• 전기학회논문지P
• /
• 제63권4호
• /
• pp.333-338
• /
• 2014

This paper concerns the development of the transformer that can reduce harmonics supplied to the system if the output of photovoltaic inverter in the photovoltaic system is grid-connected, and suggests that problems of harmonics and power factor degradation in the grid-connected photovoltaic system can be improved. In this study, the burden of increasing the investment in new facilities and securing their installation space due to harmonics has been substantially eased through the development of a hybrid transformer possessing unbalanced function and harmonics reduction function using zig-zag coils, and most of all, it is expected that the development of such high efficiency hybrid transformer possessing functions of transformation and reducing harmonics can improve the power quality as well as prevent damages caused by harmonics, leading to suppress unnecessary loss of electric power and thereby contribute to energy savings.

• 전력전자학회논문지
• /
• 제16권5호
• /
• pp.484-493
• /
• 2011

본 논문은 뉴로-퍼지 제어기를 이용한 최적의 퍼지 소속함수에 동조하는 다층 신경회로망을 사용한 성능이 개선된 MPPT 알고리즘을 제안한다. 퍼지 제어기의 성능은 퍼지규칙과 퍼지 소속함수의 폭의 영향을 받는다. 뉴로-퍼지 제어기는 신경망 학습을 통해 퍼지 소속함수의 최적 폭을 이용하기 때문에 기존 퍼지 제어기보다 우수한 응답특성을 갖는다. 실험과 시뮬레이션 결과를 통해 제안된 알고리즘의 우수한 제어특성을 확인한다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권5호
• /
• pp.193-200
• /
• 2004

In this study, we propose a small high voltage power supply, which uses a half-bridge ZCS resonant and Cockroft-Walton circuit as its ESP (Electrostatic Precipitator). This power supply transfers energy from the ZCS resonant inverter to the step-up transformer. The transformer secondary is then applied to the Cockroft-Walton circuit for generating high voltage as a discharging source of electrodes. It is highly efficient because its amount of switching losses are reduced by virtue of the current resonant half-bridge inverter, and also due to the small size, low parasitic capacitance in the transformer stage owing to the low number of winding turns of the step up transformer secondary combined with the Cockroft-Walton circuit. Using this power supply, experiments have been carried out as a function of the switching frequency and duty ratio in order to investigate the smoke removal characteristics. From these results, the best operational condition is obtained at the switching frequency of 9 kHz and the duty ratio of 50% in this ESP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.386-389
• /
• 2006

BIPV(Building Integrated PV) system can expect dual effects that reduce expenses for establishment of PV system by adding new function as outer covering material of building expect producing the electricity. In case of PV(photovoltaic system) there are many generation differences according to the exterior environmental facts(solar cell array, design and installation condition of interactive inverter system). In this paper, we compared constitute factors of 3kW BIPV(solar cell module, inverter), operating characteristic and total system characteristic(utilization, generation efficiency, loss fact) and found out long time operating data using a watch instrumentations. By use of long time operating result, compare a totally operating characteristics, and we proposed a next building application of BIPV. BIPV system that is proposed in this paper, was established in Solar Energy research center of Chosun University, composed with system. The objective of this paper, is to provide a efficient BIPV design method through the considerations for the integration of PV system.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1369-1379
• /
• 2018

In this paper, a model predictive torque control (MPTC) without the use of a weighting factor for surface mounted permanent-magnet synchronous machine (SPMSM) drive systems is presented. Firstly, the desired voltage vector is predicted in real time according to the principles of deadbeat torque and flux control. Then the sector of this desired voltage vector is determined. The complete enumeration for testing all of the feasible voltage vectors is avoided by testing only the candidate vectors contained in the sector. This means that only two voltage vectors in the sector need to be tested for selecting the optimal voltage vector in each control period. Thus, the calculation time can be reduced when compared with the conventional enumeration method. On the other hand, a novel cost function that only includes the dq-axis voltage errors between the desired voltage and candidate voltage is designed to eliminate the weighting factor used in the conventional MPTC. Thus, the control complexity caused by the tuning of the weighting factor is effectively decreased when compared with the conventional MPTC. Simulation and experimental investigation have been carried out to verify the proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1519-1528
• /
• 2017

The paper proposes a well structured, component count waned single phase multilevel inverter (MLI) topology, which drives three different modules viz. Stipulation Based Sources Insertion (SBSI) module, Level Count Increasing (LCI) module and Inter-Linking H-Bridge (ILHB) module. The SBSI module confronts the number of basic sources needed in series/parallel to achieve required magnitude for any particular level. The LCI possesses an offsetting dc source and opuses to increase the number of levels and the ILHB module links the SBSI and LCI modules. A developed Hybrid Pulse Width Modulation (HPWM) strategy has PWM pulses for the switches of LCI module while the switches of the remaining two modules function at fundamental switching frequency. A fifteen level version of the proposed stipulation based sources insertion MLI (SBSIMLI) topology is simulated in MATLAB R2010a and a prototype of the similar specifications is constructed to validate the performance by experimental results. The comparison between the developed SBSIMLI topology and the competent topologies shows many interesting facts.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 추계학술논문집 2부
• /
• pp.604-606
• /
• 2011

Purpose This study analyzes resistance spot weldability of DP60 steels. Methodology To compare the resistance spot weldability of DP60 steels, tensile strength test and macro-section test were conducted for the resistance spot welds. Acceptable welding conditions were determined as a function of the resistance spot welding process parameters such as electrode force, welding time, and welding current. The lower limit of the welding lobe was the minimum shear tension strength for 590MPa-grade steel while the upper limit was determined whether or not expulsion was detected. Findings Welding force is 200kgf more appropriate in terms of 300kgf the larger the width of the welding zone. Acceptable welding current condition and welding lobe were changed depending on welding force. Research limitations This study is forced on inverter DC resistance spot weldability of 590Mpa-grade steels for automotive application. Practical implications This study confirms the weldability of DP60 steel by comparing resistance spot weldability depending on welding force. Originality This study analysed resistance spot weldability depending on welding force. wedability of DP60 steel were determined by welding lobes.

• 전력전자학회논문지
• /
• 제7권4호
• /
• pp.339-345
• /
• 2002

본 논문에서는 입력 전압 DC 24 [V]로 출력 전압 AC 220 [V] 정현파 출력을 낼 수 있는 인버터 기능과 충전 전압 및 충전 전류를 조정할 수 있는 DC 24 [V]용 자동 충전기 기능을 동시에 가지는 전원 장치의 시작품을 제작하고 실험을 통해서 타당성을 검증하였다. 본 논문에서 제안하는 전원장치는 두 기능을 동시에 가지면서도 전력 수수의 라인을 하나의 라인으로 회로 구성을 실현하여 스위치 소자 및 고주파 트랜스를 인버터 동작이나 충전기 동작 시에 겸용으로 사용함으로서 인버터나 충전기 각각의 제품을 구성하는데 사용된 제품 구성품에 비하여 매우 경제적이며, 저가의 마이크로 프로세스 (PIC16C74)를 사용하여 스위칭 동작 및 시？스 회로의 동작을 제어함으로서 전 체적인 제품의 구성을 간략화 하였다.

• Journal of Power Electronics
• /
• 제18권2호
• /
• pp.445-455
• /
• 2018

A novel algorithm is proposed to regulate the neutral point potential in neutral point clamped three-level inverters. Oscillations of the neutral point potential and an unbalanced dc-link voltage cause distortions of the output voltage. Large capacitors, which make the application costly and bulky, are needed to eliminate oscillations. Thus, the algorithm proposed in this paper utilizes the finite-control-set model predictive control and the multistage medium vector to solve these issues. The proposed strategy consists of a two-step prediction and a cost function to evaluate the selected multistage medium vector. Unlike the virtual vector method, the multistage medium vector is a mixture of the virtual vector and the original vector. In addition, its amplitude is variable. The neutral point current generated by it can be used to adjust the neutral point potential. When compared with the virtual vector method, the multistage medium vector contributes to decreasing the regulation time when the modulation index is high. The vectors are rearranged to cope with the variable switching frequency of the model predictive control. Simulation and experimental results verify the validity of the proposed strategy.

• 전력전자학회논문지
• /
• 제9권4호
• /
• pp.364-371
• /
• 2004

본 논문에서는 PWM 펄스를 랜덤하게 위치시킬 수 있는 새로운 3상 공간 벡터 RPWM(Random PWM) 기법을 제안한다. 기존의 RPWM 방식과 달리 3상 대칭 변조 기법에 의해 발생된 공간 전압 벡터 PWM(Space Vector PWM) 펄스를 랜덤하게 위치시키는 원리를 각 섹터마다 달리 적용하여 RPWM을 구현하는 기법을 제안한다. 제안 된 기법의 타당성 검증을 위하여, 제안된 RPWM 기법 알고리즘에 대해 MATLAB/SIMULINK를 이용한 시뮬레이션 및 DSP를 이용한 IGBT 인버터를 구성하여 실험을 수행한다. 특히 10,000 rpm 이상의 고속운전 시, 공간 전압 벡터 PWM 기법과 제안된 RPWM 기법에 의해 발생되는 인버터 출력 전류의 고조파 스펙트럼을 비교한다. 즉 전류 고조파 스펙트럼에서 스위칭 주파수 정수배에 해당하는 고조파의 크기를 비교하여 제안된 RPWM의 기법의 타당성을 검증하고자한다.