• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.3
• /
• pp.23-33
• /
• 2016

The characteristics of ammonia generated from alkaline stabilization facilities was investigated which are for organic sewage sludge from wastewater treatment plants. The highest concentration of ammonia was found in mixing and curing process in alkaline stabilization facility and ammonia mainly showed a range of 87.78 ppm($66.62mg/m^3$) to 1,933 ppm($1,467.01mg/m^3$) by detection tube. This is presumed to occur because nitrogen oxides are converted into ammonia as the sewage sludge is mixed with lime. In some facilities, hydrogen sulfide and methyl mercaptan were detected in relatively high concentrations, but odor materials except ammonia were not detected in most of the facilities. The concentration of ammonia caused by process was generally high in the order of "mixing > curing > output > storage > drying > input." It was found that odor compounds are removed by wet absorption using sulfuric acid and sodium hypochlorite in the 5 alkaline stabilization facilities currently in operation. Each facility was designed to meet the concentration of after-treatment emission in 1 ppm($0.76mg/m^3$), 50 ppm($37.95mg/m^3$) or 100 ppm($75.89mg/m^3$), but no facility satisfied the design standard for their emssion limit. In case of ammonia, some workplaces in alkaline stabilization facilities exceeded the exposure limits established by the Ministry of Labor. It appears that proper ventilation should be provided for the safety of workers in future. No odor compound including ammonia was found by detection tubes in the border of the facilities, but trace amounts of odor compounds are expected to exist, given the current operational status of facilities.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.345-358
• /
• 2018

In this study, we have performed electron probe micro analyzer (EPMA), X-ray differaction (XRD), inductively coupled plasma spectroscopy (ICP), Fourier transform Raman spectroscopy (FT-Raman), far-infrared (FIR), nuclear magnetic resonance (NMR), and pH-DO Analyses for characterizing medicinal mineralogy aspect of the black tourmaline (Shantung, china), black and pink tourmaline (Minas Geraris, Brazil), black touemaline (Daeyu mine, Korea). In addition, heating effects of the tourmaline sauna as well as the effects of tourmaline powder-added soap on skin troubles have been investigated. It has been revealed that chemical composition of the tourmaline is either high in Fe-, Al-, B-rich types. Ratio of the K-Ca, Na-K, and Fe-B reflects the component change property of solid solution. $CaO/CaO+Na_2O$ and MgO/FeO+MgO ratio show high positive correlation. When tourmaline reacts with distilled water, extended reaction time DO values approximately decrease and it stabilizes at DO = 10. Otherwise, pH values increase until 6 hours and it stabilizes at pH = 8 after 24 hours. Distilled water changes to alkaline when it reacts with tourmaline powder and particles. Tourmaline showed lower absorption spectrum strength and transmittance at short wave, where absorption spectrum wavelength and strength were determined by the content of the composition elements and characteristics of crystallography. Increase of the Fe content has been confirmed to be the cause for the reduction of irradiation. For the chemical composition and spectral property of the tourmaline particle samples, it has been found that Si and Fe contents show positive correlation with Far-Infrared irradiation, while Al and Mg contents show negative correlation. For tourmaline powder, it has been confirmed that $^{17}O-NMR$ FWHM (full width at half maximum) decreases when reacts with distilled water. Tourmaline sauna (approximately $100^{\circ}C$) was found to increase $0.5-1.5^{\circ}C$ of body temperature, average of 12 heartbeat, and 10mg Hg of blood pressure. Tourmaline soap had very good aesthetic effect to skin and was confirmed to have above the average improvements to skin troubles (e.g., allergy or atopy).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.1
• /
• pp.7-14
• /
• 1989

This experiment was carried out to determine the seasonal herbage production and utilization during the growing season of pasture on the forest (shading 30%). Plant height, leaf area index(LAl), dry matter(DM) production and distribution, chemical composition, in vitro dry matter digestibility(IVDMD), herbage utilization percentage and chewing efficiency were investigated using the Corridale sheep. Experimental field was treated by one plot design(3 rep.) and performed from 1987 to 1988 at Chungnam National University, Daejon. The results obtained are summarized as follows: 1. The highest plant height and LA1 were observed in May(35.0 cm, 4.89), followed by April(28.0 cm, 4.23), while the plant height and LA1 in October (13.0 cm, 0.49) showed very low. 2. During the growing season, about 58.3 % of annual DM production (7240 kg/ha) was produced during the spring (April, May and June) and the highest DM production was obtained in May (2040 kg/ha), which was more than 28.2 % of total DM production. However, DM production in July and August was about 24.2 % and those in September and October (17.5 %) was very low, but the difference of DM production from June to September was small. 3. The maximum DM production per day (65.8 kg/ha) was observed in May, followed by June (28.7 kglha), while DM production per day in October (16.5 kg/ha) showed very low (p <0.01). 4. Crude protein content and IVDMD of herbage samples during the spring (April, May and June) were higher, while crude fiber, ADF, and NDF content were lower in an summer growth herbage samples (July and August), but autumn growth herbage samples was intermediate. Crude ash content and IVDMD of collected herbage samples were slightly more, while crude fiber, ADF and NDF content were slightly less than offered and residued herbage samples during the growing season. 5. The maximum DM intake per metabolic body size was observed in May(68.9 g), followed by October (66.7 g), while very low in August (52.5 g). Significant positive correlation (p <0.05) was found between DM intake and IVDMD. 6. Herbage utilization percentage was very high in April (83.4 %), while very low in August (64.0 %). The percentage of annual herbage utilization was about 75.5 %. 7. The maximum ruminating and chewing efficiency of herbage samples were observed in May, followed by October, while very low in August.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.103-109
• /
• 2005

Isolation and primary culture technique of rabbit oral keratinocytes, and the study for effect of environmental factors on the cell growth were carried out in T75-flask. $1.92{\pm}0.59{\times}10^6$ viable cells were isolated by trypsin enzymatic digestion method from $0.25cm^2$ biopsy of rabbit oral mucosa. Primary culture with 10 mL of K-SFM containing 50 mg/L BPE, $5.0{\mu}g/L$ EGF and 0.15 mM $Ca^{2+}$ showed confluence after 8 days and doubling time was 2.54 days. Effect of medium types, medium volume and supplement types on the cell growth was investigated after the cultured keratinocytes had been harvested from primary confluence. Serum addition showed adverse effect and the increase of serum concentration didn't have an effect on the cell growth. The increase of medium volume decreased the cell growth. The increase of calcium concentration increased the cell growth and 2.0 mM was optimum value. In conclusion, when rabbit oral keratinocytes was cultured in T75-flask, the most effective conditions was to use 10 mL of K-SFM containing 50 mg/L BPE, $5.0{\mu}g/L$ EGF and 2.0 mM $Ca^{2+}$, and doubling time was 1.32 days. This study can provide the useful informations to develop a process and design a bioreactor for the culture of keratinocytes in human body like skin and cornea, as well as mucosa.

• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.56-68
• /
• 2009

Ongoing and extensive urbanisation, which is frequently accompanied with careless construction works, may threaten important archaeological structures that are still buried in the urban areas. Ground Penetrating Radar (GPR) and Electrical Resistivity Tomography (ERT) methods are most promising alternatives for resolving buried archaeological structures in urban territories. In this work, three case studies are presented, each of which involves an integrated geophysical survey employing the surface three-dimensional (3D) ERT and GPR techniques, in order to archaeologically characterise the investigated areas. The test field sites are located at the historical centres of two of the most populated cities of the island of Crete, in Greece. The ERT and GPR data were collected along a dense network of parallel profiles. The subsurface resistivity structure was reconstructed by processing the apparent resistivity data with a 3D inversion algorithm. The GPR sections were processed with a systematic way, applying specific filters to the data in order to enhance their information content. Finally, horizontal depth slices representing the 3D variation of the physical properties were created. The GPR and ERT images significantly contributed in reconstructing the complex subsurface properties in these urban areas. Strong GPR reflections and highresistivity anomalies were correlated with possible archaeological structures. Subsequent excavations in specific places at both sites verified the geophysical results. The specific case studies demonstrated the applicability of ERT and GPR techniques during the design and construction stages of urban infrastructure works, indicating areas of archaeological significance and guiding archaeological excavations before construction work.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.145-155
• /
• 1980

An engineering design of the machines and equipment for processing grain as well as an understanding of processing itself need the knowledge of thermal properties of grain. Thermal properties of grain are thermal conductivity, thermal diffusivity and specific heat. Knowledge of any two and the bulk density of grain enables the third to be calculated. Several workers have investigated these properties, with special emphasis on thermal conductivity and diffusivity. However, some information is available on the specific heat of rough rice and barley but it is available only for a foreign variety of grain and for as a function of moisture content only. The objectives of this study were to develop a model for the specific heat of rough rice and barley which were a staple products in Korea as a function of initial temperature, moisture content and porosity of grain with cooling curve method, and to analyze the effect of these factors on the specific heat of rough rice and barley. The results of this study are summarized as follows; 1. The specific heat was $1.8209-2.7041kJ/kg\;^{\circ}K$ for Naked barley, 1.8862-2.5625 k.l/kg K for Covered barley, $1.5167-2.3779kJ/kg\;^{\circ}K$ for Japonica rice and $1.5260-2.3981kJ/kg\;^{\circ}K$ for Indica rice. 2. The model for the specific heat of rough rice and barley as a function of initial temperature, moisture content and porosity of grain was developed. 3. Specific heat of rough rice was decreased with initial temperature, but specific heat of barley was increased with initial temperature. 4. On the whole specific heat of sample grain was increased with moisture content of grain. 5. Specific heat of the grain was found to decrease with porosity except Indica rice.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.2
• /
• pp.141-150
• /
• 2015

Purpose: In the present study, a difference in tear volume between the cornea and the rigid gas permeable (RGP) lens relative to corneal shape and corneal astigmatism was investigated by the alignment fitting status of spherical and aspherical RGP lenses. Methods: Spherical and aspherical RGP lenses were fitted with alignment in 77 subjects (135 eyes) who were in their 20~30s. Tear volume stained with fluorescein was qualitatively analyzed by dividing cornea into center, mid-peripheral and peripheral parts. Results: For the spherical RGP lens fitting, tear volume differences were found in each part in all corneal types. For the aspherical RGP lens fitting, tear volume differences were in each corneal part in symmetric bow tie- and asymmetric bow tie-type corneas. However, the tear was equally distributed from the center to the peripheral part in round- and oval-type corneas. In the group with corneal astigmatism lower than 1.25 D, tear volume between center and peripheral parts, and mid-peripheral and peripheral parts, was different when a spherical RGP lens was fitted. However, tear volume in each part was not different in the group with corneal astigmatism over 1.50 D. Moreover, the tear volumes of the central and mid-peripheral parts were proportionally increased with increasing corneal astigmatism in both spherical and aspherical RGP lenses. Furthermore, aspherical RGP lenses showed greater increments than spherical RGP lenses. Conclusions: The results revealed that the difference in tear volume between aspherical RGP lens and cornea was less than spherical RGP lens, and the difference in tear volume varied according to corneal shape and astigmatism. In addition, the method of measuring relative tear volume between RGP lens and cornea that was established in the present study can be used to evaluate tear volume between contact lens and cornea.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.1-9
• /
• 2004

Purpose : The aim of this study is to investigate the properties of small field size and to measure the penumbra and central axis depth dose varying to the jaw setting and off axis distance for indicate this data to small field sizes radiation therapy. Material and methods : The percentage depth dose, beam profile and central axis output dose was measured by farmer type ion chamber and pinpoint chamber using Primart linac with 6MV energy. Beam quality and penumbra variations according to the central axis shift, from center to every 2cm outside increment, and field size, from $1{\times}1cm$ to $10{\times}10cm$ was investigated and compared with that of the standard geometrical condition's results Results : The differences of measured values between two ion chamber was about $37\%$ at 10cm depth with $1{\times}1cm$ field sizes but as field size increased this differences was diminished gradually. Measured data from various off axis distance with the different asymmetric collimations are not changed significantly but as size decreased the dose variation was increased and at $1{\times}1cm$ field size dose difference among off axis distance was as much as $13\%$, and as shallower the measured depth the central axis dose variations among the OAD was increased, penumbra was not changed noticeably depending on off axis distance but the percentage of penumbra from its initial field sizes was strongly dependant on field sizes and penumbra occupation rates of its own field sizes ranging from $6\%$ at $10{\times}10cm$ to $50\%$ at $1{\times}1cm$ field size. Conclusion : For imrt treatment, there are several numbers of different gentry angles with beams of nonuniform fluences are required and several complex factors involved. Among them the characteristics of beam output varying to the geometrical setting and design of collimators are of important to attaining a good treatment results. As mentioned in results the differences of measured values are changed significantly depends on ion chamber volume, depths and field size. For providing quality radiation treatment, especially at small field size, those factor's should have considering deliberately.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.3 s.41
• /
• pp.133-148
• /
• 2006

The purpose of this study was to acquire the better and more correct information on the school uniforms with which middle or high school students may be satisfied. We investigated clothing interest, school uniform satisfaction, school uniform modification behavior and the relationship anions those factors. The data were collected from 472 questionnaires of middle and high school students who lived in Gyeonggi-do and analyzed statistically. We found that adolescents felt a great interest in appearance, fashion, brand orientation of clothing, and they spent most of personal expenses in buying clothes. However, the extent of adolescents' satisfaction on school uniform was low. Especially, the satisfaction on status symbolism, fashion, washing & management, body comfort and economical efficiency of school uniform was found low. Three hundred fifty three students (74.8%) agreed to modify the school uniform for personality and in chase of fashion. Two hundred eighty four students (58.1%) needed partially and variously modified school uniform, and these modifications showed a tendency of tightness to the body. We also found that the higher adolescents' clothing interests in appearance, conformity, modesty and brand orientation were. the more satisfied adolescents were with the status symbolism and the washing & management of school uniform and the more affected the school uniform modification behaviors of students were. There were. however. no significant difference between the extent of school uniform satisfaction and the school uniform modification behavior, Another research of school uniform will be necessary in order to reduce the discrepancy between clothing needs for representing the appearance, personality and fashion in the present adolescents and those for representing the worthy and modest images of a student and pursuing the economic value through school uniform in the older generation. We suggest that students should consider these results when they choose school uniform and furthermore both the person in charge of schools and school uniform makers should refer to those when they design and make school uniform.

• Korean journal of applied entomology
• /
• v.46 no.2
• /
• pp.193-199
• /
• 2007

This study was conducted to explain degree of injury caused by P. panopealis larva which is the key component to develop economic injury level or control threshold in green perilla and was carried out in polyvinyl houses at Yuseong Daejeon, Geumsan and Yesan Chungnam from 2004 to 2006. Of 5 major pests in green perilla polyvinyl house, P. panopealis larva injured green perilla leaf by 48.5% on average under no insecticides application. The peak occurrence of P. panopealis adult was early August and late September in 2004 and 2005 studies. The feeding amount of P. panopealis larva among 1st to 3rd instar was not different, but from the 4th instar the feeding amount greatly increased and this result was consistent with daily feeding experiment in which the amount greatly increased from seventh day. The degree of injury which was investigated with different larval infestation levels showed that the degree of injury increased a little but was not dim ε rent significantly as the density increased. The density of P. panopealis larva in damaged green perilla plant was less than three individuals/plant. This result indicates that P. panopealis adult lays egg on green perilla leaf dispersedly and larva hatched from egg injures only the leaf which egg is layed. These preliminary data seems to be very useful to design economic injury level and control threshold studies for P. panopealis in green perilla polyvinyl house.