• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.4
• /
• pp.249-256
• /
• 2007

This experiment was conducted to compare the agronomic characteristics and productivity in introduced hairy vetch cultivars and developed new Korean Hairy vetch cultivars in two areas of the experimental field of Grassland and Forage Crops Division, National Institute of Animal Science from 2005 to 2006. The experiment was arranged in randomized complete block design with three replications. A total of 11 hairy vetch cultivars used in this study including 9 introduced cultivars (Penn-02, Sander, Latigo, Welta, Ostsaat, VV4712, Minnie, Barlosa and Capello) and 2 Korean cultivars (Cold green and Cheong pa). The early flowering varieties of Minnie, Barlosa, Capello and Cold green were grown as early maturity cultivars, while the late flowering varieties of Penn-02, Sander, Latigo, Welta, Ostsaat, VV4712 and Cheong pa were grown as medium and late maturity. The winter hardiness of hairy vetch was good except for Minnie, Barlosa and Capello of early maturity cultivars. In this study, dry matter yield of VV4712 was the highest of 11 hairy vetch cultivars. And dry matter yield of medium and late maturity vetch increased in the middle region while that of early maturity increased in the south. The new Korean cultivar, Cheong pa, as a medium and late maturity hairy vetch was not bad compared to introduced cultivars and Cold green as an early maturity hairy vetch was an excellent cultivar compared to introduced cultivars in both regions. Latigo in NDF (neutral detergent fiber) and Welta in ADF (acid detergent fiber) were lower than other cultivars, while Sander in IVDMD (in vitro dry matter digestibility) and CP (crude protein) content were higher than other cultivars. The results of this experiment indicated that the productivity of hairy vetch cultivars was highest in VV4712, and Cheong pa and Cold green of new Korean cultivar were the promising cultivars of hairy vetch in Korea.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.1
• /
• pp.34-41
• /
• 1994

This experiment was carried out to select the $Sorghum{\times}Sudangrass$ hybrid of high productivity suited for soiling, and growth characteristics and productivity of 9 cultivars of introduced $Sorghum{\times}Sudangrass$ hybrids have been evaluated at the experimental forage field, College of Natural Science of Kon-Kuk university in Chungju over three years. The results obtained are summarized as follows : 1. NC855, Sordan79 and T. E haygrazer were taller than the other varieties as range from 209cm to 213cm. while Supergrazer was the shortest type as 173cm. Among the nine varieties used, NC855 and Pioneer 988 were classified as early maturing varieties, but G83F, FP5 and Supergrazer were classified as lately maturing varieties. 2. The stem diameter of Supergnzer and Sordan79 were thicker than the other varieties, while NC855, Garst757 and FP5 were thin. 3. The tillers of $Sorghum{\times}Sudangrass$ hybrids were ranged from 3.1 to 4.0 and NC855 and FP5 had 4.0 tillers per plant. The dead stubble of Sordan79 was the lowest as 4.0 percentage, while Supergrazer was the highest as 9.8 percentage(P<0.05). 4. GW9110G and T. E haygrazer were susceptible to lodging(P

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.4
• /
• pp.33-42
• /
• 2000

This study is carried out to investigate plant community structure, actual vegetation map and flora for examining the relationship between naturally introduced vegetation and surrounding vegetation in Hamtae coal-mined spoil lands. According to the analysis of vegetation, surrounding vegetation was divided into five plant community groups : Pinus koraiensis community, Pinus densiflora - Quercus mongolica community, Q. mongolica - Deciduous broadleaved trees community, Betula schmidtii - B. davurica community, Larix leptolepis community. Robinia pseudo-acacia, which had been planted, was dominant species in coal-mined spoil lands. Young trees, which were naturally introduced, such as B. schmidtii, B. davurica etc., partially appeared with the high density($15{\sim}19ea/100m^2$) in coal-mined spoil lands. The flora of this area was listed as 54 taxa; 22 families, 42 genus, 50 species, 3 varieties and 1 forma. Especially Spodiopogon sibiricus, Miscanthus sinensis, Arundinella hirta, Artemisia capillaris, Artemisia iwayomogi and Youngia denticulata appeared with the high frequency. It is estimated that the proper way for harmonious and effective revegetation is to target B. schmidtii - B. davurica communities and to seed B. schmidtii - B. davurica mixing highly frequent herbaceous species.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.2
• /
• pp.98-105
• /
• 2020

This experiment was conducted to a comparison of the productivity according to variety and forage quality by plant parts of imported silage corn (Zea mays, L) in Pyeongchang. The corns evaluated in this experiment were 8 varieties (P1184, P1151, P1194, P1543, P1345, P1429, P1443, and P2105) introduced from the United States, Pioneer Hybrid Co. The harvested corn was divided into 5 plant parts (leaf, stem, cob, husk, and grain), and the ratio of each part was calculated using dry weight and the feed value was analyzed. The emergence rate of corn was generally good except for the P1151 and P2105 varieties. The average tasseling date was July 24^th and the silking date was July 27^th, but the P2105 variety was late to July 28^th and August 1^st, and the remaining varieties were similar. P1345 was the highest (289 and 123 cm), and P1151 varieties were the lowest (267 and 101 cm) in the plant and ear height. Disease resistance was low in P1184, P1443 and P1429, and P1197 and P1345 were high. In the case of stover, the dry matter (DM) content was the lowest at 19.6% in the P1151 and the highest at 24.9% in the P1429. DM content of ear was the highest in the P2105 (55.5%), and P1184 (54.2%) and P1345 (54.3%) were also significantly higher (p<0.05). The DM yield of stover of P2105, P1429 and P1194 varieties was significantly higher (p<0.05), and ear yield of P2105, P1345 and P1443 was higher. The proportions of each part of plants (leaf, stem, cob, husk, and grain) divided by 5 was high, with 50-60% of the ear(grain+cob) ratio. The ratio of husk and cob was roughly similar, and the leaf and stem part showed a ratio of about 20%. The crude protein (CP) content was highest in leaf, followed by grain. The CP content of the stem was the lowest, and the husk was not significantly different among the varieties (p>0.05). The acid detergent fiber (ADF) content was similar to the rest parts except grain, but the leaf part tended to be lower, and other parts except the stem and leaf showed no significant difference between varieties (p>0.05). There was no significant difference in NDF (neutral detergent fiber) content in husk, but there was a difference between varieties in other parts (p<0.05). In addition, there was a special difference by plant parts for each variety, P2015 on the stem, P1197 on the leaf, P1151 on the cob, P1197 on the husk, and P1197 on the grains with high NDF content. IVDMD (in vitro dry matter digestibility) was not significantly different between stems and grains, but there was a difference between varieties in cobs and husks. According to the results, DM yield of P2105 variety was the best in the experiment, and the ratio of grain was excellent in P1543 and P1345. In addition, it was found that the feed value was higher in the leaves and grains, and the leaf and stem had higher feed values than husk or cob.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.108-112
• /
• 1989

To determine optimal plant density of forage rape in southern areas of Korea, Velox, the highest yielding variety among seventeen introduced varieties of forage rape, was grown under five different plant densities. The results obtained are summarized as follows: 1. Yield components such as stem diameter, number of main stem,leaves, number of branches and number of branch leaves and fresh yield were highest at the plots with 50cm row spacing and 30cm plant spacing. 2. Dry matter yield, content of crude protein, IVDMD and digestible dry matter yield were highest at the plots of broadcasting. 3. Since plants under high density were high in plant length and small in stem diameter, contents of crude fiber such as NDF, ADF, cellulose and lignin were lowest at the plots of broadcasting.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2006

The major dominant fluoride-endurance (Dfe) gene was introduced into the commercial varieties by crossing and pedigree selection to breed silkworm races that could normally develop in the area that polluted by fluoride. After backcrossed for two generations, the Dfe gene was made homozygous, and individuals with good economic characters were selected to generate next generation. After 8 generations of selection, their characters became stable, and the silkworm variety which is resistant to fluoride, Huayuan${\times}$Dongsheng, for spring rearing were bred.

• Journal of Science of Art and Design
• /
• v.5
• /
• pp.5-34
• /
• 2003

This study aims at the observation of some analytical levels-especially those of syntactico-semantical- of the visual expressions in general. As far as the syntactical parts are concerned, there were two steps to be approached. One is to select the paradigms according to the Saussure-Hambidgean suggestions, the other to derive syntagmas from what is called the 'chaos-system', one of nonlinear dynamics. In result, paradigms could be acquired 5 sorts with its so many varieties, as visual templates(VT), supplemented by their reciprocals(R) and complements(CLE), and syntagmas five orbits from each constant c=0 to c=10. In additional, in connection with semantic parts, the study introduced a Gremasian model of discourses and narratives for the interpretation of signifiers. By this, we could cover the conjunctive relationships(+) and the disjunctive(-) of the whole structure of visual expression. Finally, we certified that the above could be fully approved in terms of recent worldly cognitive scientic psychological discoveries.

• Plant Resources
• /
• v.6 no.1
• /
• pp.11-15
• /
• 2003

To determine as optimal sowing time of forage rape in spring time in southern areas of Korea, forage rape cv. Velox, the highest yielding variety among introduced varieties of forage rape, was grown under five different sowing times. Yield components such as plant length, number of branches and number of leaves etc. were higher at the sowing time of Mar. 15 and Mar. 25. The plants sown at Mar. 15 and Mar. 25 also showed highest fresh and dry matter yield. When plants were grown under later sowing time, they showed higher values in content of crude protein and lower values in contents of crude fiber such as Neutral Detergent Fiber (NDF), Acid Detergent Fiber (ADF), cellulose and lignin. There was no relationship between variation of In Vitro Dry matter Digestibility (IVDMD) and sowing time. The plants sown at Mar. 15 and Mar. 25 showed highest digestible dry matter yields.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.10 no.1
• /
• pp.56-70
• /
• 2001

The use of resin-bonded fixed partial dentures described in the early 1980s caused an conservative way to preserve tooth structure in the restorative dental community. The treatment of patients with requires long term analysis of clinical application and basic research. Failure rates of these prosthesis ranged from 3% to 55%. These varieties were orginated by different techniques, materials, tooth preparation methods and diverse clinical situations. This article review was focused on the standard long term results and in vitro studies on bond strength between metal and teeth. From this, many useful clinical guidelines to RBFPD could be adopted to clinical dentistry. For successful results, careful case selection and good clinical skills are needed. And appropriate techniques for each situations should be adopted. Also, RBFPD using new materials like all-ceramics, FRC/Ceromer was introduced.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.4
• /
• pp.444-452
• /
• 2003

An integration system with multi-measurement sets can be realized via combined application of a centralized and federated Kalman filter. It is difficult for the centralized Kalman filter to remove a failed sensor in comparison with the federated Kalman filter. All varieties of Kalman filters monitor innovation sequence (residual) for detection and isolation of a failed sensor. The innovation sequence, which is selected as an indicator of real time estimation error plays an important role in adaptive mechanism design. In this study, the centralized Kalman filter with adaptive measurement fusion is introduced by means of innovation sequence. The objectives of adaptive measurement fusion are automatic isolation and recovery of some sensor failures as well as inherent monitoring capability. The proposed adaptive filter is applied to the GPS/SDINS integration system with an additional sensor. Simulation studies attest that the proposed adaptive scheme is effective for isolation and recovery of immediate sensor failures.