cmc of sodium N-lauroyl-N-methyl-taurate were also examined. The free energy of hydrophobic bond formation and the degree of dissociation of the micelles were calculated from log cmc vs. log counter ion concentration plots. The ${\Delta}H_m$ values were decreased with increasing the temperature and changed their signs from plus to minus at $40^{\circ}C{\sim}50^{\circ}C$. The ${\Delta}G_m$ values were decreased with the increase of electrolyte concentration and temperature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.6
• /
• pp.273-277
• /
• 2006

High velocity of oxy-fuel (HVOF) thermal spray coating is progressively replacing the other classical hard coatings such as chrome plating and ceramic coating by the classical methods, since the very toxic $Cr^{6+}$ ion is well known as carcinogen causing lung cancer, and the ceramic coatings are brittle. Co-alloy T800 powder is coated on the Inconel 718 substrates by the HVOF coating procesess developed by this laboratory. For the study of the possibility of replacing of chrome plating, the wear properties of HVOF Co-alloy T800 coatings are investigated using the reciprocating sliding tester with a counter sliding SUS 304 ball both at room and at an elevated temperature of $1000^{\circ}F\;(538^{\circ}C)$. The possibility as durability improvement coating is studied for the application to the high speed spindles vulnerable to frictional heat and wear. Wear mechanisms at the reciprocating sliding wear test are studied far the application to the systems similar to the sliding test such as high speed spindles. Wear debris and frictional coefficients of T800 coatings both at room and at an elevated temperature of $538^{\circ}C$ are drastically reduced compared to those of non-coated surface of Inconel 718 substrates. Wear traces and friction coefficients of both coated and non-coated surfaces are drastically reduced at a high temperature of $538^{\circ}C$ compared with those at room temperature. These show that the coating is highly recommendable far the durability Improvement coating on the surfaces vulnerable to frictional heat and wear.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.63-67
• /
• 2002

Silver-alginate and copper-alginate were prepared with Na-alginate extracted from marine brown algae(Sargassum fluitans). The antibacterial effect of Ag-alginate or Cu-alginate against Staphylococcus aureus and Escherichia coli was carried out by measuring optical density of liquid culture at 600 nm. The cell growth of Staphylococcus aureus and Escherichia coli was very active at pH 7, and was inhibited by adding Ag-alginate with more than 0.006 wt.% of silver content. The antibacterial effect of Ag-alginate against S. aureus and E. coli was better than that of Cu-alginate at the same metal concentration. The cell growth of S. aureus was less inhibitory than E. coli at the same concentration of Ag-alginate. The cell growth of S. aureus and E. coli was also influenced by the characteristics of counter ion of silver.

• Journal of the Korean Chemical Society
• /
• v.59 no.4
• /
• pp.271-279
• /
• 2015

The critical micelle concentration (CMC), the counter ion binding constant (B) and the aggregation number (N^* ) for the mixed micellization of sodium dodecanoate and sodium n-octanoate as two anionic surfactants have been investigated by means of electric conductivity and light scattering. As its experimental results are found to be deviated from ideal mixed model, thus two different kinds of regular solution models such as Rubingh and Motomura are used for interpreting our experimental data. The stability of the mixed micelles has been confirmed from the negative values of the standard Gibbs energy of mixed micellization ΔG^micel,0 over all compositions and the measured values of ΔG^micel,0 agreed with the theoretical ones within the experimental error.

• Journal of the Korean Applied Science and Technology
• /
• v.18 no.2
• /
• pp.111-117
• /
• 2001

Density, viscosity, conductance, dye solubility and carbon-13 nmr studies were performed in aqueous solution of three disodium 4-n-alkyl-3-sulfonatosuccinate anionic surfactant at $20^{\circ}C$. The cmc values were 0.14 mol/l for the disodium-4-n-octyl-3-sulfonatosuccinate($R_{8)S$), 0.041mol/l for the disodium-4-n-decyl-3-sulfonatosuccinate($R_{10}S$), and 0.018mol/l for the disodium-n-dodecyl-3-sulfonatosuccinate <$R_{12}S$). The aggregation numbers determined viscometrically and conductimetrically were 28 for $R_{8}S$, 48 for $R_{10}S$, and 67 for $R_{12}S$. The volume changes upon micellization were $8.9cm^{3}/mol$ for $R_{8}S$, $9.5cm^{3}/mol$ for $R_{10}S$, and $10.1cm^{3}/mol$ for $R_{12}S$. Binding constants for the dye pada to the micelles and the fractions of unbound counter-ion were also obtained. The two polar heads with their carbon linkage were likely in an aqueous environment in the $R_{8}S$ micelles with the micelles themselves being spherical.