• Proceedings of the KWS Conference
• /
• 2006.10a
• /
• pp.136-138
• /
• 2006

Recently a lots of problems have observed in high densified and high integrated electronic components. One of them is ion migration phenomena, which induce the electrical short of electrical circuit. Ion migration phenomena has been observed in the field of exposing the specific environment and using for a long time. Also as the RoHS restriction was started in July 1st, 2006, Pb-free solder was utilized in electronics assemblies. In this case, it is very important to compatible between components and printed circuit board(PCB), thus surface treatment materials of PCB was changed to Sn, Sn-3.0Ag-0.5Cu, Cu. Therefore these new application become to need to reevaluate the sensitivity about electrochemical ion migration. This study was evaluated the occurrence time of electrochemical ion migration using by water drop test. We utilized PCB(printed circuit board) having a comb pattern as follows 0.1, 0.318, 0.5, 1.0 mm pattern distance. Sn-3.0Ag-0.5Cu and Sn-37Pb were electroplated on the comb pattern. 6.5V and 15.0V were applied in the comb pattern and then we measured the electrical short time causing by occurring the ion migration. In these results, we evaluate the sensitivity and derived the prediction models of ion migration occurrence time depending on the pattern materials, applied voltage and pattern spacing of PCB conductor.

• Journal of Applied Reliability
• /
• v.16 no.3
• /
• pp.202-207
• /
• 2016

Purpose: The purpose of this study is main factors (environmental conditions, pattern spacing, pattern material) that effect the ion-migration of PCB. Methods: Recently, the electronic components are becoming more high density of electronic device, so that electronic circuits have smaller pitches between the patten and more vulnerable to insulation failure. so the reliability of electric insulation of device has become an ever important issue as device contact pitches of pattern. Usually, ion-migration occurs in high temperature and high humidity environment as voltage is applied to the circuit. Under high temperature and high humidity, voltage applied electronic components respond to applied voltages by metals's electrochemical ionization and a conducting filament forms between the anode and cathode across a nonmetallic medium. This leads to short-circuit failure of the electronic component. Results: we studied ion-migration that occurs in accordance with the main factors (environmental conditions, pitches, pattern material). The PCB pattern material was made by two different types of material (free solder, OSP) for this research and pitches of pattern is 0.15mm, 0.3mm, 0.5mm. PCB was experimented in the environmental conditions (high temperature $120^{\circ}C$, high temperature and high humidity $85^{\circ}C$, 85%RH) and was analyzed for ion-migration through the experiment results. Conclusion: We confirmed that environmental condition, pitches of pattern, pattern material had effect on ion-migration of PCB.

• Korean Journal of Pharmacognosy
• /
• v.9 no.4
• /
• pp.169-171
• /
• 1978

Methanolic extracts of fresh ginseng, white ginseng and red ginseng were found to have a biological antioxidant activity against ethanol induced lipid peroxidation in the mouse liver. This antioxidant activities were repressed by the addition of ferric ion to the Korean ginseng in the process of its extraction.

• Journal of Korean Society on Water Environment
• /
• v.23 no.2
• /
• pp.222-227
• /
• 2007

The adsorption features of fluoride ion on the oyster shell have been investigated for the purpose of the employment of waste oyster shell as an adsorbent for the treatment of fluoride ion-containing wastewater. The major component of oyster shell was examined to be Ca with minor components of Na, Si, Mg, Al, and Fe. As the initial concentration of fluoride ion was raised, its absorbed amount was enhanced at equilibrium, however, the adsorption ratio of fluoride ion compared with its initial concentration was shown to be decreased. Also, adsorption of fluoride ion onto the oyster shell resulted in the formation of $CaF_2$ in the morphological structure of adsorbent. Kinetic analysis showed that the adsorption reaction of fluoride ion generally followed a second order reaction with decreasing rate constant with the initial concentration of adsorbate. Freundlich model agreed well with the adsorption behavior of fluoride ion at equilibrium and the adsorption reaction of fluoride ion was examined to be endothermic. Several thermodynamic parameters for the adsorption reaction were calculated based on thermodynamic equations and the activation energy for the adsorption of fluoride ion onto oyster shell was estimated to be ca. 13.589 kJ/mole.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.70-77
• /
• 2024

A low energy ion irradiation system based on the deuterium arc ion source with a high perveance of 1 µP for a single extraction aperture has been successfully developed for the investigation of ion irradiation on plasma-facing components including the first mirror of plasma optical diagnostics system. Under the optimum operating condition for mirror testing, the ion source has a beam energy of 200 eV and a current density of 3.7 mA/cm². The ion source comprises a magnetic cusp-type plasma source, an extraction system, a target system with a Faraday cup, and a power supply control system to ensure stable long time operation. Operation parameters of plasma source such as pressure, filament current, and arc power with D₂ discharge gas were optimized for beam extraction by measuring plasma parameters with a Langmuir probe. The diode electrode extraction system was designed by IGUN simulation to optimize for 1 µP perveance. It was successfully demonstrated that the ion beam current of ~4 mA can be extracted through the 10 mm aperture from the developed ion source. The target system with the Faraday cup is also developed to measure the beam current. With the assistance of the power control system, ion beams are extracted while maintaining a consistent arc power for more than 10 min of continuous operation.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.5
• /
• pp.479-490
• /
• 1998

The concentrations of ten inorganic (sodium, chloride, sulfate, ammonia, etc.) and three organic (acetate, formate, and MSA) ions associated with airborne particulate matter were measured from Cheju Island, Korea during the three field intensive campaigns conducted in (1) Sept./oct. 1997 (fall), (2) Dec. 1997 (winter), and (3) April 1998 (spring). The results of our measurements indicated that the concentration levels of most ionic species were decreasing significantly across the three experimental periods. The patterns of concentration reduction were clear as the sum of all cation and anion species changed dramatically across those periods such as 294> 144 > 65 and 193 >96>74 nequiv/m3, respectively. The changes were best explained in terms of the wind rose patterns of the study site. Since our sampling spot is located on the western-end point of Cheju Island, it is likely to reflect the effects of diverse sources such as natural, marine processes during NW and local non-maritime ones during SE winds. .Hence, the periodical changes in ionic concentrations may be accounted for by the comparable changes in wind direction. To further investigate environmental characteristics of these ionic components, correlation analysis was conducted not only between meteorological and ion data but between different ion-pairs. The results of these analyses confirm that the concentration levels of ionic species are strongly affected by wind speed and temperature and that there are certain patterns between ion species to which such effects apply. In light of the significance of the wind rose patterns in the area, we further extended these analyses into four data groups that were divided on the basis of wind direction. The results of these analyses showed that the strength of correlations between important pairs (e.g.:. between windspeed and most of major inorganic species including sodium and chloride) can be ranked on the distribution of major ions are very diverse, depending on data grouping scheme for such analysis. The results of this study thus suggest that environmental behavior of chemical components be analyzed in various respects, rather than simple standard, especially if measurements are made in complex environmental condition under which both natural and anthropogenic effects are competing each other.

• Journal of Environmental Science International
• /
• v.5 no.2
• /
• pp.141-152
• /
• 1996

This study is an attempt to investigate the chemical components of precipitation and its variation according to surface wind. Precipitation samples were collected by an wet-only precipitation sampler during the period of October 1994 to September 1995 at Kyungsan in Korea. The results obtained in t체s study are summerized as follows. The annual average of precipitation pH is 5.0, the highest month of pH is July of 5.5, and the lowest month of pH is December of 4.4. The most frequent appearance is in the range of pH 5.0 to 5.5 and its rate is 56.8%, The order of ion concentration In precipitation is SO42->NO3->Cl- in case of anion and $Ca^{2+}$>$NH_4^{+}$>$Na^+$>$Mg^{2+}$ in case of cation. It is found from our analysis that the correlation coefficient among the precipitation pH and ion components is below r=0.3, while the correlation coefficient between $SO_4^{2-}$ and NO_3^{-}$, $Na^+$ and $Cl^+$ is above r=0.8, respectively. The mean pH of precipitation is 4.8 under the westerly wind and 5.2 under the easterly wind. The concentrations of anion and cation under the westerly wind are more than the concentrations under the easterly wind. In autumn, the concentration of Na+ and $Cl^+$ under the easterly wind are higher than the concentration under the westerly wind. The correlation coefficients between wind speed and pH, ion components show very low correlation of -0.41 r 0.2. But the present study show that the correlation coefficient between wind speed and pH of precipitation is positive and the correlation coefficients between wind speed and ion concentration is negative.

• Membrane and Water Treatment
• /
• v.8 no.4
• /
• pp.381-393
• /
• 2017

The inorganic components in tobacco sheet extract have significant influence on the sensory taste of the cigars and the harmful component delivery in cigarette smoke. To identify the contributions of the divalent inorganic components on harmful components delivery in cigarette smoke, a self-made selective electrodialysis was assembled with monovalent ion-selective ion exchange membranes. The influences of current density and extract content on the desalination performance were investigated. Result indicates that the majorities chloride, nitrate, and sulfate ions were removed, comparing with 50-60% of potassium and only less than 10% of magnesium and calcium ions removed in the investigated current density. The permselectivity of the tested cations across the Selemion CSO cation exchange membranes follows the order: $K^+>Ca^{2+}>Mg^{2+}$. A current density of $15mA/cm^2$ is an optional choice by considering both the energy consumption and separation efficiency. When the extract contents are in the range of 7%-20%, the removal ratios the potassium ions are kept around 60%, while the removal ratios of the calcium and magnesium ions fluctuate in the range of 16-27% and 8-14%, respectively. The tobacco smoke experiments indicated that the divalent metal ions have dual roles for the harmful component delivery in cigarette smoke. The divalent potassium and calcium ions were unfavorable for the total particulate matter emission but beneficial to decrease the HCN delivery in the mainstream cigarette smoke. The selective electrodialysis is a robust technology to decrease the harmful component delivery in cigarette smoke.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.2
• /
• pp.123-128
• /
• 2004

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.461-472
• /
• 1997

This study was carried out to investigate the characteristics of chemical components and precipitation at Kimhae area from March, 1992 to June, 1994. The pH values, concentration of soluble ions($Cl^-$, $NO_2^-}$ $NO_3^-}$, $NO_4^{2-}$-, $PO_4^{3-}$. $F^-$, $Mg^{2+}$, $Ca^{2+}$, $Mn^{2+}$, $K^+) and non-soluble metals(Cr.Si. Zn, Pb, Cu, Fe, Mn, Mg, Ad. V. Cal were measured by pH meter, IC (ion Chromatography) and ICP(Inductively Coupled Plasma). The data were analyzed by the dally. hourly distribution characteristics of acidity and chemical components, as well as the correlation between them. The results are as follows. 1. The pH range of precipitation was from 3.45 to 6.80 in Kimhae area. and average value was pH 4.62 and main chemical components were $SO_4^{2-}$, $Cl^-$, $NO_3^-$. The highest pH value and concentration appeared in initial rain, which might result from urbanlzation and industrialization in this area and long term transportation from China. 2. The hourly correction distribution of main anions related to pH value In the rainwater showed $SO_4^{2-}$ > $NO_3^-$ > $Cl^-$. Hourly concentration of heavy metal and each ion was highly correlated with pH in the precipitation.