• Magazine of the Korea Concrete Institute
• /
• v.7 no.6
• /
• pp.209-215
• /
• 1995

Corrosion of steel reinforcment is the most significant factor of deterioration in reinforced concrete structures. Chloride ion is considered one of the most common culprits in the corrosion of steel in concrete. It breaks down the passive film and allows the steel to corrode actively at a high rate. The main objective of this study is to determine the critical chloride ion concentrations in the pore solutions and chloride binding effect of cement pastes made with and without fly ash. Cement pastes with water-binder ratio of 0.5, allowed to hydrate in sealed containers for 28 days and to express pore solution. The expressed pore fluids were analyzed for chloride and hydroxyl ion concentrations. Evaporable water on paralled specimens was determined a.s the loss of weight per 100g of unhydreded cement when the specimens were heated to constant weight at 105'C. It was found that the replaced cement with fly ash has negligible influnce on the chloride binding and chloride binding capacity and rises the $Cl^-$ /$OH^-$ ratio in pore solution.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.1
• /
• pp.29-34
• /
• 2004

Biosorption technology is recognized as an economically feasible alternative for the removal and/or recovery of metal ions from industrial wastewater sources. However, the structure of biosorbents is quite complex when compared with synthetic ion-exchange resins, which makes it difficult to quantify the ion-binding sites. Accordingly, this report describes a well-defined method to characterize the pK values and numbers of biomass functional groups from potentiometric titration data. When the proposed method was applied to Sargassum polycystum biomass as a model biosorbent, it was found that the biomass contained three types of functional groups. In addition, the carboxyl group (pK=$3.7{\pm}0.09$) was found to be the major binding sites ($2.57{\pm}0.06 mmol/g$) for positively-charged heavy-metal ions.

• YAKHAK HOEJI
• /
• v.42 no.1
• /
• pp.46-52
• /
• 1998

Retroviral integrase is required for integration of viral DNA into the host cell chromosome. Human immunodeficiency virus type-1 integrase was partially purified as a part of a fusion protein linked to a maltose-binding protein and characterized in terms of an endonucleolytic activity. The concentration of the fusion protein purified through an amylose column was about 12mg/ml. Indicating that the solubility of the fusion protein is highly increased by the presence of a maltose-binding protein, considering that the integrase protein alone is poorly solubilized. The endonucleolytic activity of the fusion protein was detected at 0.1 to 1.OmM $Mn^{++}$ ion, but not at any concentrations tested of $Mn^{++}$ ion.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.438-442
• /
• 2012

To prepare calcium-binding peptides as calcium supplement, barley proteins were hydrolyzed using Flavourzyme for 18 h and the hydrolysates were ultra-filtered under 3 kDa as a molecular weight. The resultant filtered peptides were fractionated using ion exchange and normal-phase high performance liquid chromatography. Then each fraction that was obtained was determined for its calcium-binding activity to isolate the calcium-binding peptides. As a result, the highest calcium-binding peptide fraction was obtained, and the results suggest that barley protein hydrolysates can be used as a calcium supplement.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.615-619
• /
• 2010

A new coumarin-thiazolobenzo-crown ether based fluorogenic chemosensor BTC (1) was reported. The ion-selective binding properties of 1 with different alkali, alkaline earth metals and transitional metals were investigated in an ethanol-DMSO system. BTC (1) showed the highest binding constant toward $Hg^{2+}$ over $Ag^+$, $Pb^{2+}$ and $Cu^{2+}$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.88-94
• /
• 2013

The hexavalent chromium (Cr(VI)) is well known as a hazardous ion, presumably inducing dermatic diseases and if serious cancer. The present study concerns the binding capacity of Cr(VI) ions in the cement powder and matrix for a quantitative technique of Cr(VI) ions in cement to influence human health. Both the water-soluble and acid-soluble Cr(VI) ions present in 3 types of ordinary Portland cement (OPC), pulverised fuel ash (PFA), ground granulated blast furnace slag (GGBS), and silica fume (SF) were measured using the spectrophotometer. As a result, it was found that the concentration of water-soluble Cr(VI) ion in cement ranged from 10.5 to 18.9mg/kg-cement, and in the additional materials a very low value of Cr(VI) ion was measured. Acid-soluble Cr(VI) ion was even higher than water-soluble Cr(VI) ion, ranging from 172.4 to 318.2mg/kg-cement. Nevertheless, the concentration of acid-soluble Cr(VI) ion is not proportional to addition of acid. It depends rather the variable pH of solvent involving cement paste. As enough cement hydration occurs, the binding capacity of Cr(VI) ion increases, inhibiting this ions from leaching out in the presence of hydration products such as ettringite or tri-calcium aluminate which bind Cr(VI) ion by ion-exchange.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.791-795
• /
• 2004

The binding of cethyl trimethylammonium bromide, (CTAB) with human serum albumin (HSA) has been investigated at 5 mM phosphate buffer pH 7.0, 27 $^{\circ}C$ and various ionic strength using ion selective membrane electrodes. This method is faster and much more accurate than equilibrium dialysis technique, so provides sufficient and accurate data for binding data analysis. A novel and simple method was introduced for resolution and characterization of binding sets on basis of binding capacity concept. The values of Hill binding parameters were estimated for each set and used for calculation of intrinsic binding affinity. The results interpreted on basis of nature of forces which interfered in the interaction and represent the existence of three and two binding sets for binding of CTAB at $10^{-4}$ and $10^{-3}$ M of NaBr, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.267-271
• /
• 1998

In order to investigate the physical properties of alginate extracted from sea tangle, Laminaria app., under various conditions, viscosity and binding capacity of metal ion (BCMI) of alginate were measured. The higher concentrations of sodium carbonate and the longer extracting time became, the lower apparent viscosity and BCMI were. BCMI in alginate reached maximum at the concentration of 0.06M metal ion. The BCMI of $Pb^{++}$ ion was the highest but $Cu^{++}$ ion was the lowest in the five metal ions. BCMI was increased in proportion as increase of viscosity in alginate.

• BMB Reports
• /
• v.31 no.1
• /
• pp.25-30
• /
• 1998

Kinetic studies of L-Alanine dehydrogenase from Bacillus subtilis-catalyzed reactions in the presence of $Zn^{2+}$ were carried out. The substrate (L-alanine) saturation curve is hyperbolic in the absence of the metal ion but it becomes sigmoidal when $Zn^{2+}$ is added to the reaction mixture indicating the positive cooperative binding of the substrate in the presence of zinc ion. The cooperativity of substrate binding depends on the xinc ion concentration: the Hill coefficients ($n_H$) varied from 1.0 to 1.95 when the zinc ion concentration varied from 0 to $60\;{\mu}m$. The inhibition of AlaDH by $Zn^{2+}$ is reversible and noncompetitive with respect to $NAD^+$ ($K_i\;=\;5.28{\times}10^{-5}\;M$). $Zn^{2+}$ itself binds to AlaDH with positive cooperativity and the cooperativity is independent of substrate concentration. The Hill coefficients of substrate biding in the presence of $Zn^{2+}$ are not affected by the enzyme concentration indicating that $Zn^{2+}$ binding does not change the polymerization-depolymerization equilibria of the enzyme. Among other metal ions, $Zn^{2+}$ appears to be a specific reversible inhibitor inducing conformational change through the intersubunit interaction. These results indicate that $Zn^{2+}$ is an allosteric competitive inhibitor and substrate being a non-cooperative per se, excludes the $Zn^{2+}$ from its binding site and thus exhibits positive cooperativity. The allosteric mechanism of AlaDh from Bacillus subtilis is consistent with both MWC and Koshland's allosteric model.

• YAKHAK HOEJI
• /
• v.18 no.2
• /
• pp.133-144
• /
• 1974

The metal indicator, acidic azo dyes NN, EBT and Calcon are utilized to analyse quantitatively chlorpheniramine, tripelenamine and diphenhydramine forming insoluble ion pair in aqueous solution at proper pH values between the acidic azo dyes and the sample molecules, these compexes are extracted by organic polar solvents, and organic layer is determined spectrophotometrically. Generally, the absorption maxima of the complexes are shifted to longer wavelengths compare to the absorption maxima of the dyes themselves. The binding ratio of the ion pair forming complex molecules in chloroform soln, are as follows ; NN-antihistamines (chlorpheniramine, tripelennamine, diphenhydramine) are NN-1 to antihisamine-1, EBT-antihistamines are EBT-2 to antithistamines a and Calcon-antihistamines are Calcon-3 to antithistamines-1. These coomplexes in chloroform soln. are very stable, and show higher absorbance than the other organic polar solvents. The binding state of complexes were presumed intermolecular hydrogen bond by their infrared spectra. In the mixture solution of three samples, the aqueous phase is buffered at pH 1.0, and benzene is used to extract ion pair of diphenhydramine EBT complex selectively. At pH 1.0 of aqueous layer, Calon-diphenhydramine complex is also extracted selectively by benzene. However, in this case very small amount of chlorpheniramine-calcon calcon simultaneously. The binding state of diphenhydramine-EBT and diphenhydramine-calcon in benzene are smae as the complexes in chloroform. But the absorption maxima of the complexes in benzene are shifted to shorter wavelenlgths than the complexes in chloroform.