• 융합신호처리학회논문지
• /
• 제5권2호
• /
• pp.151-158
• /
• 2004

본 논문에서는 디지털 필터 모델에 대한 역 필터링 기법을 제안한다. 이 기법은 안정한 non-causal IIR 역 필터를 안정한 causal 역 필터로 변환(근사)시키는 것이다. 실제로 이 역 필터에 대한 FIR 근사 방법을 제안한다. 전역통과 시스템에 대한 역 필터의 임펄스 응답은 그 시스템에 대한 임펄스 응답의 거울 영상(mirror image) 임을 알 수 있다. 특히 전역통과 시스템에 대한 임펄스 응답이 이러한 대칭성을 갖기 때문에, 제안한 기법은 다른 시스템 보다 전역통과 시스템에 더욱 유용하다. 제안한 역 필터링 기법을 설명하기 위하여, 네 개의 예제를 제시한다. 그들 중 둘은 전역통과 필터에 대한 것이며, 다른 두 개의 예제는 IIR과 FIR 필터에 대한 것이다. 또한 컴퓨터 시뮬레이션을 통하여 제안한 기법이 잘 동작함을 보인다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.487-491
• /
• 2009

The inverse halftoning is processing to restore the image made binary to former step image. There are smoothing and gaussian filtering in the technique so far. However, there are still a lot of insufficient points in past inverse halftoning. The removal of the noise and the edge enhansment are closely related in inverse halftoning. It is difficult to do both the noise rednctiom and the edge enhansment in high accuracy at the same time in the technique so far. The technique that can achieve both the removal of the noise and the emphasis of Edge at the same time is expected as future tasks. Then, it was tried to apply the Kalmann filtering to inverse halftoning. In the actual experiment, the effectiveness of the application of the Kalmann filtering to inverse halftoning comparing it with the technique so far was shown.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2479-2484
• /
• 2018

The filter bank multicarrier modulation (FBMC) technique is one of multicarrier modulation technique (MCM), which is mainly used to improve channel capacity of cognitive radio (CR) network and frequency spectrum access technique. The existing FBMC System contains serial to parallel converter, normal QAM modulation, Radix2 inverse FFT, parallel to serial converter and poly phase filter. It needs high area, delay and power consumption. To further reduce the area, delay and power of FBMC structure, a new clock gating technique is applied in the QAM modulation, radix2 multipath delay commutator (R2MDC) based inverse FFT and unified addition and subtraction (UAS) based FIR filter with parallel asynchronous self time adder (PASTA). The clock gating technique is mainly used to reduce the unwanted clock switching activity. The clock gating is nothing but clock signal of flip-flops is controlled by gate (i.e.) AND gate. Hence speed is high and power consumption is low. The comparison between existing QAM and proposed QAM with clock gating technique is carried out to analyze the results. Conversely, the proposed inverse R2MDC FFT with clock gating technique is compared with the existing radix2 inverse FFT. Also the comparison between existing poly phase filter and proposed UAS based FIR filter with PASTA adder is carried out to analyze the performance, area and power consumption individually. The proposed FBMC with clock gating technique offers low power and high speed than the existing FBMC structures.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.549-556
• /
• 1997

The inverse heat conduction problems is the calculation of surface heat transfer coefficients by utilizing measured temperature. The numerical technique of finite element analysis and optimizition is introduced to calculate temperatures and heat transfer coefficients. The calculated heat transfer coefficients and temperature distribution are good agreement with the results of direct analysis. The inverse method has been applied to the control valve of nuclear power plant.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.200-207
• /
• 1999

An efficient inverse design technique based on the MGM (Modified Garabedian-McFadden) method has been developed. The 2-D Navier-Stokes equations are solved for obtaining the surface pressure distributions and coupled with the MGM method to perform the inverse design. The solver is parallelized by using the domain decomposition method and the standard MPI library for communications between the processors. The MGM method is a residual-correction technique, in which the residuals are the difference between the desired and the computed pressure distribution. The developed code was applied to several airfoil shapes and the axial blade. It has been found that they are well converged to their target pressure distribution.

• 한국소음진동공학회논문집
• /
• 제11권9호
• /
• pp.431-438
• /
• 2001

This paper present experimental results of source identification for non-minimum phase system. Generally, a causal linear system may be described by matrix form. The inverse problem is considered as a matrix inversion. Direct inverse method can\`t be applied for a non-minimum phase system, the reason is that the system has ill-conditioning. Therefore, in this study to execute an effective inversion, SVD inverse technique is introduced. In a Non-minimum phase system, its system matrix may be singular or near-singular and has one more very small singular values. These very small singular values have information about a phase of the system and ill-conditioning. Using this property we could solve the ill-conditioned problem of the system and then verified it for the practical system(cantilever beam). The experimental results show that SVD inverse technique works well for non-minimum phase system.

• 한국컴퓨터그래픽스학회논문지
• /
• 제5권1호
• /
• pp.11-17
• /
• 1999

Example guided inverse kinematics (EGIK)는 기존의 역운동학(inverse kinematics)을 확장, 향상시키는 알고리즘이다. 기존의 역운동학은 모델자체의 redundancy에 기인하여 jerky한 동작을 만들어내는 단점이 있다. EGIK에서는 미리 측정된 동작데이타를 효과적으로 이용하여 이러한 redundancy문제를 해결한다. 이 때 end-effector 위치 차이와 관절각의 차이를 동시에 최소화하기 위해서 비선형 최적화 기술이 사용된다. 우리는 결과로서의 동작이 원래의 동작의 특성을 잘 보존하는 자연스러운 것임을 보인다. EGIK는 기존의 동작 데이타를 이용하여 다관절체의 동작을 생성해내는 효과적인 기술이다.

• 한국전산유체공학회지
• /
• 제3권1호
• /
• pp.37-45
• /
• 1998

A new and efficient inverse design method based on the numerical optimization technique has been developed. The 2-D incompressible Navier-Stokes equations are solved for obtaining the objective functions and coupled with the optimization procedure to perform the inverse design. The steepest descent and the conjugate gradient method have been applied to find the searching direction. The golden section method was applied to compute the design variable intervals. It has been found that the airfoil and the pump impellers are well converged to their targeting shapes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.446-449
• /
• 1988

A spectral inverse technique, which was developed by applying the pulse basis moment method procedure on the direct scattering problem in the reverse sequence for the reconstruction of complex permittivity profiles inside inhomogeneous dielectric objects, is modified to be applicable to the moment method with series-expanded basis. By performing numerical simulations for various type of dielectric objects, it is demonstrated that this inverse technique provides close reconstruction of permittivity profiles. Futhermore, compared to the previous scheme of the pulse basis, the presented method is shown to reduce the computation cost, relative error of reconstructed permittivity profiles by averaging in each cell, and the ill-posedness inherent to this inverse scattering problem.

• 한국항공우주학회지
• /
• 제30권7호
• /
• pp.98-104
• /
• 2002

본 연구에서는 역섭동법을 이용한 손상탐지의 효율을 개선하는 목적으로 시스템 축소기법을 사용하였다. 이 방법은 손상탐지의 미측정 자유도를 측정된 자유도로 변환하여 역섭동법의 계산효율이 향상되는 장점이 있으나, 부정확한 자유도의 변환으로 수치적인 안정성이 저하될 수 있다. 따라서 자유도 변환식을 수치해법 과정에서 반복적으로 개선하는 방법과, 매우 정확한 accelerated improved reduced system (AIRS) 축소법의 사용으로 역섭동법의 수치적 불안정성을 해결하였다.