• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1322-1327
• /
• 2004

There are some previous studies that utilize constant impedance models or constant current models for electric trains to perform the static analysis of AT feeding systems. These mentioned models have some merits of linear systems but yield erroneous results because of the innate restraints of the models since linear models cannot represent the features of constant power in inverter-driven trains. From these reasons, it is suitable that the train be considered as a constant load model when it drives or as a constant source model when it applies regenerative brake. However, excessive rise of regenerative voltage during the braking may damage the vehicle itself and the feeding systems so the voltage must be restricted below a certain value. Keeping these facts in minds, we suggest new methods of analyzing AT feeding systems using the constant power models with the conditions of voltage constraints. The simulation results from a sample system using the proposed method illustrate both the states of system variables and the supply-demand relation of power among the trains and the systems very clearly, so it is believed that the proposed method yields more accurate results than conventional methods do.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.229-234
• /
• 2008

The new millennium has started with several innovations driven by fast evolution of the technologies in energy sector. A strong impulse towards the diffusion of new economical efficient technologies regulatory incentives related to energy production from renewable source and a small scale building trigeneration and to promotion of more sustainable environmental-friendly generation solutions, the evolution of electricity markets, more and more binding local emission constraints, and the need for improving the security of supply to reduce the energy system vulnerability. The 24 percentage energy quantify of total energy consumption consumes in commercial buildings and residential houses and the 30% portion of total $CO_2$ emissions covers also in the commercial buildings and residential houses sector. To cope with efficiently this energy sinuation in building sector, Building microgrid or building tooling, heating & power(BCHP) system has been interested in recent day due to meeting thermal and electric energy requirements efficiently and with appropriate energy quality. A multi agent system is a collective of intelligent agents that communicate with each other and work cooperatively to achieve common goals. Also, it is to medicate and coordinate communication between Control Areas and Security Coordinators for teal-time control of the BCHP system and the power pid. In this new circumstance, it is very important to integrate the power and energy delivery system and the information system(communication, networks, and intelligent equipment) that controls it. Therefore, development of smart control modules with open communication protocol and seamlessly interchange the data and information between control network and data network including extranet and intranet give a great meanings. We designed and developed the TCP/IP-CAN IED agent modules and ModBus./LonTalk/(TCP/IP) IED agent ones to configure the multi-agent system based smart energy network of commercial buildings and also intelligent algorithms for inverter fault diagnostics which ran be operated in control level or agent level network.

• 한국정보통신학회논문지
• /
• 제5권7호
• /
• pp.1314-1320
• /
• 2001

직류전동기는 자속 및 토크 제어가 간단하고 정밀하여 가변속 구동장치로 많이 사용된다 그러나 정류자와 브러시의 접촉 및 마모부분이 있으므로 정기적인 보수, 점검이 필요하며, 정류자의 정류 한계상 고속화 및 고압화에 문제가 있고, 대용량화에도 한계가 있으며, 설치하는 환경에도 큰 제약이 따른다. 따라서 이러한 단점을 극복하기 위해 직류전동기를 BLDC 전동기로 대치하여 가변속 제어하는 방법의 연구가 오래 전부터 지속되어 왔다. 본 논문에서는 PWM 인버터로 구동되는 BLDC 전동기의 수학적 모델을 전개하였고, 실험에 의한 파라미터 추정을 통하여 BLDC 전동기의 동특성 및 정상상태특성을 토크, 속도, 전압과 전류에 대하여 시뮬레이션 및 분석하였다.

• Journal of Power Electronics
• /
• 제1권2호
• /
• pp.117-126
• /
• 2001

A synchronous motor(SM) with q-axis special field winding of which the q-axis field-current compensates and cancels armature reaction can be driven at unity power factor under the conditions of transient state as well as steady state. The motor operates in high efficiency in all conditions. However, in order to obtain maximum performance of the motor, it is required that the time constant of armature circuit corresponds to that of q-axis field circuit. Inverse LQ(ILQ) design method on a basis of the pole assignment is suitable for this problem:(1) The time constants of the output responses can be designed for desired specifications, (2) Relations between feedback gains and response of closed loop system are very clear and (3) Optimal solutions can be given by simple procedure of ILQ method without solving the Ricaati's equation, compared to the usual LQ design method. Accordingly, the ILQ method can make the responses of armature current and q-axis field-current correspond. In this paper, it is proved by numerical simulations and experiments that the ILQ method is very effective for optimal regulator design of this plant and realizes a high-performance motor with unity power factor and high efficiency.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.109-116
• /
• 2009

This paper addresses the output control of a utility-connected double-fed induction machine (DFIM) for wind power generation systems (WPGS). DFIM has a back-to-back converter to control outputs of DFIM driven by the wind turbine for WPGS. To supply commercially the power of WPGS to the grid without any problems related to power quality, the real and reactive powers (PQ) at the stator side of DFIM are strictly controlled at the required level, which in this paper is realized with the Fuzzy PI controller based on the field orientation control. For the Sinusoidal Pulse Width Modulation (SPWM) converter connected to the rotor side of DFIG to maintain the controllability of PQ at the state side of DFIM, the DC voltage of the DC link capacitor is also controlled at a certain level with the conventional Proportion-Integral (PI) controller of the real power. In addition, the power quality at the grid connected to the rotor side of DFIM through the back-to-back converter is maintained in a certain level with a PI controller of the reactive power. The controllers for the PQ at the stator side of DFIM, the DC link voltage of the back-to-back inverter and the reactive power at the grid connected to the rotor side of DFIM are designed and simulated in the PSIM program, of which the result verifies the performance of the proposed controllers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.172-174
• /
• 1994

Due to the environmental considerations and the energy crisis, there has been a revival of electric vehicles since 1960s. Research and development work concerning with electric vehicles (EVs) was becoming more intense in last decade. As compared with conventional internal combustion engine (ICE) cars, EVs have the advantages of clean, quiet, better energy efficiency, less maintenance and improving the load factor of electric power systems. However, EVs usually have a snort running range, bad acceleration performance and high initial cost. The main reason for these shortcomings is the low figure of energy density and the high per energy cost of battery at present technology state. So it is very important to optimize the overall drive system design with respect to the maximum utilization of battery, energy, motor torque and inverter power. This paper describes a demonstration model of electric car which is driven by 4-wheel direct method using the vector control.

• 한국산학기술학회논문지
• /
• 제12권10호
• /
• pp.4308-4313
• /
• 2011

본 연구에서는 친환경 대형 버스 차량에 적용되는 루프형 전동식 냉방시스템의 성능특성을 파악하기 위하여 스크롤 압축기의 주파수 및 승차 공간의 온도인 내기온도를 변화시켜가면서 다양한 실험을 진행하였다. 이를 위하여 인버터로 구동되는 전동식 스크롤 압축기를 적용한 냉방시스템을 설계 및 제작 하였고 냉매 충진량 실험을 통하여 루프형 전동식 냉방시스템의 충분한 과냉도를 확보할 수 있는 최적 냉매 봉입량을 선정하였다. 압축기 주파수가 55 Hz에서 65 Hz로 증가함에 따라 냉방시스템의 증발용량은 4.3% 증가하였으나 냉방 COP는 14.1% 감소하였고, 내기온도가 $27^{\circ}C$에서 $35^{\circ}C$로 증가함에 따라 냉방시스템의 증발용량 및 COP는 각각 9.17%와 1.43% 증가하였다. 더불어 전동식 스크롤 압축기를 구동하는 인버터의 작동 효율은 내기온도 변화보다는 압축기 주파수 변화에 더 큰 영향을 받는 것을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제2권4호
• /
• pp.468-477
• /
• 2007

The DTC of voltage source inverter-fed PMSMs is based on hysteresis controllers of torque and flux. It has several advantages, namely, elimination of the mandatory rotor position sensor, less computation time, and rapid torque response. In addition, the stator resistance is the only parameter, which should be known, and no reference frame transformation is required. The DTC theory has achieved great success in the control of induction motors. However, for the control of PMSM drives proposed a few years ago, there are many basic theoretical problems that must be clarified. This paper describes an investigation into the effect of the zero voltage space vectors in the DTC system and points out that if using it rationally, not only can the DTC of the PMSM drive be driven successfully, but torque and flux ripples are reduced and overall performance of the system is improved. The implementation of DTC in PMSM drives is described and the switching tables specific for an interior PMSM are derived. The conventional eight voltage-vector switching table, which is namely used in the DTC of induction motors does not seem to regulate the torque and stator flux in a PMSM well when the motor operates at low speed. Modelling and simulation studies have both revealed that a six voltage-vector switching table is more appropriate for PMSM drives at low speed. In addition, the sources of difficulties, namely, the error in the detection of the initial rotor position, the variation of stator resistance, and the offsets in measurements are analysed and discussed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권2호
• /
• pp.94-100
• /
• 2005

Korea Electrotechnology Research Institute(KERI) has successfully developed a 100hp-1800rpm-class high temperature superconducting(HTS) motor with high efficiency under partnership with Doosan Heavy Industries & Construction Co. Ltd. This motor has a HTS field winding and an air-cooled stator. The advantages of HTS motor can be represented by a reduction of 50% in both losses and size compared to conventional motors of the same rating. The cooling system is based on the heat transfer mechanism of the thermosyphon by using GM cryocooler as cooling source. The cold head is in contact with the condenser of a Ne-filled thermosyphon. Independently, the rotor assembly was tested at the stationary state and combined with stator. The HTS field winding could be cooled into below 30K. Test of open-circuit characteristics(OCC) and short-circuit characteristics(SCC) and load test with resistive load bank were conducted in generator mode. Also, load tests in motor mode driven by inverter were finished at KERI. Maximum operating current of field winding at 30K was 120A. From OCC and SCC test results synchronous inductance and synchronous reactance were 2.4mH, 0.49pu, respectively. Efficiency of this HTS machine was 93.3% in full load(100hp) test. This paper will present design, construction. and experimental test results of the 100hp HTS machine.

• 한국음향학회지
• /
• 제41권5호
• /
• pp.481-491
• /
• 2022

능동 소나 송신시스템은 전기신호를 증폭하여 출력해주는 송신기와 증폭된 전기신호를 음향신호로 변환해주는 수중 음향 트랜스듀서로 구성된다. 일반적으로 송신기 출력 특성은 부하 임피던스에 의존적이며 송신기 부하인 수중 음향 트랜스듀서는 구동 시 전기적 임피던스가 주파수에 따라 크게 변화하는 특성을 갖는다. 이러한 가변 임피던스 조건에서는 능동 소나 송신시스템의 출력이 불안정해질 수 있다. 이에 본 논문에서는 능동 소나 송신시스템에서 수중음향 트랜스듀서의 가변 임피던스 조건에서도 안정적인 송신 신호를 전송하기 위한 소나 송신기의 설계 및 제어 기법을 제안하였다. 수중 음향 트랜스듀서의 전기적 임피던스 특성은 실험적 방법으로 분석하였고, 소나 송신기는 단상 풀브릿지 인버터, LC 필터와 정합회로로 구성하였다. 실시간으로 부하 특성이 변하는 Linear Frequency Modulation(LFM) 신호를 송신하면서 송신기와 트랜스듀서를 보호하고 안정적으로 출력 전압 특성을 확보할 수 있는 소나 송신기의 설계 및 출력 제어 기법을 제안하였으며, 시뮬레이션과 실험을 통해 타당성을 검증하였다.