• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.233-238
• /
• 2001

In road Pavements, it is known that cement concrete pavement has superior durability, safety compared with asphalt pavement. But in repairing pavement, cement concrete pavement is not usually applied because of the length of time while the road is interrupted when using Ordinary and Rapid-hardening Portland Cement. And Super High Early Strength Cement and Ultra Super High Early Strength Cement are not favorable for ready mixed concrete because of rapid setting time, high slump loss and other restrictions. We aim to develope special cement and concrete developing 1 day strength of over 300 kg/$\textrm{cm}^2$ to open the road within one day and workable time is maintained over 1 hour that can be used as ready mixed concrete. In this study, we produced cement using rapid-hardening cement, Hauyne clinker, anhydride gypsum and accelerator and studied on its properties. The comperssive strength was over 400 kg/$\textrm{cm}^2$ and tensile at 1 day and workable time was maintained for over 1 hour.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.309-311
• /
• 2008

This paper introduces the characteristics of relationship between probabilistic reliability (LOLE; Loss of Load Expectation) and deterministic reliability (SRR; supply reserve rate) for 2008 year in Korea power system. Korea power system has been using the LOLE criterion to determine the adequacy of installed capacity (ICAP) requirement. The criterion is that load shall not exceed the avaliable capacity, on the average, more than five day in ten years. The probabilistic reliability evaluation and production cost simulation program which is called PPHFHT was used in order to obtain the relationship in this paper.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.47-55
• /
• 1999

This paper develops an efficient heuristic algorithm for scheduling workforce level that can accommodate all the requested maintenance jobs. Each job has its own release and due dates as well as man-day requirement, and must be scheduled in a non-interrupted time interval, namely, without preemption. Duration of each job is not fixed, but to be determined within given specific range. The objective is to minimize workforce level to complete all the requested maintenance jobs. We show that the problem can be seen as a variant of the two-dimensional bin-packing problem with some additional constraints. A non-linear mixed integer programming model for the problem is developed, and an efficient heuristic algorithm based on bin-packing algorithms is proposed. In order to evaluate goodness of the solution obtained from the proposed algorithm, a scheme for getting a good lower bound for the optimum solution is presented and analyzed. The computational experiment shows that the proposed algorithm performs quite satisfactorily.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.373-381
• /
• 2013

In this paper, the effects of phase noise on the radar system were analyzed in terms of 3 point of view. The impact(s) on the compressed pulse waveform, the FMICW(Frequency Modulated Interrupted Continuous Wave) radar performance and the receiver sensitivity were investigated. From the investigation, it was indicated that the phase noise over 10 kHz offset frequency makes the side lobe level of compressed pulse worse. Also it was founded that the FMICW radar performance, especially at the noise level of range profile, is related to the phase noise. Finally, the investigation showed that the phase noise at local oscillator affects the receiver sensitivity.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.327-332
• /
• 2009

Purpose: Several methods of the nipple reduction have been reported. However, the methods described previously are difficult or have some demerits. This study proposes a simple technique for reduction of the nipple height as well as diameter. Methods: The purposed nipple height is marked. A pentahedral design of excision was marked around the nipple. Local anesthetic solution was infiltrated and a 4 - 0 Nylon traction suture was applied at the nipple apex. Excision of the nipple inside both two triangles and a rectangle was made. Remaining two flaps were approximated using 5 - 0 Nylon simple interrupted sutures. However, a part of wound closure was not done in the central area of the nipple. Results: 83 patients(166 nipples) underwent this procedure from December 1999 to December 2008. Follow up ranged from 6 months to 2 years with a mean of 10 months. 78 patients were female and 5 patients were male. No major complication occurred and remaining scars were very inconspicuous. Conclusion: This simple technique has the advantage of nipple reduction in both height and diameter, and provides good aesthetic outcomes.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.662_663
• /
• 2009

Motor bus transfer involves the process of transferring a bus that has several critical motors to an alternate source of power when the main normal power source feeding them is interrupted. Bus transfer is a time-critical application in which the transfer progress depends on various parameters such as the type of motor, load on the motor at the time of transfer, inertia of the motor, and the combined open-circuit time constant of various motors present on the bus at the time of transfer. This paper present the result of modeling and simulation of nuclear power motor bus using ETAP(Electrical Transient Analyzing Program) program for motor and motor bus residual voltage decay characteristics.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.3
• /
• pp.133-137
• /
• 2011

The purpose of smart grid is the low $CO_2$ through expansion of renewable energy. To achieve the purpose of smart grid, typical radial power distribution system will be changed to loop power distribution system. The loop power distribution system have many advantages such as low power loss, low voltage drop, and increase of connection of renewable energy. In this paper, the algorithm for minimization of interrupted section of power distribution system is proposed through communication between circuit breaker and recloser in loop power distribution system. The proposed algorithm is proved through case studies about reliability evaluation

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1080-1084
• /
• 2007

Many different methods for sound source localization have been developed. Most of them mainly depend on time delay of arrival (TDOA) or on empirical or analytic head related transfer functions (HRTFs). In real implementation, since the direct path between a source and a sensor is interrupted by obstacles as like a head or body of robot, it has to be considered the number of sensors as well as their positions. Therefore, in this paper, we present the methods, which are included sensor position problem, to localize the sound source with 4 microphones to cover the 3D space. Those are modified two-step TDOA methods. Our conclusion is that the different method has to be applied in case to be different microphone position on real robot platform.

• Journal of Chest Surgery
• /
• v.12 no.4
• /
• pp.429-433
• /
• 1979

Morgagni hernia is a rare condition of the congenital diaphragmatic hernia which Is located at the anteromedial portion of the diaphragm, and is located immediately posterior to the sternum. Its cause is considered by embryologic defect and the abdominal organs are passed through a defect. The incidence is predirected women over 50 years old. Its synonym is hernia of subcostosternal, retrosternal, parasternal, rectocostoxiphoid, anterior diaphragmatic or Larrey`s. This report presents a symptomatic Morgagni hernia of ten months old male child on whom the diagnosis was established and was operated at the Busan Gospel Hospital. This patient was admitted with the chief complaints of mild cyanosis, frequent upper respiratory infections and protrusion of the right lower anterior chest. Herniorrhaphy was performed through the upper abdominal midline incision, hernial contents of the omentum and the colon, and sac as noticed from the Larrey`s space measuring 4 x 2 cm. in diameter and oval in shape. Interrupted sutures without difficulty repaired the defect. The cyanosis was disappeared and the patient had uneventful course of post-operative period. The patient was discharged at 7th. postoperative day. This case presentation with a brief review of literatures is given.

• Journal of Chest Surgery
• /
• v.25 no.9
• /
• pp.891-899
• /
• 1992

Esophageal atresia with tracheoesophageal fistula may occur as separate, but usually occur in combination. First described by Thomas Gibson in 1696, esophageal atresia was not successfully treated until 1939 when the first two survivors of staged correction were described by Ladd and Leven. In 1941, Haight and Towsley performed the first successful one-stage primary repair. We report three cases of esophageal atresia with tracheoesophageal fistula of which were treated with one-stage surgical repair method. The operation was performed tra-nspleurally through right 4th intercostal space. The fistula in the trachea was closed with interrupted 5-O prolene sutures and esophagoesophageal anastomosis was performed with 3-O prolene single layer sutures in all cases. All patients tolerated the operative procedures and recovered uneventfully. On follow-up study, anastomotic stricture was developed in one patients, so esophageal dilatation was performed for it with the Griintzig balloon catheter and the result was satisfactory. The other patients were well-being without any complication.